pu used for sale

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc.

Processing pump Manufacturer: Maso Sine Pump Type: SPS-3" No°: 61210497 speed-controlled good condition with cover LWH: 1600 x 700 x 520 mm

centrifugal pump Power: approx. 2 kW very good condition standing on feet LWH: 500 x 250 x 410 mm

vacuum pump Manufacturer: Rieetschle Type: TR 40 V (91) Year of construction: 1988 Pumping speed: 45 m³/h (water) very good condition with vacuum regulator valve three items in stock with operating instructions LWH: 500 x 350 x 500 mm

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KRP50/832107/6286 Year of construction: 1988 Power: 3.8 kW LWH: 440 x 270 x 400 mm

Centrifugal pump Manufacturer: Hans Schuy GmbH Type: KSP50/6399/772097 Year of construction: 1990 Power: 2.05 kW very good condition LWH: 460 x 240 x 400 mm

Centrifugal pump Manufacturer: VEB Kyffhäuserhütte Artern Type: KSP 65/180-1,3 Item #: 98605 Year of construction: 1987 Power: 3.8 kW standing on feet very good condition LWH: 560 x 250 x 450 mm

CONTROLS   electronic controls ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz Like-new (1-year-old) high-pressure pump 69 bar

3 × Hughes HPS 2200 High Pressure Pumps 320 bar – 228 l/min, used For sale are three used Hughes HPS 2200 high-pressure pumps in 100% working condition. The pumps were only taken out of service because the associated diesel engines and controls were needed for another project. Technical data Manufacturer: Hughes Pumps Ltd. (England) Model: HPS 2200 Max. operating pressure: 320 bar Flow rate: 228 l/min Pump speed: 400 rpm Input speed: 1,800 rpm Gear ratio: 4.50 : 1 Transmission oil: EP90 Oil capacity: 18 litres Years of construction 2 × built in 2010 (yellow pumps) 1 × built in 2009 (blue pump) ✔ 100% functional condition The operating hours cannot be specified because the original diesel engines and controls were already dismantled before storage. The pumps are suitable for a wide range of industrial applications, including water pumping, mining, mari ...

Centrifugal pump Manufacturer: BP Lubrication Smering Item #: X064200/64/VE Power: 7.5 kW Speed: 2880 rpm LWH: 700 x 350 x 450 mm

centrifugal pump Manufacturer: GEG Alsthom Electrical Machines (Australia) Item #: 0412280/10/VD Power: 5.5 kW Speed: 2880 rpm LWH: 750 x 350 x 500 mm

Centrifugal pump Manufacturer: BP Lubrication Smering No.: 0405970/02/VC Power: 4.0 kW very good condition with cover Speed: 2800 rpm LWH: 700 x 400 x 400 mm

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 5-groove pulley type SPB -V-belt width: 17 mm -Receiver: Taper bushing Ø 55 x 45 mm -Dimensions: Ø 178 x 80 mm -Weight: 7.9 kg

centrifugal pump LWH: 1000 x 380 x 570 mm Manufacturer: SABS (South Africa) Engine power: 15 kW with cover Speed: 1450 rpm

centrifugal pump Engine power: 1.5 kW good condition LWH: 470 x 320 x 400 mm

centrifugal pump Manufacturer: Hilge Type: Durietta I-100-60,75 Item #: S7 6253 Engine power: 0.86 kW LWH: 370 x 240 x 280 mm

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPB -V-belt width: 17 mm -Hole: Ø 60 x 70 mm -Dimensions: Ø 230 x 82 mm -Weight: 9.7 kg

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPB -V-belt width: 17 mm -Hole: Ø 30 x 62 mm -Dimensions: Ø 135 x 90 mm -Weight: 4.2 kg

Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg

Large Format 3000 x 1500mm With Automation Siemens 840

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 970 mm -Flange outer diameter: 245 mm -Flange inner diameter: 125 mm -Pump diameter: 210 mm -Weight: 180 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool intermediate block -Dimensions: see photos -Dimensions: 310/17/H110 mm -Weight: 22.6 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, die-cutting tool for holding dies -Bore: Ø 73 mm / Mounting Ø 90 mm / Hole spacing 90/75 mm M10 -Dimensions: see photos -Dimensions: 200/100/H120 mm -Weight: 6.8 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Mubea, die-cutting tool for holding dies -Hole: Ø 35 mm -Dimensions: see photos -Dimensions: 235/105/H130 mm -Weight: 11.1 kg

Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: for holding dies -Hole: Ø 100/43 mm -Dimensions: see photos -Dimensions: 345/280/H245 mm -Weight: 55.9 kg

Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Reference Num.: 3657 Brand: Beil Type: 780/425-S-H-AP Construction year: 1999 Available: directly Status: Not in production Location: Deutschland

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 112 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 7 units, drilling and thread cutting 8 units, drilling and sinking 5 units, drilling, sinking and thread- cutting 2 unit), spindle taper SK 40 each, engine power of the individual units between 4.0 and 4.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stations: 10 / 22 tool taper: SK 40 control: SIEMENS SIMATIC OP 3 total power requirement: ca. 130 kW = transfer machine Shift drum with 10 workpiece stations, 22 machining units (drilling 10 units, drilling and thread cutting 5 units, drilling and sinking 3 units, drilling, sinking and thread- cutting 1 unit, thread cutting 3 units), spindle taper SK 40 each, engine power of the individual units between 4.5 and 5.5 kW, SIEMENS control SIMATIC OP 3, assembly robot ABB Accessories.: chucks (without jaws), chip conveyor, coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Separating tool, punching tool, punch, punch die, punch stamp, -Punch tool: Intermediate block -Bore: Diameter 65 mm -Dimensions: see photos -Dimensions: 370/250/H125 mm -Weight: 46.7 kg

Max. working width: 430mm, binding element diameter range: 4.7mm-31.75mm, documentation available. An on-site inspection is possible.

DEPA Compressed Air Diaphragm Pump Manufacturer: Alfa-Laval Type: DL40-UL-T-T Item #: 09855 Year of construction: 1999 LBH: 350 x 460 x 700 mm

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

Vacuum pump Manufacturer: LEMA 25 AZ FAA OA O Item #: D-3402461 LBH: 350 x 180 x 220 mm

Separating tool, punching tool, punch, punch die, punch stamp, -Stamping tool: Die holder with fine adjustment -Bore: Ø 25 mm -Dimensions: see photos -Dimensions: 300/250/H210 mm -Weight: 32.1 kg

Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Punching tool: Holder for punching tool -Holes: Ø 60 mm -Dimensions: see photos -Dimensions: 253/71/H104 mm -Weight: 6.6 kg

Vacuum pump Manufacturer: Busch Type: SV 1040 C 000 10XX Item #: 00445000075 Final pressure: 120 mbar Power: 1.25 kW

Vacuum pump Manufacturer: Grundfos Type: CH12-30 A-W-A-CVBV LBH: 400 x 180 x 240 mm

Centrifugal pump Manufacturer: Fristam Type: FP7028 Item #: 02130032 Power: 0.25 kW LBH: 450 x 180 x 300

Centrifugal pump Manufacturer: Fristam Type: FP712C Item #: 414433417 Power: 1.1 kW Speed: 2880 rpm LBH: 530 x 270 x 430 mm

CNC Punching Machine manufactured in 2007. This BOSCHERT Compact 1000 features a working range of 1,000 × 2,000 mm and a maximum punching force of 280 kN. It is capable of handling workpieces up to 150 kg and can punch holes with a diameter of 105 mm. If you are looking to get high-quality sheet metal punching capabilities, consider the BOSCHERT Compact 1000 machine we have for sale. Contact us for further details.

Pressure comparison test pump Leitenberger BT 400 DM Test pressure source for exact testing, adjustment and calibration pressure gauges, pressure switches and pressure sensors. Manufacturer: Druck & Temperatur, Leitenberger GmbH Model: BT400 DM (digital version) Pressure range: up to 400 bar (hydraulic) For testing and calibrating pressure gauges. Integrated precision digital reference pressure gauge. Precision pressure gauge for visual control. Two test specimen connections for two pressure gauges. Medium: Hydraulic oil or water (depending on the seal kit). How it works: Manual screw pump for pressure generation, the generated test pressure can be calculated with the integrated volume variator sensitively. Application examples & areas of application: Test pressure source for calibration purposes, pressure comparison test pump, pressure comparison test bench, pressur ...

Vacuum pump Manufacturer: Busch Type: RC 0025 E 501 Item #: 02006242 Pressure: 20 mbar Power: 0.75 kW LBH: 560 x 310 x 420 mm

Centrifugal pump Manufacturer: Siemen & Hinsch Type: AKHE 1202 Item #: BN 08424 Power: 1.75/0.8 kW LBH: 880 x 500 x 1050 mm 2 copies in stock

Pump Manufacturer: AL-KO Geräte GmbH Type: HW A 1001 INOX Item #: 112 461 Flow rate: 4 m³/h LBH: 380 x 230 x 480 mm

201122,146 h180 kN400 V / 50 Hz18 kVA24 V DC3 x 25 A7 - 14 bar05/2026Tool cassettes, various punches and dies, MultiTool, Easy Type

ThyssenKruppHPD 4037-OEM20214000 bar3.8 l/min19 mm37 kW1980 kgused, low operating hours per seller

A small Alfred Reith bench punch is available. Punching force: 50kN, max. round hole diameter: 60mm, max. square hole dimensions X/Y: 46mm/46mm, max. mild steel sheet thickness: 3mm, max. stainless steel sheet thickness: 2mm, max. aluminum thickness: 4mm, throat depth: 500mm, stroke: 66mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.