pu used for sale

Hydraulic Pump available for sale. Make: Hydrostar Type: SPV9M Serial Number: 2903900/R PN: 12.5 Vgn: 147.6 Nn: 1450 Made in Poland

HYDRAULIC PUMPS - 3Nos MAKE: KAWASAKI HEAVY Ind. JAPAN TYPE: BZ732S215LH REGISTERED TYPE: R3041L-2SOL

Double pump for Battenfeld SYDFEE-20/140R MNR: R900730346 SYDFEE-20/045R MNR: R900703325

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 009 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 150/125/H120 mm -Weight: 3.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 1 517 222 492 -Shaft: Ø 16 / 17 x 8 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 116/90/H120 mm -Weight: 2.7 kg

Our Pfeiffer Vacuum HiPace 2300 is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our Pfeiffer Vacuum HiPace 2300 wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 3-stage Ø120/92/72 mm -V-belt width: 10 mm -Mounting: Ø 42 mm -Dimensions: Ø120 x 40 mm -Weight: 0.5 kg

Hose pump for conveying corrosive, abrasive, highly viscous or highly dense liquids. Due to its simple design, the pump is self-priming, low-wear and dry-running. Manufacturer: Delasco Type: DSC65PA1S Y.O.M.: 10/2001 Q= 3.1 a / 14.95 m3/h P= 15 bar with geared motor SEW-Usocome 220/380 V; 11 kW; 1440/ 7.2/44.0 rpm Inlet opening approx. 55/100 mm Total approx. 1400 x 1300 H 1150 mm

Parker,Denison P7P Hydraulic Pump available for Sale. Make: Parker,Denison Model No.: P7P3R1A5A2BOOXM204381 Code No.: 023-04381-0 Serial No.: 002042465;002045084 Macgregor Article No.:1875241-801 U.S.A.

V-belt pulley, belt pulley, double-wheel pulley -V-belt pulley: 2-groove pulley type SPZ Ø 125 mm -V-belt width: 10 mm -Hole: Ø28 mm -Dimensions: Ø125 x 55 mm -Weight: 0.6 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 150 mm -Type: unknown -Mounting: Ø 55 mm -35 teeth: belt width 25 mm -Division: see photos -Quantity: 1x timing belt pulley available -Dimensions: Ø 150 x 45 mm -Weight: 3.4 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 25 mm -26 teeth: belt width 32 mm -Quantity: 4x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 50 mm -Weight: 0.3 kg/pcs

Excenter screw pump Manufacturer: Resch Type: 2RBL 150 Built: 1998 Speed: 309 rpm Power: 0.37 kW at 1360 rpm very good condition LWH: 850 x200 x 170 mm Product inlet DM 25 (milk tube fitting) Weight: approx. 15 kg 3 in stock

Excenter screw pump Manufacturer: Fryma Type: N20A Built: 1990 with Stöber gearbox speed-controlled Speed: 126/880 rpm very good condition LWH: 1250 x 300 x 300 mm

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 24 mm -26 teeth: belt width 32 mm -Quantity: 5x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 53 mm -Weight: 0.3 kg/pcs

Centrifugal pump, water pump, block pump, volute casing pump -Manufacturer: Ebara, centrifugal pump type CDXHM/A 200/20 -Flow rate: 80-250 l/min -Motor power: 1.5 kW -Speed: 2850 rpm -Pipe connection: see photos -Dimensions: 445/210/H240 mm -Weight: 15.7 kg

Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm -Weight: 207 kg

Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm

Excenter screw pump Manufacturer: Fryma Type: N20A Built: 1987 Speed: 700 rpm very good condition LWH: 1200 x 350 x 410 mm

V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 5-stage Ø 40 to 90 mm -Hole: Ø 14 mm -Number: 6x pulley available -Price: per piece -Dimensions: Ø90 x 55 mm -Weight: 0.8 kg/piece

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 10 mm -Length: 10 m -Transport dimensions: 370/330/H130 mm -Weight: 3.9 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: 360/90/H400 mm -Weight: 12.4 kg

Excenter screw pump Manufacturer: Fryma Power: 0.55 kW Built: 1990 speed-controlled LWH: 1100 x 300 x 300 mm

Excenter screw pump Manufacturer: Fryma Type: NE20A Built: 1987 Power: 0.55 kW good condition LWH: 1100 x 300 x 270 mm

Centrifugal pump Manufacturer: Alfa-Laval (Sweden) Type: ME-155AE N°: 31452-695 Capacity: 30,000 l/h (water) at 28 m height very good condition LWH: 830 x 300 x 450 mm

Pull-wire emergency switch, emergency stop switch, pull-wire emergency switch -Manufacturer: Kiepe, pull-rope emergency switch -Type: SEB 00? see photos -Dimensions: 240/130/H150 mm -Weight: 5.3 kg

push rod -Push rod: hole spacing 288 mm -Mounting: Ø 35 / 22 mm -PipeØ: 60 mm -Dimensions: 360/75/H75 mm -Weight: 5.7 kg

Maso pump Manufacturer: maso Process-Pumpen Type: PLC-2.5" N°: 74741299 speed-controlled good condition LWH: 1350 x 360 x 520 mm

Special pump Manufacturer: MOSVEX Type: S6C AL N°: 446149 LWH: 1100 x 400 x 500 mm

Process pump Manufacturer: Maso Type: Plc-2" N°: 111050205 with CE mark very good condition Engine: SEW-EURODRIVE Power: 1.5 kW IP66 LWH: 950 x 220 x 340 mm

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 228 mm -Type: D TB 90-8M-50 -Number of teeth: 90 teeth / Belt width: 50 mm -Mount: Taper clamping bushing 3020-40 / Ø 40 x 50.8 mm -Dimensions: Ø 228 x 60 mm -Weight: 12 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 87 mm -Type: 32-8M-50 -Number of teeth: 32 teeth / Belt width: 50 mm -Mount: Taper clamping bushing: optibelt 1615-30 Ø 32 x 38 mm -Quantity: 1x timing belt pulley included -Dimensions: Ø 87 x 60 mm -Weight: 1.3 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 350/340/H245 mm -Weight: 58.5 kg

Gear pump Manufacturer: Johnson Pump wings made of rubber Power: 1.1 kW good condition LWH: 800 x 370 x 360 mm

Excenter screw pump Manufacturer: Netzsch Type: NM031BH01L06H N°: 303316 Built: 1999 speed-controlled Mobile Gearbox: Stöber Power: 1.5 kW very good condition LWH: 1400 x 380 x 1120 mm

Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Centrifugal pump Manufacturer: CREPACO Type: R3R No.: 0-2182 speed-controlled Mobile with housing good condition Gearbox: Stöber LWH: 1050 x 500 x 480 mm

Centrifugal pump Manufacturer: Fristam Type: ET232 N°: 55059 Power: 11 kW Speed: 2910 rpm

Excenter screw pump Manufacturer: Netzsch Type: NM031BH02512H N°: 322571 Built: 2001 Power: 1.5 kW LWH: 1200 x 230 x 520 mm speed-controlled various spare parts

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Busch, rotary vane vacuum pump -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm -Vacuum: 20 mbar -Dimensions: 560/280/H400 mm -Weight: 36.4 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Excenter screw pump Manufacturer: Netzsch Type: NM0453H02812H N°: 319224 Built: 2000 Power: 3.0 kW very good condition speed-controlled various spare parts LWH: 1800 x 500 x 600 mm

Rotary piston pump Manufacturer: Ledele GmbH Type: KRL65PN Built: 1998 Engine power: 2.2 kW Gearbox: Stöber speed-controlled Mobile very good condition LWH: 1200 x 600 x 620 mm

Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Safety switches, rope pull switches, rope tensioners, tensioning devices, rope tensioner system components -Manufacturer: Allen Bradley, Guardmaster Lifeline Rope Tensioner Rope Pull Switch -Type: LRTS -Quantity: 1x cable tensioner available -Dimensions: 90/90/H45 mm -Weight: 0.3 kg

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,