pu used for sale

Hydraulic pump, oil pump, gear pump -Power: 0.25 kW 2820 rpm -Protection class: IP 55 -Dimensions: 370/190/H190 mm -Weight: 10 kg

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 8.7 l/min -Number: 1x available -Price: per piece -Dimensions: 180/100/H110 mm -Weight: 1.6 kg

Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Weight 14 kg Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ \" Connection for juice outlet 1¼ \" ; new machine - top condition

Semico screw pump + booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul for Bush months ago! Warranty: without Delivery time: In stock

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 4 020 / 8 160 l/h Engine power: Level 1 1.0 (1.36) kW (PS) Level 2 1.9 (2.6) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 57 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Double hydraulic pump, oil pump, gear pump -Engine power: 11 kW at 1440 rpm -Pump: Ostrta A 16 -Nominal pressure: 160 bar -Flow rate: 16 l/min -Protection class: IP 44 -Dimensions: 670/290/H335 mm -Weight: 99 kg

Air conditioner, air conditioning unit, condensate pump for air conditioner -Air conditioning - Manufacturer: Siccon - Type: Flowatch Design -Dimensions: 935/135/H75 mm -Weight: 1.3 kg

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 9 960 / 19 380 l/h Engine power: Level 1 2.5 (3.4) kW (PS) Level 2 4.2 (5.71) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 270 mm Width 500 mm Height 810 mm Weight 90 kg Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

CNC drawbar, tool holder, tool holder, milling tool holder - Quantity: 28 pieces -with: ring groove -for: SK50 recordings -Thread: M24 - Price: complete -Weight: 6.8 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: scrubbing machine make Gansow -Delivery rate: 11.3 l/min -Number: 5x available -Price: per piece -Dimensions: 220/210/H120 mm -Weight: 2 kg

Self-priming eccentric screw pump including 2/3 hose fitting with nut nut MG90/65 sleeve VA and 2/3 hose fitting with groove nut DN65/65 sleeve VA mounted on a chassis. Technical data: Rated power 840 - 8 100 l/h Engine power 2.2 (3.0) kW (HP) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Material 1.4301 / AISI 304 Connections: front MG90 AG top DN65 AG can be used for mash

Diaphragm pump, centrifugal pump, water pump, chemical pump -from: Scrubber-dryer, brand Gansow -Flow rate: 8.7 l/min -Quantity: 2 available -Price: per piece -Dimensions: 200/200/H95 mm -Weight: 2 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Electric motor: 80 V with 2 hydraulic pumps -Power: 2.2 kW -Speed: 1480 rpm -Dimensions: 340/290/H590 mm -Weight: 45 kg

Hydraulic pump, oil pump, gear pump, central lubrication, oil circulation system -Power: 0.07 kW 2700 rpm -Protection class: IP 44 -Pump output -Number: 1x pumps available -Price: per piece -Dimensions: 213/85/H112 mm -Weight: 3 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 2.2 kW -Flow rate: 100 m³/h -max. vacuum: mbar -Speed: 1400 rpm -Dimensions: 700/430/H620 mm -Weight: 85 kg

4 drum pumps; pneumatically operated; suitable for 200L faessers; with base and distribution line.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Grinding wheel pullers, cup wheel pullers, double bench grinder pullers, surface grinder pullers, cylindrical grinder pullers, dressing heads, dressing heads for grinding machines -Coverage: 255 mm -Quantity: 1x disc puller included Price: per piece -Dimensions: 510/165/H290 mm -Weight: 34 kg

Pulse generator, handwheel, CNC control -Manufacturer: Fujitsu Fanuc, Pulse Generator -Type: A860-0200-T021 -Quantity: 2x Pulse Generator available -Price per piece -Dimensions: 122/122/H136 mm /140/120/H120 mm -Weight: 1.1 kg/pc.

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K o. F/K Vacuum: 3 mbar - 0.5 mbar motor: 15KW Status: used, tested! The general recreation for the Geraet is offered separately! Inclusive: oil filling, vacuum intake filter delivery time: from stock!; ready for use

Oil injector similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: Whether 8000B Condition: used, expanded from a running system!

Dosing pump, 2-component dosing pump -For dosing liquid media -Dosing rate: 1.4 l/h -Pressure: 10 bar - Electrical connection: 100-240 V 50/60 Hz -Weight: 3.6 kg

electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

Rotary vane vacuum pump Manufacturer: Becker Type: U5.100 Suction power: 100 m3/h end pressure: 0.1 mbar (abs.) Inclusive: Gasbalast, oil filter Status: Performance Performance: 12 months delivery time: from stock; ready for use

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

Double hydraulic pump, oil pump, gear pump Manufacturer: ATOS -Rotor pump type: PFED-43056/022/1DTO -Shaft diameter: 22 mm -Number: 4 pumps available - Price: per piece -Dimensions: 175/325/H195 mm -Weight: 28 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54129/029/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

Rotary vane vacuum pump lubricated Manufacturer: Busch Type: R5 RA 0630 B Status: Maintained, very good condition, used Performance: 6 months suction valves: 630m3/h solvent: mineraloil

Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg

High-quality machine for cleaning and separation of finished products such as semolina and vapors of hard and soft wheat, or as a prerequisite for the production of non-slip flours. Bühler Type MQRE. Good condition and ready for use. During overhaul, the actuator is newly stored and all seals replaced. Filter cloths, brushes and both front derailleur to be replaced. Newly painted on request.

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

centrifugal pump, high-pressure pump, water pump, centrifugal submersible pump, submersible pump, waste water pump, -with central lubrication -Dimensions: 3275/350/H430 mm -Weight: 117kg

centrifugal pump, water pump, circulation pump -Flow rate: m³/h -max. H: mWs -Engine power: 1.85 kW -Speed: 1400 rpm -Pipe connection inlet: DN80 -Pipe connection outlet: DN80 -Dimensions: 525/270/H510 mm -Weight: 55 kg

Maximum punching format: 730 x 1040 mm Max pressure: 300 tons Thickness: 0.1-2 mm Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 7,500 sheets / hour Machine weight: 15,000 kg Dimensions: Width length 260 cm height 582 x 386,5 x Power: 16 kw

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0063F Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg

Centrifugal pump, water pump -Motor power: 1.5 kW -Speed: 2850 rpm -Conveying capacity: not visible -Pipe connection inlet: 90 mm -Pipe connection output: 79 mm -Dimensions: 360/240/H370 mm -Weight: 31 kg

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 0630 B Status: Waiting, very good condition, second-hand Warranty: 6 months suction capacity: 630 m ³/h Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: E2M28, E2M18 Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg

Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1502 AV Engine: DS 400V Suction capacity: 500 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation