pu foam used for sale

General Description Lot of cast industrial impellers (pump wheels) suitable for use as replacement components in industrial pumps or for refurbishment and machining applications. The lot consists of impellers in two main diameter ranges. Technical Details Machine type: Cast industrial impellers / pump wheels Largest diameter: Approx. 400 mm Smallest diameter: Approx. 250 mm Material: Cast metal Quantity: Approx. 22 pcs Condition Used industrial condition. The impellers are supplied as a mixed lot and show normal signs of previous industrial use. Individual dimensions, bore sizes and wear condition should be verified prior to use. Dimensions Diameter range: Approx. 250–400 mm Auction-ID: A7-50745-39

Biesse Rover A3.30 CNC woodworking machining centre with Becker vacuum pump CNC woodworking machining centre with adjustable workpiece support beams and vacuum pods. Includes control cabinet with monitor, keyboard and mouse, separate pedestal control panel, foot controls, floor safety mats, safety fencing and machine-connected extraction hoses shown in the photographs. Visible dust accumulation and signs of wear. Included vacuum pump: - Brand: Becker - Type: PICCHIO 2200 - Year: 2007 - Serial number: 2157149 - Speed: 1,420 / 1,720 rpm - Motor power required: 1.8 / 2.5 kW - Inlet capacity: 90 / 108 m³/h - Vacuum: 130 / 130 mbar - Made in Germany Auction-ID: A1-50699-7

CNC woodworking machining centre with six adjustable support beams and vacuum pods. Equipped with operator control cabinet, separate control pedestal, foot controls, extraction hoses, safety fencing and floor safety mats, as pictured. Electrical data shown on the control cabinet nameplate: 400 V AC, three-phase, 50 Hz, 29 A, 17.1 kW. Made in Italy. Becker vacuum pump details: - Type: VTLF 2.250/0-79 - Year: 2013 - Serial number: 2714056 - Frequency: 50 / 60 Hz - Power: 5.5 / 6.4 kW - Speed: 950 / 1150 rpm - Inlet capacity: 244 / 286 m³/h - Maximum vacuum: 200 / 200 mbar Auction-ID: A1-50699-9

Stock number: PC1387, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: 3 pcs legs, Impeller: Ø 95 mm, Motor: 1,1 kW - 220/380 Volt - 2850 rpm, Theoretical capacity: 30000 l/h, Stage: 1, Working pressure : Max 1,3 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 2, Other: 4-bladed impeller

Stock number: PC1390, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: 4 pcs legs, Motor: 3 kW - 380/420 Volt - 2900 rpm, Theoretical capacity: 36000 l/h, Stage: 1, Working pressure : Max 2,8 bar, Dimensions inlet: Ø 2½, Dimensions outlet: Ø 2, Other: 5-bladed pump wheel, D 150 mm

Stock number: PC1392, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Impeller: Ø 160 mm, Motor: 2.2 kW - 380 Volt - 3000 rpm, Theoretical capacity: Max 36,000 l/h, Stage: 1, Working pressure : Max 2.8 bar, Dimensions inlet: Ø 2, Dimensions outlet: Ø 1½

Stock number: PC9239, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: Foot-mounted, Impeller: D 125 mm, Motor: 2,2 kW - 230/400 Volt - 2910 rpm, Theoretical capacity: Max 29000 l/h, Stage: 1, Working pressure : Max 2,3 bar, Dimensions inlet: Ø 1½, Dimensions outlet: Ø 1½

Offer 26265 Technical data: - Flat steel shears cut up to 240 x 13 mm - Profile steel shears - Cuts L-steel at 90° to 100 x 10 mm - at 45° to 70 x 8 mm - Steel bar shears - Cuts round steel up to 35 mm - Square steel up to 32 mm - Notching device with square notching device - Hole punch - punching force 600 KN - projection 220 mm - Punches in steel up to 30 mm Ø in 15 mm - Punches in steel up to 24 mm Ø in 20 mm - various punches + dies - E. – Footswitch - Drive 400 V / 4 kW - Space requirement approx. W 540 x H 1800 x D 920 mm - Weight approx. 1200 kg

Pressing line consisting of: Mechanical press with 800 ton capacity, table size 2600 x 1600 mm, with ABB loading/unloading robot, TECNOFIRMA WH00 piece washing system of 2020 Auction-ID: A7-50851-1

Pressing line consisting of: Mechanical press with capacity 800 ton, table size 2600 x 1600 mm, TECNOFIRMA TH05 piece washing system of 2017 Auction-ID: A7-50851-3

Three-pump vacuum unit with control cabinet for food processing plants, This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/bora-2/, Type: Vacuum unit with three pumps and control cabinet, Pumps: 3 × Bora SAP 450, on a shared frame with common manifold, Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V, Controller: Moeller controller w ...

Stock number: PC1386, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Construction: On 3 pcs. legs, Motor: 4 kW - 220/380 Volt - 1430 rpm, Theoretical capacity: Max 28,000 l/h, Stage: 1, Working pressure : Max 3 bar, Dimensions inlet: Ø 3, Dimensions outlet: Ø 3, Other: Self priming

40m³/h, +/-800 mbar, 1.1kW, 450 rpm

60m³/h, +/-500 mbar, 2.2kW, 1420 rpm

40m³/h, +/-600 mbar, 1420 rpm

40m³/h, +/-600 mbar, 1,85kW, 1420/min

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46380-51

Multi-purpose fork 1700 mm - KRA 8085/8095/8085/8095T/8105/8115/KL36.8/KL38.8/KL37.8/KL43.8 Auction-ID: A1-50849-238

Multi-purpose fork 1700 mm - KRA 8085/8095/8085/8095T/8105/8115/KL36.8/KL38.8/KL37.8/KL43.8 Auction-ID: A1-50849-215

Material Pusher 2000 Manitou - Telehandler / Manitou Pick-up Auction-ID: A1-50849-206

Multi-Purpose Fork 1300 mm - KRA, 5035/5040/KL12.5/KL14.5 Auction-ID: A1-50849-220

INOXPA SE-200 – Hygienic Centrifugal Pump INOXPA SE-200 hygienic centrifugal pump, designed for the transfer of liquids in production environments requiring suitable hygienic conditions. This equipment can be used in the food, pharmaceutical and cosmetics sectors for various liquid transfer and pumping operations. Features: Brand: INOXPA Model: SE-200 Type: Hygienic Centrifugal Pump Application: Liquid transfer and pumping Use: agri-food, pharmaceutical and cosmetics Dimensions (L x W x H): 80 x 60 x 110 cm Weight: 83 kg Equipment sold as is. Auction-ID: A1-50714-4088

Material Pusher 2000 Manitou - Telehandler / Manitou Pick-up Auction-ID: A1-50849-205

Material Pusher 2000 Manitou - Telehandler / Manitou Pick-up Auction-ID: A1-50849-251

ELMO RIETSCHLE V-VTN41 – Dry Vane Vacuum Pump ELMO RIETSCHLE V-VTN41 dry vane vacuum pump, designed to generate a stable vacuum for various industrial applications, including production processes, suction or packaging. This model offers a nominal volume flow of 42 m³/h and a limit vacuum of 150 mbar. Its dry pallet design is suitable for professional and industrial use. Features: Brand: ELMO RIETSCHLE Model: V-VTN41 Type: Dry Vane Vacuum Pump Nominal volume flow: 42 m³/h Vacuum limit: 150 mbar Applications: industrial processes, suction and packaging Dimensions (L x W x H): 58 x 40 x 27 cm Weight: 47 kg Equipment sold as is. Auction-ID: A1-50714-4078

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46380-50

see photos for more details Auction-ID: A7-50868-48

Flow rate: 54–90 m³/h, delivery head: 20–44 m, power: 11 kW, speed: 2,900 rpm. Auction-ID: A7-50868-113

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46380-34

Axial piston pump, transport dimensions 800x600x680 mm Auction-ID: A1-50849-175

Stock number: PC9241, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Centrifugal pump, Motor: 1,5 kW - 400 Volt - 2900 rpm

Indoor unit: Remeha Mercuria Ace EA 6kW Outdoor unit: Mitsubishi ODU 6kW R32 Mercuria Ace: - 6kW - COP (+7°C /+35°C) 6kW: 5 - Hot water production up to 60 degrees Celsius - Operational with outdoor temperatures up to - 20 °C - 100% power with outdoor temperatures up to - 10 °C - Can be connected to all HR boilers - Control of multiple heating circuits possible - Cooling possibility - Build-in appendages: open distributor, 3 bar overflow valve, magnetic filter and drip tray. - Circulation pump - Outdoor sensor - Outdoor units pre-filled with refrigerant up to 10 meters of pipe length Condition: new Auction-ID: A1-46380-52

- Total installed power 26.20 KW. - Working width 300 mm. - MELER gluing equipment for PUR glue. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-11

- Capacity of each pump 180 m³/h. - 4 KW-1420 rpm engine. - IMPORTANT: - This machine can only be sold in the EU. Bidders from other countries are not eligible to participate in the auction of this item. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-20

- Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-9

2x SIPOCH HF Series 300 mL High-Pressure Metering Pump Systems Manufacturer/Brand: SIPOCH Series: HF Series Pump capacity: 300 mL Quantity: 2 units Control: Unitronics Vision120 Equipment type: High-Pressure / Precision Liquid Metering Pump Systems Location: 91701 Trnava Two stainless-steel high-pressure precision liquid pumping systems formerly used by GA Drilling. The units are identified as HP.Pump.3 and HP.Pump.5 and are equipped with Unitronics Vision120 programmable operator interfaces. Identification / markings: HF Series Pump 300 mL MEG VTX-P25SEY04 Unit labels: HP.Pump.3 and HP.Pump.5 Asset references: Z0000840 / 20IM0011 and Z0000531 / 16IM0031 Equipment: Unitronics Vision120 programmable operator interfaces Dual stainless-steel pump heads High-pressure stainless-steel tubing Valve and manifold assemblies Associated tubing and cabling Condit ...

Key data: 40 t

Machines from the die-cutting production sector for the processing of coil coil material up to 1mm material thickness for the production of strip goods such as contact plugs for the general electrical and automotive industry. For sale are various high-speed presses from Schaal from 12kN to 40kN. In addition, various material coil unwinders from Huras-Stanzautomation can be purchased. In addition, various automatic winding machines from TF-Wickeltechnik and Huras are for sale. In addition, various pereferie devices can be purchased.

Hydraulic motor Hydraulic Pump Manufacturer: LöSi Hydraulik GmbH Model: MT 160 CT also mounted: Angle encoder TWK Elektronik Type: UB SRD C Err The device is NEW and fully functional. see pictures for more details. Internal number: 603 070 257398522892

Center height 160 mm, center width 650 mm, MK 3 tailstock, connected load 3 kW, nominal current drive motor 7 A, incl. digital display, MULTIFIX \"A\" base holder, GARANT 160 three-jaw chuck, interchangeable jaws and interchangeable wheels Auction-ID: A1-50626-10

Calpeda 7.5 kW Stainless-Steel Vertical Multistage Industrial Pump Manufacturer: Calpeda Model: M132 V1-7.5T IE3 Equipment type: Vertical Multistage Centrifugal Pump Motor power: 7.5 kW Motor efficiency class: IE3 Location: 91701 Trnava Industrial vertical multistage centrifugal pump designed for water circulation, pressure boosting and process applications. Equipped with a stainless-steel multistage hydraulic section and high-efficiency Calpeda three-phase electric motor. Features / applications: Vertical multistage construction Stainless-steel hydraulic section 7.5 kW three-phase electric motor IE3 high-efficiency motor Industrial water circulation Pressure boosting Process water applications Condition: Used only a few times. Reported to have been working when last used. Current operational condition has not been independently verified. Sold as photographe ...

CAPACITY: Swing over bed: 630 mm Swing over saddle: 500 mm Recommended turning diameter: 255 mm Max. turning diameter: 420 mm Max. turning length: 1,030 mm Bar working diameter: 76 mm TRAVELS: X-axis travel: 242 mm Z-axis travel: 1,100 mm MAIN SPINDLE: Spindle speed: 3,500 rpm Spindle nose: ASA A2#8 Spindle bearing diameter: 130/120 mm Spindle through hole diameter: 86 mm Min. spindle indexing angle (C-axis): 0.001° TURRET: No. of tool stations: 12 OD tool size: 25 mm Boring bar diameter: 40 mm Indexing time: 0.15 sec Rotary tool spindle speed: 5,000 rpm TAIL STOCK: Quill diameter: 100 mm Quill bore taper: MT#5 Quill travel: 100 mm FEEDRATE: Rapid traverse (X/Z-axis): 20/24 m/min MOTORS: Main spindle motor: 18.5/22 kW Rotary tool spindle motor: 5.5 kW Feed motor (X/Z-axis): X: 3.0 / Z: 4.0 kW Coolant pump motor: 0.4 kW POWER SOURCE: Electric power supply: 40.6 kVA  ...

AI Overview, A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3], Core System Components & Description, Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters):, Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube., Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes., Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid ...

A decoiling, straightening and stamping line with roller feed, straightening machine, decoiler and hydraulic press is available, 1) Roller feed WV-U-80/DSM 300 P-N, working direction: left to right, max. strip width: 300mm, strip thickness: 0.1-5mm, max. strip cross-section: 1,000mm², roller diameter: 80mm, max. feed speed: 120m/min, max. roller contact force: 4.5kN, feed accuracy: ±0.05mm, adjustable pneumatic pressure: approx. 5bar, 2) Straightening machine RSTC W60/7/300, working direction: left to right, passage width: 320mm, max. strip width: 300mm, strip thickness: 0.4-5mm, max. strip cross-section: 1,050mm², straightening and correction roller diameter: 60mm, feed roller diameter: 80mm, strip speed: 0-30m/min, feed rollers: 4, straightening rollers: 7, correction roller: 1, drive power: 3kW, 3) Decoiler E 3000/300 OMB, working direction: left to right, max. load capacity: 30kN, ...

The machine is in good technical condition; it can be tested by prior arrangement.

Offer 26239 Technical data: - Pressure capacity 250 KN - Max. sheet thickness 10 mm - Max. punch size / punch diameter 105 mm - Stroke infinitely adjustable 0 - 40 mm - Projection 750 mm - Maximum stroke rate 150 H/min - Installation height 200 mm - Drive 400 V / 8.2 kvA - Space requirement approx. W 4200 x H 1700 x D 1700 mm - Weight approx. 3200 kg - with: - Anchor table Li + Re per X-axis 2000 mm - Y - axis 500 mm - Punch quick-change device - Foot button; Emergency stop button - Extensive accessories, various mounts - Stamps and dies

Quick-release clamping device, pneumatic clamping device, clamping device, air clamping pump, high-pressure air clamping pump, ultra-high-pressure air clamping pump, hydraulic pump -Manufacturer: Tentec, High-pressure air-operated hydraulic pump with transport trolley -Pump: HII Type 5L-SS-300 -Outlet pressure: max. 2275 bar / 33000 psi -Individual components: see photos -Dimensions: 890/490/H1220 mm -Weight: 66 kg

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

Alcatel Adixen Pascal 2010 vacuum pump; PASCAL 2010 model; 230 V; 50/60 Hz; Raised vacuum limit: 11.0 x 10-2 mbar. (0.19 mbar); External dimensions (D)x(H)x(W): 42 x 14 x 24 cm.; Weight: 24Kg; With non-slip mat; Unfiltered; Internal reference: FA-2132 Auction-ID: A1-50994-1122

Marine Centrifugal Water Pump Set Electrically driven centrifugal pump assembly mounted on a fabricated steel base, comprising a three-phase electric motor, flexible coupling, pump and local control box. Application: Marine water-pumping system Functions marked on control box: Fire pump, bilge pump and cold-water pump Drive: Three-phase electric motor Equipment: Flexible coupling, perforated coupling guard, centrifugal pump, flanged pipe connections and start/stop controls Condition: Used, parts/repair condition, untested Approximate dimensions: 1,400 × 650 × 700 mm Approximate weight: 180 kg The pump casing, flanges, coupling guard and pipework show severe corrosion, including substantial rust scale, section loss and visibly perforated pipe sections. The motor and control enclosure appear more complete but remain untested. Pressure integrity and serviceability o ...

GE Fanuc series O-T control, Including cabinet with dies and separate hydraulic unit Auction-ID: A1-50476-4