pu foam used for sale

Model: A60 (3x2x10) Flow rate: 40 m³/h Gauge head: 39.3 m Speed: 2900 rpm Power: 5.0 kW (hydraulic) Max pressure: 16 bar Temperature: 40°C Fluid Density: 0.74 Auction-ID: A1-45887-116

16006332 Note: Item is defective! Auction-ID: A7-46481-1024

Silage spreader Metal-Technik General data • Manufacturer: Metal-Technik • Model: Silage spreader • Available: immediately Technical data • Working width: approx. 2,585 mm • Length: approx. 1,050 mm • Height: approx. 1,505 mm • Weight: approx. 750 kg • Rotor diameter: 356 mm • Drive: hydraulic • Torque: approx. 2,245 Nm • Head angle: 14° Equipment & Features • Uniform distribution and leveling of silage • Robust rotor with distribution tines • Three-point mount Cat. II / III • Sturdy construction Application area • Silo distribution / silage clamp • Agricultural use Condition • Ready to use Contact Now Kristina Kreimer – Surplex / TBAuctions k.kreimer@tbauctions.com Phone: +49 151 55771219 Auction-ID: A7-46022-2030

Slurry separator FR-280 with submersible cutting pump – new machine General data • Model: FR-280 • Condition: unused • Available: immediately Technical data • Motor power: 5.5 kW • Pump power: 4 kW • Voltage: 380V / 50Hz / 3-phase • Processing: approx. 20–30 m³/h • Weight: approx. 650 kg • Dimensions: 2,420 x 830 x 1,320 mm • Screen size: 280 mm • Inlet: 76 mm • Outlet: 110 mm • Material: Carbon Steel + Stainless Steel (SS304) Equipment & Features • Incl. submersible cutting pump • Various screen baskets available • Robust construction • Easy maintenance Recommended Screen Sizes • Pig manure: 0.75 mm • Cow manure: 0.75 – 1 mm • Chicken manure: 0.5 – 0.75 mm Application area • Slurry separation • Agriculture / Biogas • Solid-liquid separation Condition • Ready to use Con ...

Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-726

Designation: Water Pump Condition: Not Specified Auction-ID: A1-45887-53

Liquid bin with filter grid Estimated weight: 30 kg Approximate dimensions: 800x600xh1000 mm Auction-ID: A7-46655-141

GAZ 63 all-wheel drive ambulance Year of construction 1950 (classic car) Former military vehicle / ambulance Elaborately overhauled (technically & visually) Engine runs flawlessly Only approx. 6,000 km since overhaul 3,480 cc displacement 51.5 kW (approx. 70 hp) Gasoline engine with LPG gas system (drive economically) All-wheel drive (4x4) – off-road capable No rust, extensive preservation Paintwork renewed Electrics completely rebuilt Hazard lights available Motorhome conversion (as good as new): Kitchenette with fridge & sink Gas heater for cold days Hot water boiler Loft bed with storage underneath Many storage compartments in the interior Windows with blinds Rear entrance stairs extendable Comfort & Technology: Separate battery chargers Starter & Supply Batteries Shore power connection outside Gas detector f ...

N°1 workbench with dimensions: 700 × 1370 × 830 mm N°1 desk with dimensions: 750 × 1500 × 800 mm N°1 workbench with dimensions: 750 × 2700 × 800 mm N°1 bench with dimensions: 700 × 1200 × 760 mm DESKS WITHOUT CONTENT Assortment of wrenches, hexagonal wrenches and other types. Multi-brand and predominantly BETA. BETA cassettes included (x2) Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Shelf with partial content. Span sizes: 1000 × 500 × 1900 mm for a total of 10 spans. The content of three spans is not included, as it is composed of spare parts for other machinery already offered for sale with the current auction. Therefore, the delivery of all items visible on the shelf, with the exception of the shelving, is not guaranteed. Inspection is recommended. Three AL-KO pumps, two of ...

Upgrading of the electrical system carried out in 2019. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-728

Power: 5.5 Kw Flow rate: 250 m³/h Pressure:- 800 mbar. Serial: 1127207 Estimated weight: 400 kg Approximate dimensions: 1200x800x1100 mm Auction-ID: A7-46655-53

\"The Elmo Rietschle V-VTN41 dry vane vacuum pump is an industrial equipment designed to generate a stable and reliable vacuum in various applications, such as industrial processes, suction or packaging. The V-VTN41 model from Elmo Rietschle offers a nominal volume flow of 42 m³/h and a limited vacuum of 150 mbar, ensuring consistent and efficient performance. Its design minimizes vibration, ensuring smooth and quiet operation. Compact and robust, this pump has dimensions of 58 cm in length, 40 cm in width and 27 cm in height, for a weight of 47 kg, making it easy to install and handle. Offered as is, the Elmo Rietschle V-VTN41 represents a reliable and high-performance solution for industrial applications requiring a controlled and stable vacuum.\" Auction-ID: A1-46647-328

Self-priming centrifugal pump with stainless steel housing., Additional title: self-priming centrifugal pump, Frequency: 1450 1/min, Power: 4,0 kW, Material: stainless steel, Features: stainless steel housing

Pump station. Pre-run pumps for filling line, Keg line and for filtration, Additional title: Centrifugal pump system with flow meters for feeding a filling plant, Euro-Hygia II Adapta-Super: Flow rate: 10 m3/h pump head - 55m, Euro-Hygia I Adapta-Super: Flow rate: 4 m3/h pump head - 45m, Operation / Control: Proleit V6, Material: Stainless steel, Base construction: Frame, Features: 3 Pumps; 3 flow meters; process measurement instruments

2 KSB centrifugal pumps with frequency control from the ice water circuit of a refrigeration system. Capacity: 2 x 15 m³/h at 2 bar, Additional title: centrifugal pumps, Delivery rate: 15 m³/h, Delivery pressure: 2 bar delivery head 20 m, Running direction: clockwise

Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you., Material: Pump housing and impeller in stainless steel, Position: free standing/mounted on base, Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter

Riggs 1000 Transfer pump 2012, stainless, filling range from 125ml to 1200ml, they pump directly from cooking kettles, tote bins, mixing vessels or IBC, provide damage free transfer of hot or cold liquid, semi liquid and suspended solid products

Used volumetric pump CSF MAE50-1 for wine production year 2019 The pump CSF MAE50-1 for wine production year 2019 efficiently transfers liquids in the wine industry CSF Inox Spa manufactured this model to maintain a constant and gentle flow thereby preserving the product s organoleptic properties during transfer. Technical features and performance The CSF MAE50-1 is a lobe volumetric pump, that efficiently pumps liquids of various viscosities including musts and finished wines Specifically it operates at a capacity of 1500 liters per hour which ensures high process efficiency Furthermore its 1 point 5 kW motor supports electrical supplies of 230 400 V with a frequency of 50 Hz making it compatible with modern bottling plants. As for its usage history this machine has 6000 operating hours which indicates moderate use and good preservation. Currently it remains in storage so it is ready fo ...

Machine type: Asphalt / bitumen sprayer on trailer Manufacturer: VR (plate marking) Serial number: V1324 Year of manufacture: 2010 Configuration: Trailer mounted, twin axle Engine: HATZ diesel engine Engine type: 1D41C Engine build date: 01/2016 Equipment: - Spray bar / distribution system - Bitumen tank with heating system - Control panel with hour counter (approx. 6591 h visible) - Tow hitch for transport - Electrical control box Remarks: - CE marked - Manufacturer plate present - Suitable for road construction / surface treatment works Auction-ID: A7-45990-14

Turning length: 1000mm; Factory number: 37895; Turning diameter over bed: 500mm; Turning diameter over support: 280mm; Tip height: 250mm; Spindle Passage: 71mm; Speed range: 18-1800/36 step rpm ; equipped with digital display, Make: Fagor ; various accessories, Top grains, Turning steels etc. Auction-ID: A7-46619-270

Technical data Machine Type: Automatic punching machine Manufacturer: Bruderer AG, Switzerland Model: BSTA 40 Year of Make: 1978 Compressive force: 40 t Stroke rate: 50–1200 strokes/min Stroke adjustment: 13–57 mm (stepped) Tool installation height: 452 mm Tool installation height adjustment range: 60 mm Outlet columns (longitudinal): 210 mm Outlet columns (transverse): 680 mm Clamping surface at the bottom: 680 x 550 mm Clamping surface at the top: 680 x 400 mm Bed opening: 640 x 220 mm Strip running height: 60–140 mm Configuration Feeder: BBV 200/120 Max. belt width: 200 mm Max. strap thickness: 6 mm Feed length: 0–120 mm Tool monitoring: SIEGFRIED Press-Processor SPP 450 Auction-ID: A1-46503-319

Unchecked from practice Closure Auction-ID: A7-46327-64

Technical details Type: Ram punch label die cutting machine Manufacturer: PMC Model: F Operation: Mechanical punching system Max pre-cut size: 184 × 184 mm Min pre-cut size: 32 × 32 mm Max die cut size: 178 × 178 mm Min die cut size: 25 × 25 mm Trim: 3 mm Stack height: Up to 102 mm Speed: Approx. 13 cycles/min Power: 3 hp (approx. 2.2 kVA) Electrical: 3-phase supply Equipment: Supplied with multiple cutting dies Application: Label die cutting and small-format punching operations Serial number: F187 Auction-ID: A7-46679-8

On transport trolleys Auction-ID: A1-46666-504

Technical specifications of the accessories Accessories: Press protection grille Manufacturer: LEINHAAS – NILSON, 646 Gelnhausen Type: Nilson Press Guard SDF Factory No.: 1120 Year of manufacture: 03/1979 Configuration Execution: Mechanical press protection grille Auction-ID: A1-46503-112

Punching and nibbling machine - Digital display for X and Y - Tool cabinet with tools Sheet width 750 mm Sheet length: 1250 mm Sheet thickness 4 mm Table area 1600 x 1050 mm Stroke rate 180 stroke/min max. punching diameter 105 mm Punching pressure 25 t Total power requirement 4.0 kW Machine weight approx. 1.8 t Dimensions L x W x H 1.9 x 1.9 x 1.7 m Auction-ID: A7-46642-66

Description Machine type: Trailer-mounted concrete pump Manufacturer / Brand: CIFA Model / Type: v Year of manufacture: 2003 Country of manufacture: Italy Serial number: 00278 Performance Max. theoretical output: 30 m³/h Max. oil pressure: 220 bar Max. CLS pressure: 70 bar Engine Engine manufacturer: Deutz Engine model: F4L 1011 F Engine power: 38 kW (50.9 HP) Engine speed: 2400 rpm Displacement: 2.732 l Engine serial number: 00798493 Weights Max. weight: 2,470 kg Configuration & Features - Trailer-mounted concrete pump - Integrated hopper with safety grid - Control panel with pressure gauges and switches - Stabilizing support legs - Towable chassis with road wheels Condition / Remarks Used concrete pump in working condition. Normal wear consistent with age and use. Auction-ID: A7-45990-24

Oil tank with centrifugal pump Grundfos CH4-40 A-W-A RUVV Auction-ID: A1-46666-404

Technical data Manufacturer: Schroeder & Bauer Type: HB5 Year of Make: 1982 Machine No.: 5211 Operating voltage: 380 V Frequency: 50 Hz Power: 1.5 kW Rated current: 3.6 A Configuration Type: Industrial press (electric drive) Auction-ID: A1-46503-131

Consisting of power pump 700 bar / including low double-acting cylinder with capacity 10 - 20 and 30 tons / unused and in original packaging Auction-ID: A1-46698-351

Liter per hour: 30000 pump type: Centrifugal pump electrical power supply kW: 15

General SKU255X227 MakeComi-Condor TypeH.T. 600 GMR No.0878 Year of construction1993 Mounted on framecheck Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Motor22 KW Inlet diameter75 mm Specified Features - Pusher centrifuge Basket centrifugecheck Capacity52 l Basket sizesDia. 600 mm Max. loading weight65 kg Motor22 kW, 380 v Max. basket speed2000 rpm Max. temperature100°C Pusher centrifuges Pusher centrifugecheck Basket diameter600 mm Max. loading weight65 kg Motor14 kW, 380 V, 150 rpm, (Ex) Max. basket speed2000 rpm Mechanical operated pushercheck Motor2,2 kW, 380 V., 950 rpm, (Ex) MaterialStainless steel 1.4404 (316L) Information LocationBarneveld With switchgearcheck(as is) Floorspace1,30x3,60 m Total height2,70 m Weight4000 kg Extra SpecificationsCake volume 52 dm3, slurry density 1,25 kg/dm3, filter surface 0,45 m2 Pusher ...

Technical data Machine Type: Automatic punching machine Manufacturer: Bruderer AG, Switzerland Model: BSTA 40 Year of Make: 1978 Compressive force: 40 t Stroke rate: 50–1200 strokes/min Stroke adjustment: 13–57 mm (stepped) Tool installation height: 452 mm Tool installation height adjustment range: 60 mm Outlet columns (longitudinal): 210 mm Outlet columns (transverse): 680 mm Clamping surface at the bottom: 680 x 550 mm Clamping surface at the top: 680 x 400 mm Bed opening: 640 x 220 mm Strip running height: 60–140 mm Configuration Feeder: BBV 200/120 Max. belt width: 200 mm Max. strap thickness: 6 mm Feed length: 0–120 mm Tool monitoring: SIEGFRIED Press-Processor SPP 450

Machine number: A0045A0007 Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Travel X-axis: 2015 mm Travel Y-axis: 1215 mm Max. material thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching force: 165 kN max. hold-down force: 10 kN Max. stroke sequences punching Hole spacing 1 mm: 600 rpm Signing: 1300 rpm Max. axis speed X-axis: 80 m/min Y-axis: 55 m/min simultaneous: 97 m/min max. acceleration X-axis: 10 m/qs Y-axis: 5 m/qs C-axis punching/thread forming: 175/min Number of positions in the linear magazine: 17 Number of tools/claws: 15/2 Number of tools when using multi-tool/claws: 15-150/2 Number of claws location/2: max. 2/3 Reject parts: max. part size via disc chute: standard 180 x 150 mm max. part size via disc chute with movable support table: 460 x 500 mm Accuracy position deviation: +- 0.1 mm Average position spreading width: +- 0.03 mm in ...

Peddinghaus Peddimax 602 profile processing machine, suitable for punching, cutting and processing various steel profiles and sheet material. This robust and industrially designed machine from the renowned brand Peddinghaus is designed for intensive use in metal workshops, construction workshops and production environments where power, precision and versatility are of great importance. The machine is equipped with multiple processing stations, allowing various operations to be carried out efficiently on one compact setup. Based on the visible configuration, this installation is equipped for the processing of corners, strips, profiles and holes, which makes it particularly interesting for general steel construction and workshop work. The machine is offered with roller conveyor/infeed table, foot pedal and a range of visible outriggers and accessories, further increasing practicality. Ac ...

service station for processing PUR glue Type: EDGETEQ XES 200 Manufacturer: Homag Year: 2021 2 vacuum containers for application units, Electronic temperature control Mobile station on wheels Only requires electricity and compressed air, Dimensions: 980 × 600 mm Weight: 230 kg Helps: extend the life of the adhesive prevent hardening speed up the restart of production after a night or weekend Preheating: Integrated heating enables a quick start of production after changing or storing the container. Cleaning: Automated process of emptying and cleaning application units. In good condition, fully functional Find more here - / Contact us at -

Transnorm Pneumatic Pusher 900-600-500 90° RA2092 Technical Specifications: External Dimensions of Mounting Frame: LxWxH=980x700x825 mm Maximum Product Width: 900 mm Maximum product height: 640 mm Maximum conveyor belt-frame width (NB): 600 mm Maximum conveyor belt-frame height (BH): 90 mm Support feet: available as an option Drive: Pneumatic cylinder Optionally available : Control system Prices net plus VAT from the central warehouse of Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik