pu foam used for sale

Fuel gauge, oil pump, oil dispensing system, oil station, fuel pump, tank data recording, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Volume flow: 1 to 10 l/min -Engine: Hanning 0.55 kW -Pressure vessel: volume 2.8 liters -Individual components: see photos -Number: 2x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/piece

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist -Manufacturer: Grab hoist, multi-purpose hoist type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / length 30 m -Number: 2x cable pull available -Price: per piece -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: McBull, multi-purpose cable pulley type CSZ16BODY with steel cable -Load capacity: 1600 kg -Steel cable: Ø 11 mm / length 20 m see photos -Cable pull: Dimensions 550/130/H310 mm -Number: 2x cable pull available -Price: per piece -Transport dimensions: 560/360/H180 mm -Total weight: 23.2 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device -Manufacturer: Yalel, multi-purpose cable pulley type Yaletrac 3.2 TON -Load capacity: 3200 kg -Steel cable: Ø 16 mm / not included, selection in stock at an additional cost -Number: 2x cable pull available -Price: per piece -Dimensions: 700/150/H370 mm -Weight: 22 kg/piece

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Ilmvac, Vacuum pump rotary vane pump -Type: 302313-02 P 12 D -Drive: ATB 0.55 kW / 1320 rpm -Suction capacity: 11.0 m³/h -Dimensions: 480/220/H265 mm -Weight: 28.4 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 315 mm -Type: 8M -Number of teeth: 124 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 315 x 45 mm -Weight: 16.3 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 72-8M-20 -Material: Steel -Number of teeth: 90 teeth / Belt width: 20 mm -Mount: Optibelt 2012-30 taper clamping bushing Ø 30 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 192 x 32 mm -Weight: 4.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 64-8M-50 -Material: Steel -Number of teeth: 64 teeth / Belt width: 50 mm -Mount: Optibelt 2517-40 taper clamping bushing Ø 40 x 44.5 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 168 x 60 mm -Weight: 6.8 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 48-8M-30 -Material: Steel -Number of teeth: 48 teeth / Belt width: 30 mm -Mount: Taper clamping bushing Tecnamic 2012-40 Ø 40 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 128 x 40 mm -Weight: 2.5 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 44-8M-30 -Material: Steel -Number of teeth: 44 teeth / Belt width: 30 mm -Mount: Optibelt 2012-30 taper clamping bushing Ø 30 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 120 x 38 mm -Weight: 2.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 40 8M 50 -Material: Steel -Number of teeth: 40 teeth / Belt width: 50 mm -Mount: Taper clamping bushing: optibelt 2012-32 Ø 32 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 106 x 60 mm -Weight: 1.9 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: 32-8M-30 -Material: Steel -Number of teeth: 44 teeth / Belt width: 30 mm -Mount: Taper clamping bushing optibelt 1615-30 Ø 30 x 38 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 38 mm -Weight: 1.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Thomas, Rotary vane vacuum pump -Type: VTE 10 27740125 -Drive: 0.35 kW / 2700 rpm -Vacuum: 150 mbar -Flow rate: 10 m³/h -Dimensions: 265/160/H155 mm -Weight: 10.2 kg

Centrifugal pump, water pump, stainless steel pump, food-grade pump, vertical centrifugal pump, multi-stage vertical centrifugal pump -Manufacturer: CNP, Multi-stage vertical centrifugal pump -Type: CDMF5-7FSWSC -Motor: 1.1 kW / 2870 rpm -Protection class: IP55 -Flow rate: max. 5 m³/h -Pipe connection inlet/outlet Ø32 mm -Dimensions: 250/240/H670 mm -Weight: 27.5 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 291 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, pressure/vacuum pump type VTLF 250 -Drive: AEG 5.5 kW / 950 rpm -Volume flow rate: 248 m³/h -Suction pressure: 200 mbar -Final compression pressure: mbar -Dimensions: 1200/620/H820 mm -Weight: 288 kg

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Division: 8 x punch pairs with a spacing of 60 mm (Ø 4 mm) -Distance between the two outer pairs of punches: 975 mm -Spacing: 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. passage width: 1000 mm -Drive: electric -Weight: 260 kg

Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Multi-purpose winch, cable winch, lifting winch, assembly winch, rope winch, universal rope winch -Condition: without steel cable -Manufacturer: Greifzug -2x multi-way trains -Cable winch with: 3200 kg load capacity -Robust aluminum case -with: telescopic hand lift poles -Pulling pulleys: 2 -Price: complete -Weight including accessories: 135 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l/min -Pressure output: 2.5 bar -Pumping height approx. 25 m -Speed: 2900 rpm -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Diaphragm pump, centrifugal pump, water pump, chemical pump -Flow rate: 12 l/min -Self-priming: up to 1.5 m (when dry) Liquid temperatures: 7 - 54 degrees -Pressure: 1 bar during continuous operation -Amperes: 2 A -Connection: 24 Volt DC Quantity: 1 piece available -Dimensions: 220/120/H160 mm -Weight: 2.7 kg

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

Manufacturer: Proteus, Type: 2 K und Wasserbasierende Mischanlage, Year: 2005, 2 K Mischanlage: yes, Steuerungsanlage für Mischverhältnisse: yes, Füllstandsüberwachung: yes, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Durchflussbereich l/min: 0,8-3,0, Kolbenpumpen gesamt: 4, Kolbenpumpen 1: 30-150, Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Kolbenpumpen 2: 3 Stück , Übersetzungsverhältnis 2: 30:1, Volumenstrom Doppelhub ccm 2: 150, Luftverbrauch bei 6 bar: yes, Schallpegeldruck db/A: 69, Laquer system - airless: yes, FREE TEXT: ohne Pistolen, Year :2005

FI-FI PUMP MOTOR 60HZ 690 VOLT SIZE 450 , MARINE CERTIFICATE

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: RARIPRESS, Hydraulic pump, hand pump, high-pressure pump -Type: RP 62C -Pressure range: max. 700 bar -Quantity: 1x hand pump available -Dimensions: 580/185/H180 mm -Weight: 14.7 kg

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101 Vibration frequency: 0 - 300 min⁻¹ Heat output: 1500 W Temperature range: Up to 100 °C W×D: 480×487 mm Included: Polyvap R-12 Rack (120ml) A condensing unit and flask A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic thermoforming press with integrated drawing pad function for forming processes, drawing work and precise sheet metal processing. Base price: 76000 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. T-slots and drilling patterns according to customer specifications Ad ...

Stock number: PT1570, In stock: Yes, Amount in stock: 1 pc., Item: Lobe pump, Construction: Stainless frame on wheels, Motor: Variable speed; 1,35 kW - 220/350 Volt, Horizontal throughput: Ø 1½

Pneumatic diaphragm pump with pressure multiplier. New equipment

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 28-8M-30 -Material: Steel -Number of teeth: 28 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 1210-32 Ø 32 x 25 mm -Quantity: 8x timing belt pulleys available - Price: per piece -Dimensions: Ø 75 x 38 mm -Weight: 0.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 56 8M 30 -Material: Steel -Number of teeth: 56 teeth / Belt width: 30 mm -Receiver: Taper clamping bushing: TECNAMIC 2012-40 Ø 40 x 35 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 150 x 38 mm -Weight: 3.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-40 Ø 40 x 45 mm -Quantity: 6x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.0 kg/pc.

Diameter van de frontplaat: 700 mm minimale/maximale buisdiameter: 300 gt; 600 mm spindelsnelheid: 50 Hz: 12/23/45/85 tpm 60 Hz: 15/28/53/102 tpm beweging van turret: 180 mm Spindel beweging: 120 mm vermogen: 3,7 kW lengte: 2215 mm breedte: 1700 mm hoogte: 1400 mm gewicht: 2800 kg

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Millipore Milliflex PLUS MXP PUMP 03 Model: MXP PLUS 03 With 3 microwire adapters 3 Filtration Pumps (Milliflex Plus) 3 x 24 W

Punching tools / press tool components from MISUMI – i.e. punches and dies / cutting bushes (button dies) for sheet metal working. On the parts you can see designations like SJAS..., EMSD... and on the note several times MISUMI. MISUMI leads SJAS

Dimensions (L/W/H): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 630-640 mm turning diameter over slide rest: ca 380 mm turning length: ca 2000-4000 mm total power requirement: 15 kW weight of the machine ca.: 7-8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 90 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.