pu foam used for sale

Our Pfeiffer Vacuum HiPace 2300 is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our Pfeiffer Vacuum HiPace 2300 wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 350/340/H245 mm -Weight: 58.5 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Hose pump for conveying corrosive, abrasive, highly viscous or highly dense liquids. Due to its simple design, the pump is self-priming, low-wear and dry-running. Manufacturer: Delasco Type: DSC65PA1S Y.O.M.: 10/2001 Q= 3.1 a / 14.95 m3/h P= 15 bar with geared motor SEW-Usocome 220/380 V; 11 kW; 1440/ 7.2/44.0 rpm Inlet opening approx. 55/100 mm Total approx. 1400 x 1300 H 1150 mm

Parker,Denison P7P Hydraulic Pump available for Sale. Make: Parker,Denison Model No.: P7P3R1A5A2BOOXM204381 Code No.: 023-04381-0 Serial No.: 002042465;002045084 Macgregor Article No.:1875241-801 U.S.A.

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump, rotary vane pump -Manufacturer: Busch, rotary vane vacuum pump -Type: RC 0025 E 501 -Drive: 0.75 kW / 1410 rpm -Vacuum: 20 mbar -Dimensions: 560/280/H400 mm -Weight: 36.4 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Excenter screw pump Manufacturer: Resch Type: 2RBL 150 Built: 1998 Speed: 309 rpm Power: 0.37 kW at 1360 rpm very good condition LWH: 850 x200 x 170 mm Product inlet DM 25 (milk tube fitting) Weight: approx. 15 kg 3 in stock

Excenter screw pump Manufacturer: Fryma Type: N20A Built: 1990 with Stöber gearbox speed-controlled Speed: 126/880 rpm very good condition LWH: 1250 x 300 x 300 mm

Centrifugal pump, acid pump, alkali pump, water pump for groundwater lowering pump -Centrigeminal pump: with stainless steel tank -Motor: 2.2 kW -Flow rate: 1900 l/min -Pumping height: 15 m -Tank capacity: approx. 500 liters -Overall dimensions: 1080/920/H1190 mm -Weight: 126 kg

Safety switches, rope pull switches, rope tensioners, tensioning devices, rope tensioner system components -Manufacturer: Allen Bradley, Guardmaster Lifeline Rope Tensioner Rope Pull Switch -Type: LRTS -Quantity: 1x cable tensioner available -Dimensions: 90/90/H45 mm -Weight: 0.3 kg

Koch Pumpentechnik (Porta Westphalica) Built: 2007 Type: FP2/40-125/302 Power: 20 m3/h at 18 m height (water) very good condition Engine power: 3 kW/3.45 kW Weight: 70 kg Diameter inlet: 65 mm Diameter outlet: 50 mm Milk pipe LWH: 500 x 230 x 360 mm

Excenter screw pump Manufacturer: Fryma Type: N20A Built: 1987 Speed: 700 rpm very good condition LWH: 1200 x 350 x 410 mm

Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm -Weight: 3.3 kg

V-belt pulley, pulley -V-belt pulley: 5-groove pulley type SPB 190x5 -V-belt width: 10 mm -Hole: Ø 38x50 mm -Quantity: 3x pulleys available -Price: per piece -Dimensions: Ø 136 x 64 mm -Weight: 4.6 kg/pc.

V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable pitch -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm -Weight: 5.1 kg

Excenter screw pump Manufacturer: Fryma Power: 0.55 kW Built: 1990 speed-controlled LWH: 1100 x 300 x 300 mm

Excenter screw pump Manufacturer: Fryma Type: NE20A Built: 1987 Power: 0.55 kW good condition LWH: 1100 x 300 x 270 mm

Centrifugal pump Manufacturer: Alfa-Laval (Sweden) Type: ME-155AE N°: 31452-695 Capacity: 30,000 l/h (water) at 28 m height very good condition LWH: 830 x 300 x 450 mm

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: Stroke 20 mm -Hole Ø 50 mm -Sheet width: up to 993 mm -Punch dimensions: 96 cutouts 22 x 3.5 mm -Individual components: see photos -Dimensions: 1400/820/H380 mm -Weight: 732 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, stroke 12 mm -Punch dimensions: 1x Ø7 mm / 1x radius 13 mm, see photos with dimensions -Dimensions: 535/350/H267 mm -Weight: 142 kg

Maso pump Manufacturer: maso Process-Pumpen Type: PLC-2.5" N°: 74741299 speed-controlled good condition LWH: 1350 x 360 x 520 mm

Special pump Manufacturer: MOSVEX Type: S6C AL N°: 446149 LWH: 1100 x 400 x 500 mm

Process pump Manufacturer: Maso Type: Plc-2" N°: 111050205 with CE mark very good condition Engine: SEW-EURODRIVE Power: 1.5 kW IP66 LWH: 950 x 220 x 340 mm

V-belt pulley, pulley -Large selection of V-belt pulleys -Offer available upon request

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

pneumatic piston pumps, airless high-pressure pumps, air motors -spare part -Weight: 100 kg

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm

Gear pump Manufacturer: Johnson Pump wings made of rubber Power: 1.1 kW good condition LWH: 800 x 370 x 360 mm

Excenter screw pump Manufacturer: Netzsch Type: NM031BH01L06H N°: 303316 Built: 1999 speed-controlled Mobile Gearbox: Stöber Power: 1.5 kW very good condition LWH: 1400 x 380 x 1120 mm

Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm

Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Quantity: 5x punches -Max. width: 1000 mm -Tool built-in: 8x45 mm -Distance between punches: 187 mm -powered: electric -Weight: 280 kg

Positive displacement pump, pressure pump, water pump -Drive: 2.5 kW -Speed: 1425 rpm -Pipe connections: DN 50 -Dimensions: 860/330/H410 mm -Weight: 90 kg

Centrifugal pump Manufacturer: CREPACO Type: R3R No.: 0-2182 speed-controlled Mobile with housing good condition Gearbox: Stöber LWH: 1050 x 500 x 480 mm

Centrifugal pump Manufacturer: Fristam Type: ET232 N°: 55059 Power: 11 kW Speed: 2910 rpm

Excenter screw pump Manufacturer: Netzsch Type: NM031BH02512H N°: 322571 Built: 2001 Power: 1.5 kW LWH: 1200 x 230 x 520 mm speed-controlled various spare parts

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 5.5 kW -Speed: 1400 rpm -Intake volume: 160 m³/h -Weight: 240 kg

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 500 kg -Lifting speeds: 1/3 m/min -Lifting height: 6 m -Double strand

Excenter screw pump Manufacturer: Netzsch Type: NM0453H02812H N°: 319224 Built: 2000 Power: 3.0 kW very good condition speed-controlled various spare parts LWH: 1800 x 500 x 600 mm

Rotary piston pump Manufacturer: Ledele GmbH Type: KRL65PN Built: 1998 Engine power: 2.2 kW Gearbox: Stöber speed-controlled Mobile very good condition LWH: 1200 x 600 x 620 mm

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 0.37 kW -Flow rate: 10m³/h -Max. pressure: 0.15 bar -Speed: 1370 rpm -Weight: 20 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Performance: 41.6 l/sec -Pump length: 1550 mm -Flange outer diameter: 250 mm -Flange inner diameter: 130 mm -Pump diameter: 175 mm -Weight: 235 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 960 mm -Flange outer diameter: 250 mm -Flange inner diameter: 125 mm -Pump diameter: 210 mm -Weight: 170 kg

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 18.5 kW -Capacity: 3000 l/min -Pump length: 970 mm -Flange outer diameter: 245 mm -Flange inner diameter: 125 mm -Pump diameter: 210 mm -Weight: 180 kg

Dynajet 500 me , NEW, Operating pressure: 500 bar, Number of foerders: 15 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Operating pressure: 150 bar, Number of foerders: 42 l/min, Drive: electric 15 kW, 400 volts, Engine hours: approx: 1, Trolly, incl. zubehoer,

Underwater electric pump, submersible pump, well pump, deep well pump -Drive: 8.2 kW -Output: 1800 l/min -Delivery head H: 25 m (2.5 bar) -Pump length: 1260 mm -Flange outer diameter: 220 mm -Flange inner diameter: 100 mm -Pump diameter: 170 mm -Weight: 150 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 2.2 kW -Flow rate: 60 m³/h -Max. pressure: 0.5 bar -Speed: 1420 rpm -Weight: 100 kg

Circulating pump measuring case -Handover in its current condition as inspected -various flanges and connections -Circulation pump measuring Wilo -Suitcase -Weight: 19 kg