pu foam used for sale

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 255 mm -Type: 56-14M-85 -56 teeth: belt width approx. 85 mm -Receptacle: Taper clamping bushing: optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 255 x 100 mm -Weight: 24.5 kg

Our Sogevac SV300 rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty Our Leybold Sogevac SV300 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 190 mm -Type: 40-14M-55 -Pitch: 14 mm / strap width approx. 55 mm -Receptacle: Taper clamping bushing: Tecnamic 2517-40 Ø 40 x 45 mm -Dimensions: Ø 190 x 70 mm -Weight: 8.7 kg

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 160 mm -Type: 34-14M-85 - Pitch: 14 mm / belt width approx. 85 mm -Receptacle: Taper clamping bushing optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 160 x 100 mm -Weight: 7.5 kg

our Ruvac WAU1001 roots vacuum pump is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty After refurbishing, our LEYBOLD RUVAC WAU1001 roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

V-belt pulley, pulley -V-belt pulley: pulley with 6 grooves -V-belt width: 17 mm -Holder: Ø38 x 80 mm -Dimension: Ø205 x 120 mm -Weight: 12.4 kg

Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters -Total dimensions: 420/360/H3500 mm -Weight: 13 kg

Hydraulic pump, oil pump, gear pump, hydraulic unit -Manufacturer: ORSTA, hydraulic pump with clutch bell -Pump Type: A25R -Clutch bell: IWK 8420523 -Shaft: Ø 22 x 25 mm Recess: Ø 250 mm -Hole circle: Ø 300 x 18 mm -Dimensions: 285/285/H245 mm -Weight: 7.1kg

Eccentric spiral pump NETZSCH NE80A 15-20 to/h used - in very good condition! UNI-ALTD Capacity: approx. 15-20 t/h Year: 1984 Type: NE80A Flange: 1 x DN 120 1 x DN 150 Comment: the pump is tested, 100% functions guarantee! Measurements: Length: 2030 mm Width: 600 mm Height: 1300 mm

Vacuum pump Manufacturer: Pfeiffer Type: DUO 2.5 (PK D41 602A) Built: 2003 Pw: 0.13 kW For further data see also type plate photo All information without guarantee

Diaphragm pump, centrifugal pump, water pump, chemical pump, compressed air-operated diaphragm pump -Manufacturer: Tapflo, air-operated diaphragm pump type TX70 ATS-ALP -Flow rate: approx. 78 l/min -Delivery pressure: max. 8 bar -Quantity: 1 piece available -Dimensions total: 210/170/H235 mm -Weight: 7 kg/piece

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

Rotary vane pressure/vacuum pump from Gardner Denver/Rietschle KTA 80/5 complete with 4.0 KW AC-motor, 50 m3/h, + 1.0 bar pressure, - 0.6 bar vacuum, Heidelberg version with Heidelberg plug, completely overhauled with all wearing parts, 1 year warranty

Centrifugal pump, water pump, domestic water pump, garden pump -Manufacturer: Neptun, garden pump type NGP 100i -Connection: 230 volts -Power: 1000 W -Flow rate: max. 4600 l/h -Delivery head: max 45 m -Dimensions: 415/220/H230mm -Weight: 9.1 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 36 mm -Type: unknown -Hole: Ø 10 mm -20 teeth: belt width 16 mm -Quantity: 57x timing belt pulley available -Price: per piece, minimum order 2 pieces. -Dimensions: Ø 36 x 20 mm -Weight: 0.1kg

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Becker, vacuum pump type VT 3.10 -Drive: 0.37 kW / 1420 rpm -Volume flow rate: 10 m³/h -Suction pressure: -850 mbar -Dimensions: 420/190/H285 mm -Weight: 15 kg

Vacuum pump, rotary vane pump -Manufacturer: Becker, vacuum pump type VT 3.40 -Drive: Dietz 1.25 kW / 1430 rpm -Volume flow rate: 40 m³/h -Suction pressure: -900 mbar -Dimensions: 420/190/H285 mm -Weight: 38 kg

Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg

Manufacturer: Grundfos Number: 1 Model: NB 100-200/181 A-F-A-GQQE Built: 2008 Rated flow current: 284.3 m3/h Nominal head: 33.4 m Speed: 2950 rpm Pressure: 16 bar Temperature range: 0-90 °C Power: 37 kW The pumps never went into operation after installation and therefore virtually unused. Technical specifications and data sheets are available and will be sent on request.

Alu window profiles Punching tool for end hole ventilation 4 stations

Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 17 mm -Mounting: Taper bushing Ø 40 x 30 mm (can be changed) -Dimensions: Ø 187 x 44 mm -Weight: 5.7 kg

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 22 mm -Hole: Ø 42 x 112 mm -Dimensions: Ø 180 x 130 mm -Weight: 8.3 kg

Centrifugal pump, water pump, block pump, spiral casing pump -Manufacturer: Ebara, centrifugal pump type 2CDX/A 70/12 -Flow rate: 20-80 l/min -Engine power: 0.9 kW -Speed: 2800 rpm -Pipe connection see photos -Dimensions: 385/210/H250 mm -Weight: 13.4 kg

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

dosing pump, piston pump, diaphragm pump -Manufacturer: Preci-Pompe, dosing pump with stainless steel container -Type: PP 31 -Motor: VEM 0.55 kW -Individual components: see photos -Dimensions: 680/440/H620 mm -Total weight: 87 kg

4-column punching tool, separating tool, punching tool, punch, punching die, punching stamp -Punching tool: 4 column punching tool long hole 10 x 7.5 mm -Punching dimensions: see photo with dimensions -Dimensions: 800/315/H320 mm -Weight: 120 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns, Ø 10/14/10 mm -Punching dimensions: see photo with dimensions -Dimensions: 265/105/H150 mm -Weight: 11.7 kg

2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg

Vacuum pump, rotary vane pump, rotary vane vacuum pump -Manufacturer: Werie Rietschle, rotary vane vacuum pump type CLE15 DV -Suction capacity: 15 m³/h -Drive: Bauknecht 0.75 kW / 1400 rpm -Overall dimensions: 550/300/H320 mm -Weight: 37 kg

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

M. No.: 458/08 (C.2.144.1301/02) Max. Format: B1 Voltage : 100-240V // 300-330VA // 50/60Hz

Servo Electric punching head Large format 3000 x 1500mm With Sheet Master & Duplex carts Year: 2015 Just under 19,000 hours! With tooling

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

Hüdig HC 170 water pump unit with air-cooled diesel engine 19.1 kw/26 hp on single-axle trailer for max. 6 km/h. Weight approx. 450 kg. Flow capacity max. 43.5 m3 / hour, pressure max. 14.5 bar, head max. 100 m. For clean or slightly polluted water without solid parts.

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 3-groove pulley type SPA 355x3 -V-belt width: 13 mm -Mounting: Taper bushing Ø 48 mm (can be changed) -Dimensions: Ø 360 x 50 mm -Weight: 14 kg

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 13 mm -Hole: cone Ø 101 - 107 mm -Dimensions: Ø 320 x 65 mm -Weight: 15.7 kg

Used vacuum pump, roller piston pump for the fine vacuum range, suction capacity: 250m3/h Roller piston pump for the fine vacuum range, suction capacity: 250m3/h; Final pressure: depending on the performance of the pre-vacuum pump

new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 8-groove pulley type SPB 224x8 TB 3535 -V-belt width: 17 mm -Mounting: Taper bushing Ø 60 x 90 mm (can be changed) -Dimensions: Ø 230 x 160 mm -Weight: 25 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

NEW! industrial shredder for pulled meat suitable for beef, pork, lamb, chicken,… content hopper : ± 35L electrical power : 1,47 kW capacity : ± 300-500 kg / h (depending on the degree of the cooking) possibility to place a 200 L eurobin at the bottom of the machine, so the product falls in it.

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Alfa Laval, air-operated double diaphragm pump -Type: DL25-AA-EET-Q -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 240/230/H300 mm -Weight: 8.7 kg