pu 73 kr used for sale

Injection pump from a Liebherr excavator Operating hours approx. 2,000 hrs pump was upgraded to electric Storage device is replaced. Pump is fully functional Special price

Pneumatically driven punching, Horizontally arranged. Pedicure Manufacturer: Meuleman Engineering BV Vosseboerweg 7 7683 SH Den Ham (Ov) Punching force 200kg Special price

Punch, pneumatic punch, punching machine, punching device, hole punching machine, pneumatic hand punch -Manufacturer: DE-STA-CO, pneumatic punch -Type: 040 0210 -built-in stamp: Ø 2.5 mm -Max. Projection: 25 mm -Dimensions: 190/200/H510 mm -Weight: 24kg

Edwards Pump Station consisting: Rotary Vane Vacuum Pump: Edwards E1M175 Booster Vacuum Pump Roots Pump: Edwards EH1200 Condition: used General recovery of the geraete is possible with a capacity of 12 months. delivery time: from stock; ready for use

Umwaelz pump heating pump pump new and unused, ovp 1 pcs Grundfos UPC 50-120 3-400Volt 50Hz Special price Special price

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1045 mm -Width: 14 mm/height: 39 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.6 kg/piece

Rotary vane vacuum pump Manufacturer: Leybold Type: SV 630 B and BF Kat. No.: 960863 & 960867 Voltage: 50/60Hz 400V End pressure: 0.8 hpa(mbar) Status: Generalueberholt Gewaehrleistung: 12 months Including: engine restocking, repainting, electric check delivery time: from stock; ready for use

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Injection pump PS6HR50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Injection pump PS6HL50 As good as new. Spare parts from bench tested Mitsubishi new engines ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

Coolant pump ET No.: 37545-80011 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump steering pump -Type: 0 510 415 314 -Number: 2x pumps available -Price: per piece -Dimensions: 150/100/H90 mm -Weight: 2.2 kg

Attachment: eccentric screw pump Manufacturer: Netzsch Type: NE 69 A Machine number: 253233 Year of construction: 1994 Capacity: 25m 3/h Engine: Dietz KW: 5.5 Voltage: 400V Connection suction side: DN 100 Port side: DN 100 Length: 2300 mm

Machine: eccentric screw pump Manufacturer: Netzsch Type: 3 NE 08 Machine number: 253173 Year of construction: 1994 Capacity: approx. 300 l / h Engine: Dietz Drezhal: 1390 RPM KW: 0.55 Voltage: 400V Connection suction side: 3/4 inch Connection pressure side: 3/4 inch Length: 800 mm

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

Manufacturer: Busch Type: Mink MI 1502 BV Engine: 9.2 KW ; DS 400V Status: Used, Partial overtaking Performance: 6 months Suction power: 500 m3/h final pressure: approx. 250 mbar (abs.) Geraeusch Level: 85 dBa Zubehoer: additional suction filter (changed) ; Operating manual Delivery time: approx. 1-2 Where.; ready for use

Vacuum pump, rotary vane pump -Drive: 1.25 kW -Flow rate: 40 m³/h -Vacuum: 150 mbar -Dimensions: 530/320/H250 mm -Weight: 38 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1127 mm -Width: 14 mm/height: 58 mm -Price: per pair (left right) -Weight: 2.9 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1140 mm -Width: 14 mm/height: 59 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.45 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1131 mm -Width: 13 mm/height: 56 mm -Price: per pair (left right) -Weight: 2.9 kg

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg

Rotary vane vacuum pump- packaging- Manufacturer: Busch Type: 220-80 Vacuum: 0.5 mbar Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used ; ready for use

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 785 mm -Width: 15 mm/height: 42 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 2.2 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB Type KMER 132 AC P 7.5 kW 1435 rpm -Flow rate: l/min -Operating pressure: bar -Dimensions: 720/340/H335 mm -Weight: 87 kg

Hydraulic pump, oil pump, gear pump -Max.: 600 rpm -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg

Rotary vane vane vacuum pump- packaging Manufacturer: Busch Type: CB0251B Vacuum: 0.5 mbar Status: used, tested! Maintenance for the geraet is offered separately! Inclusive: Oil filling delivery time: from stock!; ready for use

Timing belt pulley, slewing ring, -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Mounting: Bolt circle Ø 490 mm Ø 18 / M16 -Dimensions: see photos -Overall dimensions: Ø 520 x 200 mm -Weight: 79 kg

Claw vacuum pump dry Manufacturer: Busch Type: Mink MM 1322 AV Motor: DS 400V Suction power: 300 m3/h End pressure: approx. 150 mbar (abs.) Performance: 12 months Condition: New ashoer: suction filter; Operating instructions Delivery time: short-term; ready for use

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 820 mm -Width: 15 mm/height: 58 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 1.8 kg

Claw vacuum pump dry manufacturer: Busch Type: Mink MM 1252 AV Motor: DS 400V Suction power: 250/300 m3/h final pressure: approx. 100 mbar (abs.) Zubehoer: suction filter; Operating instructions Delivery time: short-term; ready for use

Storage tanks, 10,000 litres According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. incl. mounting a console at above tank, incl. suction pipe 1 1/4 "as well as corner check valve with adjustable lift protection 1.5 3.0 m The container is externally repainted in RAL7042, traffic grey. (On request, we paint the tank in your House Paint / RAL tone) L = approx. 5.30 m + ...

Pump: centrifugal pump Manufacturer: Varisco Type: J40/J1-110 Year of construction: 2002 Capacity: 10 m3 / 13m / - 20 m3 Engine: Siemens KW: 1.1 Voltage: 380 V Speed: 2850 RPM Connection inlet DN 40 Port side: DN 40 Machine number: 107921 Dimensions: length 700 mm Product-contacting parts: stainless steel

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump -Hand hydraulic pump: with cylinder, unfortunately no type designation -Stroke: 45 mm -Piston rod: Ø 32 mm -Dimensions: see drawing in the photos -Dimensions: 645/230/H480 mm -Weight: 50 kg

Solenoid valve, directional valve, valve terminal, pump preload valve -Manufacturer: Rexroth, pump preload valve for the SYDFE control system -Type: SYDZ 001-13/300V028M -Dimensions: Ø 75 x 120 mm -Weight: 2.9 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 935 mm -Width: 13 mm -Height: 27 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 1.25 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 940 mm -Width: 13 mm -Height: 54 mm -Price: per pair (left right) -Number: 4x pairs available -Weight: 1.95 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 15 mm -Height: 57 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 2.7 kg

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 68 mm -large recess: Ø 70 mm -Dimensions: Ø 125/H49 mm -Weight: 0.4 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -approx. 20 m rope for: multi-purpose hoist on hand reel -Rope diameter: 15 mm -Dimensions: 430/300/H470 mm -Weight: 29 kg

fuel pump, supercharger carburettor -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

System: diaphragm pump Type: LEWA G3H M511S Gr. 30 Description: with diaphragm pump head, material stainless steel Year of construction: 2002 / refurbished 2008 Stroke length: 30 mm Hubfreqquenz: 175 min1 Rod power: 16000 (N) Measuring current at pmax: 170 (ges. 510) l/h Max.Zul. working pressure: 250 bar at least. suction flange pressure: 1.0 bar Connections: Suction and pressure side DN 15 Pump body: Stainless steel 1.4571 Diaphragm: PTFE Guide / ball: 1.4581 / 1.4301 Speed: 1440 RPM Power: 7,5 kw Voltage: 230/400 Technical documents: Yes

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg

Electric pumping system for oil or diesel for controlled extraction of oil quantities from large containers such as oil barrels, tanks, etc. Consisting of electric motor with pump, pressure monitor, hose reel, pump gun with manual pass counter with rigid outlet. Display of the extracted quantity in litres Electric pump for fresh oil supply, suitable for barrel removal or as a tank pump, Closed hose reel for oil, hose length xxm xx" hose, with wall mount and pump gun. Special price

Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley -Toothed disk: from a Kern CD 480 lathe -Type: P60-5M -Mount: hollow shaft Ø 25 mm -Dimensions: Ø 103 x 77 mm -Weight: 2.9 kg