pu 73 kr used for sale

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Rotary vane vacuum pump Manufacturer: Becker Type: U5.100 Suction power: 100 m3/h end pressure: 0.1 mbar (abs.) Inclusive: Gasbalast, oil filter Status: Performance Performance: 12 months delivery time: from stock; ready for use

Dosing pumps Elados EMP 12500P06 (2 stub) Elados EMP 13300P035 (1 piece) Elados EMP 14000P035 (1 piece)

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: Bosch, hydraulic pump steering pump -Type: 0 510 415 314 -Number: 2x pumps available -Price: per piece -Dimensions: 150/100/H90 mm -Weight: 2.2 kg

Printing capacity max. 300 t, table 1500 x 1000 mm, stroke max. 500 mm

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

High-quality machine for cleaning and separation of finished products such as semolina and vapors of hard and soft wheat, or as a prerequisite for the production of non-slip flours. Bühler Type MQRE. Good condition and ready for use. During overhaul, the actuator is newly stored and all seals replaced. Filter cloths, brushes and both front derailleur to be replaced. Newly painted on request.

Vacuum pump, rotary vane pump -Drive: 1.25 kW -Flow rate: 40 m³/h -Vacuum: 150 mbar -Dimensions: 530/320/H250 mm -Weight: 38 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1127 mm -Width: 14 mm/height: 58 mm -Price: per pair (left right) -Weight: 2.9 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 550 mm -Length extended: 1140 mm -Width: 14 mm/height: 59 mm -Price: per pair (left right) -Number: 3x pairs available -Weight: 2.45 kg

Maximum punching format: 730 x 1040 mm Max pressure: 300 tons Thickness: 0.1-2 mm Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 7,500 sheets / hour Machine weight: 15,000 kg Dimensions: Width length 260 cm height 582 x 386,5 x Power: 16 kw

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1131 mm -Width: 13 mm/height: 56 mm -Price: per pair (left right) -Weight: 2.9 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 785 mm -Width: 15 mm/height: 42 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 2.2 kg

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used; ready for operation

Semico screw pump +booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul at Busch 6 months ago! Performance: without delivery time: ex stock

Semico screw pump + booster Manufacturer: Busch Type: Cobra DS1000E Status: good condition, last factory overhaul for Bush months ago! Warranty: without Delivery time: In stock

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit -Manufacturer: VEM, hydraulic unit from Dorstener APE80-3050 press brake -Drive: VEB Type KMER 132 AC P 7.5 kW 1435 rpm -Flow rate: l/min -Operating pressure: bar -Dimensions: 720/340/H335 mm -Weight: 87 kg

Oil injector similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: Whether 8000B Condition: used, expanded from a running system!

Hydraulic pump, oil pump, gear pump -Max.: 600 rpm -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg

Timing belt pulley, slewing ring, -Slewing ring: with toothed belt pulley -Slewing ring: Ø 520 mm -Pulley: Ø approx. 370 mm -Belt width: 80 mm -Mounting: Bolt circle Ø 490 mm Ø 18 / M16 -Dimensions: see photos -Overall dimensions: Ø 520 x 200 mm -Weight: 79 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 400 mm -Length extended: 820 mm -Width: 15 mm/height: 58 mm -Price: per pair (left right) -Number: 1x pair available -Weight: 1.8 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump -Hand hydraulic pump: with cylinder, unfortunately no type designation -Stroke: 45 mm -Piston rod: Ø 32 mm -Dimensions: see drawing in the photos -Dimensions: 645/230/H480 mm -Weight: 50 kg

Rotary vane vacuum pump lubricated Manufacturer: Busch Type: R5 RA 0630 B Status: Maintained, very good condition, used Performance: 6 months suction valves: 630m3/h solvent: mineraloil

Solenoid valve, directional valve, valve terminal, pump preload valve -Manufacturer: Rexroth, pump preload valve for the SYDFE control system -Type: SYDZ 001-13/300V028M -Dimensions: Ø 75 x 120 mm -Weight: 2.9 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 500 mm -Length extended: 935 mm -Width: 13 mm -Height: 27 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 1.25 kg

Rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 0630 B Status: Waiting, very good condition, second-hand Warranty: 6 months suction capacity: 630 m ³/h Beriebsmittel: Mineral oil Accessories: inlet filter Delivery time: In stock; ready for operation

Pull-out device Brand: Sandie

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0063F Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Edwards Type: E2M28, E2M18 Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: DVT 3.60 & DVT 3.80 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation

Centrifugal pump, water pump, immersion pump -Manufacturer: Schmalenberger, immersion pump type ZB 40-18 -Feeding capacity: 27 m³/h -max. H: 5 m -Motor power: 1.45 KW -Speed: 2870 rpm -Pipe connection: see pictures -Dimensions: 300/300/H705 mm -Weight: 34 kg

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 450 mm -Length extended: 940 mm -Width: 13 mm -Height: 54 mm -Price: per pair (left right) -Number: 4x pairs available -Weight: 1.95 kg

Pump station VR 0632 B includes: 2 piece rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 302 D Beriebsmittel: Mineral oil Delivery time: In stock; ready for operation

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 15 mm -Height: 57 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 2.7 kg

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0100F Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

Motor centering flange, motor flange, pump flange, motor centering bell, coupling bell, pump support for large pumps, hydraulic pump, oil pump, gear pump -small recess: Ø 68 mm -large recess: Ø 70 mm -Dimensions: Ø 125/H49 mm -Weight: 0.4 kg

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg

Claw vacuum pump Compressing dry Manufacturer: Busch Type: Mink MM 1502 AV Engine: DS 400V Suction capacity: 500 m ³/h Discharge pressure: approx. 200 mbar (abs.) Accessories: inlet filter; Operating instructions Delivery time: Please enquire; ready for operation

Rotary vane vacuum compressor - dry running Manufacturer: Becker Type: KVT 3.100 Engine: 400V status: rebuilt and new painted Warranty: 12 months; ready for operation

Cable pull, wire rope, steel cable, multi-purpose pull, gripping pull -approx. 20 m rope for: multi-purpose hoist on hand reel -Rope diameter: 15 mm -Dimensions: 430/300/H470 mm -Weight: 29 kg

Drehschieber-vacuum pump Manufacturer: Leybold Type: Sogevacs SV280 Status: used, tested! The maintenance for the unit is sold separately! Including: oil filling Delivery time: In stock!; ready for operation

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0016C. Including: oil filling Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

fuel pump, supercharger carburettor -Kyosan Denki: Type 10-2 -Price per piece -Quantity: 2 pieces -Dimensions: 200/100/H170 mm -Weight: 0.7kg/pcs

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg

Rotary vane vacuum pump manufacturer: Busch Type: R5 RA 305 D Voltage: 50/60 Hz 400V Nominal: 300m ³/h Discharge pressure: 0,5hpa(mbar) Status: Rebuilt Gewaehrleistung-12 months Includes: motor new storage, painting, electrical check Delivery time: In stock; ready for operation

Flat belt pulley, toothed pulley, multi-belt pulley, Toothed Pulley -Toothed disk: from a Kern CD 480 lathe -Type: P60-5M -Mount: hollow shaft Ø 25 mm -Dimensions: Ø 103 x 77 mm -Weight: 2.9 kg

2 pillars punching tool, separating tool, punching tool, punch, punching die, punching punch -Punching tool: 2 pillars -Punch: 5 pieces 20 x 2 mm, distance 20 mm -Price: per piece -Number: 3 pieces available -Dimensions: 280/140/H160 mm -Weight: 18 kg