pt 21 used for sale

DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer of transmission: Atlanta, type 58 44 215 i 14.5 -Power: 2.45 kW / n1 1500 rpm -Motor manufacturer: Siemens, type 1 FT5072-OAFO1-2 / Brake 1 FU1050-6GF -Motor: 150 V / 10.0 Nm //3000 rpm -Hollow shaft: Ø 38 x 125 mm -Shaft: Ø 16 x 40 mm -Dimensions: 540/275/H230 mm -Weight: 29 kg

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, flame cutting system, flame cutting machine, longitudinal carriage, chassis, welding carriage, longitudinal carriage, welding robot, welding carriage, MIG/MAG welding machine, longitudinal seam welding system, longitudinal seam welding machine, longitudinal seam welding unit, rail runner, welding tractor -Oxyfuel cutting system: Oxyfuel cutting machine -Feed rate: adjustable -Dimensions: 460/210/230 mm -Weight: 7.6 kg

High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer, pressure monitor, pressure switch, mains transformer -Manufacturer: Siemens, power transformer for LMV5 system -Type: AGG5.210 -Voltage prim: 120 V -Number: 2x transformers available -Price: per piece -Dimension: 120/85/H80 mm -Weight: 0.3 kg/piece

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 13000; Engine: DC16 320A 02/63; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 2500

-Noise rating: 55 dB at 7m; Gross weight [kg]: 5000; Engine: DC09 72A/02-11; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 1200

-Noise Rating: 55 dB at 7m; Gross weight [kg]: 5500; Engine: DC09 072A/02-13; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, , - Stage V version available: DPX--21008, + €34.500; Water Tank Volume [l]: 1200

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 2 pieces, for machine tools and systems -Construction height: 50 mm -mount: M22 -Price: complete -Dimensions: Ø 219 x 50 mm -Weight: 6.3 kg/piece

Dowel - Anchor, cavity anchor -Anchor: Ø 4 mm -Anchor length: 210 mm -incl. dowel: Ø 8 mm -Quantity per package: 250 pieces -Building authority-approved air gap anchors according to DIN: 1053 -(Material No. 1.4571/1.4401 ) -Dowel: (Ultramid B3S ) -Number of packages: 60 -Price: per package -Weight 6.5 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder -Hydraulic cylinder: tie rod cylinder, steering cylinder, stroke 210 mm -Piston rod: approx. Ø 56 mm -Cylinder: outside Ø 105 mm -Socket: Ø 20 mm -Dimensions: Ø 125 x 840 mm -Weight: 31 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Handover: in its current condition as inspected -Housing: Damaged, see photos -Hydraulic cylinder stroke 210 mm -Piston rod: Ø 40 mm -Hole: Ø30 x 60 mm -Cylinder: outer Ø 90 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 1035/200/H100 mm -Weight: 18 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Rexroth, pneumatic cylinder type 522 215 043 0 -Stroke: 25 mm -Piston: Ø 100 mm -Piston rod: Ø 30 mm -Number: 3x cylinders available -Price per piece -Dimension: 430/113 / H113 mm -Total weight: 11.8 kg / piece

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 5500; Engine: DC 09 320 02/61; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 1200

-Noise Rating: 55 dB at 7m; Gross weight [kg]: 2420; Engine: NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, -Deutz TCD4.1 - Genset 110 kVA St5 SuperSilent- DPX-21004 + €23.500, -; Water Tank Volume [l]: 360

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3500; Engine: N67TM7; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Stage V version available: Deutz TCD7.8 - Genset 220 kVA St5 SuperSilent- DPX-21006 + €44.000, -; Water Tank Volume [l]: 500

- Super Silent 55 dBA @ 7 metres, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 3400; Engine: TCD 5.2 L4; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 500

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 80 mm -Stroke: 195 mm -Total length retracted, center to center of hole: 425 mm -Piston rod mounting: Ø 30 mm -Cylinder mounting: Ø 30 mm -Universally applicable: -Quantity: 1 piece available -Dimensions: 495/125/H100 mm -Weight: 20 kg

Roller conveyor, conveyor belt, roller track, accumulation roller conveyor -Roller width: 440 mm -Conveyor length: 2100 mm -Roller diameter: 50 mm -Axle spacing: mm -Height: 200 mm -Roller conveyor: driven -Geared motor: 24 volts -Speed: 20 m/min -Quantity: 1x roller conveyor available -compatible with: ID19856 -Dimensions: 2100/510/H200 mm -Weight: 72 kg

Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Manufacturer: SKF -Type: Bearing block SNL 213 -Bearings to be installed: Abbreviation -Quantity: 12x pillow block housings available -Price: per piece -Dimensions: 275/110/H150 mm/piece -Weight: 6.2 kg/piece

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -for: machine tools and equipment -Installation height: 71 mm -Burden -Quantity: 2 pieces -Price/Sale: complete -Dimensions per piece: 130/130/H71 mm Total weight: 3.6 kg

- Super Silent 55 dBA @ 7 meter; Gross weight [kg]: 1550; Engine: Deutz F4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 175

- 55 dB at 7 m; Gross weight [kg]: 1600; Engine: BF4M 2011; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy; Water Tank Volume [l]: 175

This 3-axis COMEVA MEX V 2100x3260 was manufactured in 2018. It features a working area of 2150 x 3250 mm and is driven by Yaskawa servos. The machine is equipped with a 9 kW ISO30 routing spindle, a 7-position automatic tool changer, and an HSD C-axis for aggregate machining. If you are looking to get high-quality CNC wood machining capabilities, consider the COMEVA MEX V 2100x3260 machine we have for sale. Contact us for further details.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 218 mm -Transport roller width: 790 mm -Holder with needle bearing plate: 140 x 140 x 19 mm -Flange mounting inside: Ø 110 mm, bolt circle Ø 140 mm -Number: 4x rolls available -Price: per piece -Weight: 40 kg/piece

Variator pulley, variable speed pulley, variable belt pulley, PIV transmission, variable speed transmission, variable speed pulley, variable pulley, expansion pulley, adjustable V-belt pulley -Manufacturer: Berges, Variator pulley -Outer diameter of pulley: 217 mm -Inner diameter of the mounting hole: 28/30 mm -Dimensions: Ø217 x 215 mm -Quantity: 5x pulleys available -Price: per piece -Weight: 8.5 kg/pc.

Variator pulley, variable speed pulley, variable belt pulley, PIV transmission, variable speed transmission, variable speed pulley, variable pulley, expansion pulley, adjustable V-belt pulley -Manufacturer: Berges, Variator pulley with thrust bearing -Outer diameter of pulley: 219 mm -Inner diameter of the opening: 28 mm -Dimensions: Ø219 x 170 mm -Weight: 6 kg

Variator pulley, Vario adjusting pulley, Vario pulley, PIV gear, Vario gear, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley with thrust bearing -Diameter pulley outside: 219 mm -Diameter mounting inside: 28 mm -Quantity: 2x pulley available -Price per piece -Dimensions: Ø219 x 140 mm -Weight: 5,5 kg/pc.

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: HTT, heating element type 2132G311 -Power: about 12 kW 400 V -Bolt circle: Ø 145 x 18 mm -Immersion depth: 800 mm -Total dimensions: 940/185/185 mm -Weight: 13 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic modules, PLC module, expansion module -Manufacturer: Fanuc, Electronic module expansion module from CNC machining center Santenberg GTC S 2 -Type: 21I EMIOB00021I -Expansion module: Type: A03B-0815-C001 4 pcs. -Dimensions: 545/220/H140 mm -Weight: 3 kg

Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve, hydraulic distributor block, hydraulic distributor, block distributor -Hydraulic distributors: Hydraulic distributor block from CNC machining center Santenberg GTC S 2 -Individual components: see photos -Submission/Price: complete -Dimensions: 300/210/H190 mm Total weight: 8.4 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 211 mm -Transport width: 745 mm -Shaft: Mounting Ø30 x 125/115 mm -Quantity: 1x transport roller available -Total dimensions: Ø 211 x 985 mm -Weight: 47 kg/piece

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 211 mm, without take-up shaft -Transport width: 700 mm -Shaft: Mounting Ø100 mm, hole spacing 145 mm M12 -Quantity: 1x transport roller available -Total dimensions: Ø 213 x 700 mm -Weight: 46 kg/piece

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø200 x 210 mm -Item no.: 843 329 65 -Heating power: 7000 W -Voltage: 230-400V -Dimensions: 285/215/H185 mm -Weight: 3.4 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø56 x 25 mm -Item No.: 814 682 65 -Heating power: 215 W -Voltage: 220 V -Quantity: 2x heating tape available -Price: per piece -Dimensions: 130/130/H60 mm -Weight: 0.2 kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø x 20mm -Item No.: 814 682 65 -Heating power: 215 W -Voltage: 220V -Number: 3x heating tape available -Price per piece -Dimensions: 160/70/H20 mm -Weight: 0.1 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 215 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 70/60 mm -Quantity: 1x transport roller available -Total dimensions: Ø 215 x 880 mm -Weight: 39 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders, lifting cylinders -Hydraulic cylinder: double-acting stroke 2170 mm -Piston rod: Ø 80 mm -Recording. Ø 60mm -Hole circle: Ø 195/18 mm -Quantity: 8x cylinders available -Price per piece -Dimensions: Ø230 x 2820 mm -Weight: 175 kg/pc.

Solenoid Valve, Disc Valve, Flap Valve, Electric Solenoid Valve, Solenoid Valve, Solenoid Gas Valve, Gas Solenoid Valve -Manufacturer: Offenwanger, solenoid valve unused in original packaging -Type: VEB 212 -Valve: VEZ 000 voltage 24V -Valve body: GEB 010 -Quantity: 18x valve available -Price per piece -Dimensions of box: 125/105/H40 mm -Weight: 0.3kg/piece

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 15 BL 245 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor belt: Conveyor belt on solid stainless steel base, height adjustable -Speed: 14.5 m/min -Conveyor belt width: 385 mm -Conveyor belt length: 2195 mm -Motor/gearbox: Nord 0.55 kW see photo type plate -Total dimensions: 2215/630/H860 mm -Weight: 69 kg

PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU -Manufacturer: Siemens, Simatic S7-200 CPU 222 compact device -Type: 6ES7 216-2AD22-0XB0-Digital output: Spare part type 6ES 221-1BF22-0XA0 2 pieces. -Number: 1x module available -Dimensions: 290/80/H60 mm -Weight: 0.7 kg

flange connection, V-flange, pipe coupling, weld reduction, reduction, bobbin bottom, pipe bend, welding bend, pipe angle -Pipe bend: welding bend 90° 5 pieces -Type: EN10253-1 S235 Ø 219.10 mm -Price/Delivery: complete -Stock: other sizes/types also available, please ask -Dimensions:410/195/H160 mm -Weight: 17 kg/piece

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower for air conditioning -Type: l2HO2294D AMR075E1 -Voltage: 220-240 V -Fan wheel: Ø 350/215 mm -Total dimensions: Ø 350 x 370 mm -Weight: 5.0 kg

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift -Fork carriage: with forks -Load capacity: 12,000 kg -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Manufacturer: Lenzkes, clamping claw clamping jaw -Type: Backe 3 JSG -Clamping jaw: 100 x 50 mm -Clamping height: max. 210 mm -Groove width: 32 mm -Dimensions: 255/100/H120 mm -Weight: 10.7 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8200-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Inverting plates: 12 pieces -Dimensions: Ø 212 x 60 mm -Weight: 8.9 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head without indexable inserts -Type: Secodex R220.13-8200-C -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 212 x 60 mm -Weight: 8.2 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R220.13/23-8200-C -Mount: Ø 60 mm / Bolt circle Ø 100 x 18 mm Dimensions: Ø 210 x 60 mm -Weight: 8.2 kg

Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm -Weight: 8.3 kg

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Klump, Conveyor belt type IK 2133 unused -Width: 140 mm -Length: 7260 mm -Thickness: mm -Quantity: 1 conveyor belt available -Dimensions: 280/250/H140 mm -Weight: 2.2 kg