128,699 used machines on RESALE, but how to find them? Machine Search
Properties Volume 2160 L Material V2A (AISI 304) 1.4301 Cubic upright design Total height 1300 mm Cylinder height 1800 mm Diameter width 1200 mm Inner diameter 2000 mm Surface marbled on the outside Manufacturer: Möschle Number of feet 4 Description Tank topstock: Threaded socket 1 x Ø 50 front Cylinder: Level indicator without scale in plastic Manhole 330 x 440 mm Sample tap DN 25 Ladder hook at the top Nozzle flap Dip shank sleeve for temperature display Tank underbody: Threaded Socket DN 50 4 feet
Inv. Num. : 8729 Type: TC 215 Producer: Brother Generated: Parameters: Work table length: 500 mm Work table width: 220 mm Maximum table load (even): 75 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 300 mm Y-axis travel: 220 mm Travel Z-axis: 200 mm Number of all tools: 10 pieces Machine height: 1901 mm Machine length: 2430 mm Machine width: 1200 mm Machine weight: 1300 kg Equipment: Tool Holder
Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm
Formwork panels 21mm, used 1,777 m² used formwork panels 21mm EUR 11,00 per m² ---------------------------------------------------------------------- --------- Plywood 21mm, used 1.777 m² used plywood 21mm EUR 11,00 per m²
Center height: 210mm, distance between centers: 1500mm, swing over bed: 420mm, spindle bore: 57mm, speed range: 38–2000/min, main drive: 7.5kW, weight: 2t. Equipment: 3-jaw chuck, tailstock, steady rest, quick-change tool holder, coolant system, lighting, year of manufacture: approx. 1980–1985. No data sheet, fully functional, well maintained, ready for immediate use. Only slight oil moisture in the lower area due to age, without relevant oil loss. An on-site inspection is possible.
LINEA RIGENERAZIONE MONOVITE Diamtero vite 120/210 conico L/D 36 n.1 Degasaggio Silo alimentazione Cambia filtro a piastra Taglio ad anello liquido Vite di scorta
OLI CASE PACKER, MODEL OLI 210/OLIMAT 2P Automatic case packer. With full documentation. Composed of 2 modules OLI 210: for products in feeding, staking and introduction OLIMAT 2P: for case-shaping, closing and out feeding PLC: TSX Panel command : MAGELIS Incoterm: EXW PRODUCTION Max speed: 20 cases/mn (160 cartons/mn) Cases format range: 100 x 60 x 100 mm (min); 500 x 340 x 400 mm (max) Cases introduction: Left Product entry height: 900 mm Product exit height: 1100 mm Size: 4700 x 1600 x 2000 mm (approximately) ENERGY CONSUMPTION Power: 5 KVA, 3 x 400 V/N/PE; Operating pressure: 6 bar
OLI CASE PACKER, MODEL OLI 210 - OLIMAT 2P Compact and space-efficient. Documentation available (details on request). PLC: telemechanic TSX premium Incoterm: EXW PRODUCTION Cases format range: 100 x 60 x 100 mm (min); 500 x 340 x 400 mm (max) Max speed: 20 cases/min (160 cartons/minute) Introduction height: 900 mm; Cartons exit height: 1100 mm OTHER CHARACTERISTICS Machine size: 4700 x 1600 x 2000 mm ENERGY CONSUMPTION Power supply: 4KVA, 3-ph 400/230V/N/PE, 50 Hz, 16A Air: 6 bar
General SKU397M493 LocationBarneveld MakePentavac srl TypePENTA 2100 No.820 Year of construction2001 Specified Features - Transwrap machine Transwrap machineSealer and filler Contact parts stainless steelcheck With dosingcheck MakeOMAS Technoistemi TypeDEL 1 No.0107011 Year of construction2001 Contact parts stainless steelcheck Information Mounted on framecheck With switchgearcheck Floorspace1,5x1,2 M Total height2,1 M Weight500 KGTranswrap machinesPentavacPackaging machines > Transwrap machinesBrand > Pentavac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU404U1216 LocationBarneveld MakeBaumgartner & Co. / Alois Binderberger No.569 Year of construction1994 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume219 Ltr. Pressure2.5 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) Capacity219 Ltr. Vessel sizesdia. 750x800 mm Dished topcheck Dished bottomcheck ManholeDN300 Top connectionsDN50 (CIP) Outlet1 ½ Max. temperature-5/144 °C With propellor stirrercheck (magnetic) Motor0,25 kW, 230/400 volt, 2720 rpm Speed mixing shaft± 200 rpm Information Floorspace0,9x0,9 m CEcheck Total height1,05 m Weight210 kgPressure vesselsBaumgartnerTanks > Pressure vesselsBrand > Baumgartner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination ...
General SKU274U477 LocationBarneveld MakeVib Tech TypeSO 219/2500-UA Year of constructionunknown Main Features MaterialStainless steel Length2950 mm Width200 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter200 mm Feeder length2950 mm Closedcheck Inlet640x330 mm Outletdia. 180 mm With vibro motor0,4 kW, 230/400 Volt, 1460rpm (2x) Information Mounted on framecheck Floorspace2,8x0,8 m Total height1,8 m Weight600 kgVibro feedersVib TechConveying systems > Vibro feedersBrand > Vib Tech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
LINEA RIGENERAZIONE MONOVITE Diamtero vite 120/210 conico L/D 36 n.1 Degasaggio Silo alimentazione Cambia filtro a piastra Taglio ad anello liquido Vite di scorta
General SKU316W1182 LocationBarneveld MakeHaver & Boecke TypeUFR 219X2900 No.23/191770/02 Year of construction2002 Main Features MaterialStainless steel Length2900 mm Width219 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter219 mm Feeder length2900 mm Closedcheck InletDia. 150 mm OutletDia. 215 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm Information Floorspace2,85x0,65 m Total height0,80 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU316W1181 LocationBarneveld MakeHaver & Boecke TypeUFR 219X2350 No.23/191770/03 Year of construction2002 Main Features MaterialStainless steel Length2350 mm Width219 mm Specified Features - Vibro feeder MaterialStainless steel 1.4301 (304) Vibro feedercheck Feeder diameter219 mm Feeder length2300 mm Closedcheck InletDia. 150 mm OutletDia. 200 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm Information Floorspace2,30x0,60 m Total height0,85 m Weight180 kgVibro feedersHaver & BoeckerConveying systems > Vibro feedersBrand > Haver & Boecker What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU297T690 LocationBarneveld MakeSchrader No.1082 Year of construction1989 Pressure Working pressure0 Bar Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume215 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4571 (316Ti) Stirring vessels With paddle stirrercheck EKATO agitator type EM040 ( without mechanical seal) Closed stirring vesselcheck Capacity215 Ltr. Vessel sizesDia. 600x700 mm Dished bottomcheck Dished top sidecheck OutletDN 50 With jacket26 Ltr. Max. temperature200 °C With paddle stirrercheck EKATO agitator type EM040 ( without mechanical seal) Counter rotating stirrercheck Motor1,5 kW 220/380 Volt Speed mixing shaft80-400 rpm Information Mounted on legscheck Floorspace0,9x0,9 m Total height2,5 m Weight500 kgStirring vesselsSchraderStirring vessels > St ...
General SKU354T987 LocationBarneveld MakeArtech GmbH TypeARTOFEX TR-210 No.416026.006 Year of construction10-2002 Main Features MaterialStainless steel Motor3 KW Width245 mm Specified Features - Sieve granulator Gratercheck Rotor sizesDia: 245x245mm Sieve sizesDia: 250x245mm Sieve perforationDia: 1,2mm InletDia: 115mm Outlet890x300mm Motor3kW, 380-420/660-720Volt, 1420 rpm Speed688 rpm With extra sievescheck1 piece, 1,2mm MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Information Mounted on stainl. st. framecheck With switchcheck With switchgearcheck(as is) Weight410kg CEcheck Floor space1,35x1m Total height1,8mSieve granulatorsArtechSieves > Sieve granulatorsBrand > Artech What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...
General SKU354T1003 LocationBarneveld MakeChemtech International Ltd Type212W and WH 35F No. CC9816-01 and CC 9816-07 Year of construction1998 Pressure Working pressure40 Bar Working pressure jacket13.8 Bar Main Features MaterialStainless steel Motor7.5 KW Surface1 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Scraped surface heat exchangercheck Number of stages:2 Heating surface1,03m² Heating surface shell±0,28 Heating surface rotor±0,25m² Capacity 200kg/h Cylinder sizesDia: 152x600mm Max. temperature0-195°C With jacketcheck Rotor can be cooled/heatedcheck Max. temperature0-195°C InletDia: 50mm, 38mm OutletDia: 50mm, 38mm Motor1.1kW, 400/690volt, 1465rpm With post treatment cylindercheck Heating surface±0,5m² Cylinder sizesDia: 280x570mm Motor7,5kW, 400/690Volt, 1430rpm ...
General SKU366W1603 LocationBarneveld MakeDickow Pumpen KG TypeKMBh 26/210 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume4500 Ltr. Motor1.1 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4408, Stainless steel 1.4571 (316Ti) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity4,5 m3/h With motor1,1 kW(400 V, 1400 rpm(Ex)) Information Mach.No.PB 98164284 Mounted on framecheck Floorspace0,4 x 0,6 m CEcheck Total height0,6 m Weight150 kgCentrifugal PumpsDickowPumps > Centrifugal PumpsBrand > Dickow What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Macchinario accessoriato di robot ARBURG MULTILIFT SELECT 15 Macchinario in produzione,visionabile in funzione,zona Tunisia
Engine Brand: MTU, Condition: CORE, Nominal Power @ Nominal Rpm: 218 Kw, Nominal Rpm @ Nominal Power: 1500 Rpm, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mtu-12v183-aa51-218-core/4 22, , = More information =, , Type: Engine, Empty weight: 895 kg, Type number: 12V183-AA51-218
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 234.9 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Yellow , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 235 Kw, Rated Speed: 2400 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3126b-9zf-2129 990-used/158, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 9ZF-2129990; Transport weight [kg]: 1050
Engine Brand: CATERPILLAR, Condition: USED, Nominal Power @ Nominal Rpm: 234.9 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Air Cooling Type: EXTERN WATERCIRCUIT GEKOELDE INTERKOELER , Nominal Rpm @ Nominal Power: 2400 Rpm, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Yellow , Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 235 Kw, Rated Speed: 2400 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3126b-9zf-2129 990-used/18, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 9ZF-2129990; Transport weight [kg]: 1050
Engine Brand: MTU, Conditie: CORE, Nominal Power @ Nominal Rpm: 2150 Kw, Nominal Rpm @ Nominal Power: 2000 Rpm, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Grey , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: yes , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/mtu-16v396-te94-2150-core/ 413, , = More information =, , Type: Engine, Type number: 16V396-TE94-2150; Transport weight [kg]: 6500
turning diameter: --- mm turning length: --- mm control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity and working area • Minimum dimensions (LxWxH): 600 x 600 x 10 mm. • Maximum dimensions (LxWxH): 1680 x 1830 x 30 mm. • Maximum weight: 250 kg. • Machine opening: 1 - 100 mm. Grinding unit 1 • Contact roller: Ø 280 mm, 70° Shore Ni 37 45. • Main motor: 90 kW . • Speed: 8 - 22 m/sec (frequency controlled). • Direction of rotation: 2 directions of rotation. • Sanding belt dimensions: length 2620 mm x width 2130 mm. • Oscillation: Electronic, adjustable (2130, 1600 or 1380 mm).
Interroll roller track 2.17m with drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Series: 5600 Width: 410mm Length: 2175mm Pitch: 75mm Load Capacity: 200kg per meter Drive voltage: 400Volt Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
Horizontal turning machine manufactured in 2018. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 5,000 rpm and a chuck size of 8â (210 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details regarding this machine.
Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6â (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details.
CNC shearing machine manufactured in 2022. This Metallkraft MTBS 2100-40 B features a cutting length of 2100 mm and a motor power of 7.5 kW. It can handle a maximum sheet thickness of 4 mm at 400 N/mm². If you are looking to get high-quality shearing capabilities, consider the Metallkraft MTBS 2100-40 B machine we have for sale. Contact us for further details.
cutting diameter: 210 mm band length: 400 mm capacity 90 degrees: square: 190 mm capacity 90 degrees: flat: 240 x 190 mm cutting speed: 16/32 m/min total power requirement: 1,1 kW weight of the machine ca.: 180 Kg dimensions: 1,2 x 0,8 x 80,8 m Hydraulic hacksaw with: - Coolant device - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pallet roller conveyor 2100-1040-900 RA2439 Pallet roller conveyor segment, continuous design length: 2100 mm Roller width (RB): 900 mm, Steel rolls Nominal/outer width (NB): 1040 mm roller distance / pitch 200 mm Overall height frame: 170/380 mm for pallet weight up to 1000 kg The shown supports are included in delivery. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 0,75 kW Construction year: 1998 condition: good (used) Conveying length in mm: 2100 Nominal / outside width in mm: 1040 Roll width in mm: 900 Roll division in mm: 200 Driven: YES scope of delivery: including supports without side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen u ...
Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details.
This 3-axis Arburg 820 S 4000-2100 hydraulic injection moulding machine was manufactured in 2016. It features a clamping force of 4000 kN, a platen size of 1171 x 1171 mm, and a maximum mould installation height of 850 mm. With a screw diameter of 70 mm and an injection unit of 2100, this machine is well-equipped for high-quality moulding capabilities. Consider the opportunity to buy this Arburg 820 S 4000-2100 hydraulic injection moulding machine. Contact us for further details.
Ref. №: 4018 Sausage line The line include: HP10 E type 161 Continuous vacuum filler for straight filling and portioning Machine features: All in one 250 l hopper Standard double screw Standard double screw housing Integrated CAN-bus control: Graphical display Double screw drive with 7.0 kw AC servo Infeed scroll drive with 4 kw ac motor with frequency inverter Nominal output, total: 14 kw ;21 A VEMAG lifting and tipping device for HPE with 250 l hopper To fit standard trolley, 200 l capacity VEMAG high-performance linking machine for identical lengths with casing magazine LPG 209: For linking and portioning all common types of casing in identical lengths With casing magazine for collagen, polyamide or cellulose casings For sausage calibers from 13 to 40 mm For shirred casing lengths up to 430 mm For sausage lengths from 20 mm to approx. 400 mm Nominal ...
A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible.
Dimensions (L/W/H): 4000x2900x2100 mm Weight: 2500 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
