pt 21 used for sale

Rail wheel, flanged wheel, track roller, track wheel, wagon wheel -Roller: with angular groove, without bearing -wheel: Ø tot. 218mm -Groove width: 55 mm -Hub: Ø 45 x 52 mm -Number: 3x wheel available -Price per piece -Total dimensions: Ø218 x 87 mm -Weight: 9.9 kg/pc.

Bombled 2100 x 4 mm Max sheetthickness: 4 mm Cuttinglength: 2100 mm Strokes/min: 33 str/min Electric motor (power): 5,5 kW Length : 3500 mm Depth : 1500 mm Height: 1100 mm Weight: 3100 kg

Pressing and joint-setting machine Book height : 100 - 520 mm Book width : 120 - 450 mm Book thickness : 6.5 - 100 mm Output : approx. 150 books/hour (depending on the material used)

V-belt pulley, pulley -V-belt pulley: pulley with 8 grooves -V-belt width: 17 mm -Holder: Ø 80 x 160 mm, groove 22 mm -Hole spacing: 130mm M16 -Dimensions: Ø 212 x 160 mm -Weight: 28.5 kg

Reamers, solid drills, indexable insert drills, indexable insert drills with internal cooling, indexable insert solid drills -Widax: Indexable insert drill with internal cooling -Type: 21676017 Ø 66 mm -Hole: Ø 60 mm -Dimensions: Ø 123 x 310 mm -Weight: 7.4 kg

Hydr. Hacksaw KASTO HBS 210 / 240Masch. No. 1116 145 220 Year of construction 1994Saw range at 90 round 210 mmflat 240 x 190 mmsquare 210 x 210 mmat 45 round 150 mmSaw blade length 400 mmStroke rates 62 / 125 strokes per min. Material support height: 500 mmMotor power: 0.5 / 0.75 kWNerg connection: 400 volts, 50 Hz- Drive motor with 2 speeds- Coolant pump in the machine baseSpace required: L x W x H: 1200 x 500 x 1200 mmWeight: 170 kgGood condition; used

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, rotary encoder -Manufacturer: TR Electronic, rotary encoder encoder -Type: IE58A -Art.No: 219-00074 -Shaft: Ø 6 x 12 mm -Dimension: 85/58/H70 mm -Weight: 0.4 kg

Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg

volt: 380 V weight: 1,4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amplification -fold: 100 diameter: 560 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: 350 t dimensions of the machine ca.: 650 x 1000 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 35 + 70 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m SPECIAL PRICE! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR The dat ...

range L-W-H: 2300 x510 x 1500 mm weight: 145 kg : 20 St. Equipped with 4 high-performance castors, two with brakes. Heavy duty wheels 150 x 40 mm. All drawers are equipped with anti-slip mats. Equipped with 2 robust stainless steel handles. One lock for the door and 1 lock for all drawers. Solid wood panel 4 cm thick. Solid ball bearing guides (double bearings) for the drawers 10 drawers 12 storage boxes 13 hooks. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clutch gear, gear clutch, slip hub, slip clutch -Manufacturer: Mayr, ROBA slip hub slip clutch -Type: 3/100,210 -Sprocket: Duplex 30 teeth -Dimensions: see photos -Total dimensions: Ø 158 x 70 mm -Weight: 4.4 kg

Door opening button, push button, door opener -Manufacturer: eao, Door opening button with mounting kit (original packaging) -Type: 56-210102-00 410 -Voltage: max. 137 VDC -Quantity: 10 pieces available -Price: per piece -Dimensions: 160/140/H30 mm -Weight: 0.1 kg/pc.

Tubular frame lock, locking body, door fitting, mortise lock, escape door lock, panic mortise lock -Manufacturer: BKS, mortise lock panic mortise lock, unused Ovp -Type: B-21160-02-R-8 -Number: 4x mortise lock available -Price per piece -Dimensions box: 240/140/H30 mm -Weight: 0.9 kg/piece

sheet width: 2000 mm plate thickness: 8 mm pre-bending: total power requirement: 7,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3600x1250x1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Refrigerant: 407C, connected load: 84.8kW, length: 1066mm, width: 695mm, height: 1698mm, weight: 1.367t. On-site inspection is possible. No known defects.

Gearbox, spur gear, angle gear, worm gear -Gearbox: unfortunately without type designation -Translation: i= 131:1 -Shafts: Ø 28 x 35 mm / Ø 14 x 15 mm -Dimensions: 158/210/H158mm -Weight: 10.3 kg

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 702 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.

A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible.

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 405 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Door opening button, push button, door opener -Manufacturer: eao, door opening button with mounting kit ovp -Type: 56-210102-00 847 -Voltage: max. 137 VDC -Quantity: 1x door opener available -Transport dimensions: 170/140/H40 mm -Weight: 0.1 kg

Load capacity: 1400kg, total width: 1270mm, overall height: 3300mm, tires: polyurethane, load center: 600mm, voltage: 48V, traction motor power: 6kW, tare weight: 2736kg, battery weight: 750kg, lifting height: 10.25m, turning radius: 1613mm, travel speed: 14km/h, operating hours: 13573h. Charger included. Documentation available.

Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Control Panel -Manufacturer: Ilsemann, Control Panel -Type: 216 -Interface: V24/RS232 -Dimensions: 205/130/H60 mm -Weight: 0.9 kg

rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper -Dimensions: see photos -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Seco, shell end mills, indexable insert milling cutters SK50 -Type: R 215 16 50 049 058 09 Ø 49 mm -Dimensions: Ø 100 x 230 mm -Weight: 3.6 kg

bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg

sheet width: 2500 mm plate thickness: 3 mm distance between columns: 2540 mm total power requirement: 9 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,5 x 3,5 x 2 m No. 5120 Swivel bending machine FASTI 212 Working area: 2500 x 3 Sheet support behind the machine Space requirement approx. 4 x 4 (2) x 2 m Weight approx. 5.7 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mm square edge steel: 45 mm L-beam: 150 x 14 mm total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Space requirement 2.30 x 1.0 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic filter, filter element -Manufacturer: Hydac, ventilation filter with filling strainer -Type: ELF 5-210-3.0 -Dimensions: Ø 176 x 355 mm -Weight: 2.7 kg

surface area: 260 x 600 mm no. of flutes: 5 groove width: 12 mm total power requirement: 0 kW weight of the machine ca.: 0,06 t dimensions of the machine ca.: - m Swiveling angle table Workspace: clamping surface 260x 600 Control: permissible load 200 kg / own weight 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: div mm square edge steel: div mm L-beam: div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor roller, roller motor, drum motor, belt sander, belt sander -Drum motor: Drive drum -Type: unfortunately without a type designation -Speed: 1400 rpm -Drum: Ø 215 mm -Drum length: 295 mm -Shaft: Mountings Ø 32x95 mm / Ø 32 x 65 mm -Overall dimensions: Ø 215 x 455 mm -Weight: 57 kg

serrated knife, scraper knife, machine knife, knife -Scraper knife: blade insert 6 pieces -Type: 721 B 218 -Hole diameter: Ø 6.5 mm -Number: 6x blades available -Price/Delivery:complete -Dimensions: 345/65/1 mm -Weight: 0.2 kg/piece

round bar steel: - mm square edge steel: - mm L-beam: - mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,212,35 m div. punches and dies Foot switch Spare blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specification: Automatic plate

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 215 mm -Piston rod: Ø 20 mm -Hole: Ø 17 mm -Dimensions: Ø 50 x 500 mm -Weight: 3.6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 30 mm / Distance: retracted 430 mm -Dimensions: Ø 70 x 495 mm -Weight: 8.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 210 mm -Type: unfortunately without type designation -Piston rod: Ø 35 mm -Holes: Ø 35 mm / Distance: retracted 540 mm -Dimensions: Ø 110 x 635 mm -Weight: 20.8 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

VIET CHALLENGE 211B 1100mm calibrating machine with 2 belts: – 1st calibrating roller belt – 2nd sanding roller belt – pneumatic on/off of the rollers, from the control panel – cleaning blowers on both belts – 2620x1130mm abrasive belt development – belts with single motor 11 kW / 15 HP – rubberized pressure rollers – automatic table positioner, with digital reader – Advancement mat in good condition – variable belt feed speed – front and rear support roller conveyors Machine according to CE regulations

Chuck flange, flange mount, lathe chuck flange, driving flange, lathe chuck face plate, chuck flange for power chucks -Manufacturer: Röhm, chuck flange for power chucks, three-jaw chucks, four-jaw chucks, faceplate -Type: 55021/22-6 Ø 210 mm -Bolt circle: Ø 133 mm -Dimensions total Ø 210 x 170 mm -Weight: 12.4 kg

round bar steel: 42 mm square edge steel: 38 mm L-beam: 110 x 10 mm cutting capacity: 150 x 16 mm pressure: 60 t hole punching press: throat: 370 mm hole punching press: capacity (dia. x thick.): 25 x 16 / 20 x 19 mm : 720 x 420 mm total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Book Press with Joint Forming Format: 400x520x100mm, Book Height: upto 520mm, Book Width: 120-445mm, Book thickness: 8-100mm, Capacity: ca. 150 Pieces/hour

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

Analyzer, vapor pressure tester, Minivap VPS -Manufacturer: Grabner, steam pressure tester Minivap VPS -Type: 210-000-00 -Carton dimensions: 200/185/H320 mm -Weight: 7.9 kg