140,463 used machines on RESALE, but how to find them? Machine Search
used
Embossing press Baier GEBA 1/F, installation height 90 mm, printing capacity 800 kg, working size 10cm x 14 cm, year of construction 1973, machine number 73040, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Pressure power: 6-8 bar Air consumption: 8 l/Hub height of stroke: 12 mm : 134 mm no. of strokes: 400 Hub/min punching force max.: 3500 kp weight of the machine ca.: 80 kg Schüco pneumatic press for Schüco punching tools Art. No. Schüco: 290 124 manual included various pressing tools included! tool nr. 283073, 280162,299259,283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for secure and quick fastening of the press tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg
Gluing press Emmes Type: H EBP 500 . 10 Working length 5000 mm Working height 1530 mm Support width or depth 150 mm 10 Hydraulic Vertical Press Punch 5 pneumatic front hold-down devices max. compressive force 150/cm² Hydraulic pump 2.2 kW Oil pressure 159 kg/cm Air pressure 8 kg/cm²
Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,
Qty. 1 Second-hand aluminium extrusion press line Code Aluminium HE9 6063 Mfc.: Indian manufacturer Built: 1978 PLC hydraulic – upgradation done in the year 2005! Total Force of Press: 680 MT, 750 UST Extrusion Pressure: 210 Bar Billet Diameter: 5”, 121 mm Weight per Inch of Billet: 0.76 kg/inch Scope of supply: Log heating furnace Hot shear Extrusion press Overhead puller Under-bed cooling system Run-out cooling bed Belt conveyor Stretcher Cutting machine Die oven Conveyor table Conveyor for final packaging
A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.
SPECIFICATIONS: Working width: 3000 mm Working height: 2500 mm 4 push-button plate suspension handles TS/500 Interface 4 safety light barriers Installed power: 3 kW
punching pressure: ca. 3,2 t air pressure: 8 bar stroke: max. 20 mm distance between columns: ca. 250 x 200 mm weight of the machine ca.: 52 kg incl. various tools, see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock number: P348, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: High pressure pump, Construction: Mounted on stainless foundation with wheels, Motor: Variator gear - 3,0 kW - 350–1750 rpm., Manufacturer: Rannie, Type: 18.50, Other: Serial no. 4661/71
Stock number: D568, Liter: 12, Material: Steel 37, In stock: Yes, Amount in stock: 1 pc., Item: Tincture press, Diameter: Ø 250 mm, Other: Mechanical
Stock number: H068, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h, Working pressure theoretical: Max 10 bar, Other: Table model
Stock number: H056, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h, Other: Table model
Stock number: H063, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Low pressure homogenizer, Theoretical capacity: 600 l/h, Other: Table model
Stock number: H050, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Low pressure homogenizer, Motor: 2.2 kW - 220/380 Volt - 1420 rpm
Stock number: H046, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 4 pcs., Item: Low pressure homogenizer, Motor: 0.75 HP - 220/380 Volt, Theoretical capacity: 600 l/h, Stage: 1, Other: The homogenizer has not been used
Stock number: SF171, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Gel press filter column, Construction: Hanging in tiltable stand, Top: Air controlled press cylinder, Bottom: Product filter, Dimensions: Column - Ø 300 x H 1000 mm
Stock number: SF061, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Pressure filter, Standing: On legs, Top: Hinged, bolted lid, Chamber: Ø 530 x H 450 mm, Other: Stainless stack of plates for 6 filters
Stock number: SF015, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Gel press filter column, Construction: Hanging in tiltable rack, Top: Air driven pressing cylinder, Bottom: Product filter, Dimensions: Ø 200 x H 900 mm, Other: Dynamic axial compression (DAC) flow-through bed
145 litre, Stock number: T3886, Litre: 145, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Pressure tank, Standing: 3 pcs. legs with wheels, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Working temperature: Max 100° C, Working pressure: Max 4 Bar, Inner diameter: Ø 500 mm, Outer diameter: D 620 mm, Total height: H 1480 mm, Other: 2 pcs. inspection glasses at the side
High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics
Equipment Description Used Indirect Extrusion Press • Brand / Model: SMS Hasenclever 28 / 31.5 MN McKechinstrang” • Type: Horizontal indirect extrusion system for non-ferrous billets • Drive: Mechanical main unit with hydraulic auxiliaries • Country of Origin: Germany • Current Status: Dismantled and available for dispatch • Serial No. / Year of Manufacture: [To be confirmed] 2. Key Technical Specifications Parameter Value Main Piston Force 25.07 MN Total Press Force with Coupling 31.23 MN Max Stroke 3,070 mm Working Stroke 2,825 mm Ram Speed at 28 MN 0–64 mm/sec Ram Speed at 31.5 MN 0–57 mm/sec Billet Diameter Range Ø 230–355 mm Billet Length (cold) 320–1,320 mm Receiver Heating System Resistance; max 63 kW / 375 °C Shear Force 0.64 MN Profile Ejector Force 0.31 MN Actuation Differential Cylinders Ø 280/200 3. Included Components • B ...
Inv. Num. : 8499 Type: PEKRS 160 Producer: IWK Created: 1970 Parameters: Table length: 2000 mm Table width: 1000 mm Maximum stroke rate per minute: 55 1/min Stroke: 8-180 mm Adjusting the ram: 110 mm
hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Antike Spindelpresse - Antique Spindel Press Krause 35286 Baujahr / Year ca. 1934 - Serial-No. 35286 Pressfläche / Press Size max. 400 x 500mm Wunderschön verarbeitete antike Spindelpresse Beautifully crafted antique Spindel Press
Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 66-2 MESerial-No. 06060608Year 2006
Schuppenauslage mit Presswalzen / Stream Delivery integrated Pressing Heidelberg SKP.D ME Baujahr / Year 1996 - Serial-No. 79018/96-242508 Arbeitsbreite / Working width max. 660mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Stream delivery with integrated pressing rollers Fahrbar / Mobile Built-in controller Spreizen von Mehrfachnutzenströmen / Spreading Marking by 2 cm shifting Light barrier and counter Equipment for two-up production Integrierte Presse / Integrated pressing station Kontinuierlicher Schuppenstrom / Continuous stream delivery Auf Anfrage / On request: Netzadapter für den Eigenbetrieb / Power Adapter for SelfControl Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Visit our online Spare Parts Shop: www.shop.f1-trade.com
Birth Smoking Machine Specifications: Table size600 x 320 mm Borehole depth205 mm Drill hole length250 mm Height adjustment165 mm Engine speed 2840 rpm Weight180 kg
1000 me, used, Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 181 h, Trolly, incl. gun, 10 m HD hose,
VECCHIATO bending press mm. 2600X1300 mod. DE 120/70_800 – CE compliant - Opening mm. 1500 - 4 cylinders - Top-down movement - Protective nets - Year 2005 - Complete with manual and CE declaration
used tested briquetting press New components in the electrical box V400/50 Diameter briquette 50 mm Capacity approx. 50 kg/h
Key data: 40 t, 2000 mm
Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm
pressure: 40 t throat: 240 mm stroke: 8-88 mm no. of strokes: 57/86 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 240x200 mm hole in the table: Ø100 mm table height: 840 mm tool hole in ram: Ø40 mm weight of the machine ca.: 3,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t throat: 440 mm stroke: 19-230 mm no. of strokes: 58 Hub/min ram - range of adjustment: 100 mm table surface area: 1450x850 mm ram surface: 900x680 mm hole in the table: 300x300 mm table height: 950 mm tool hole in ram: Ø60 mm weight of the machine ca.: 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ham press Nieros, pneumatic, volume approx. 190 litres, completely in stainless steel, with numerous shelves and brackets, Dimensions LxWxH approx. 105x50x90cm, weight approx. 205kg, very good used condition, fully functional
Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.
pressure: 1000 t stroke: 600 mm weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
