project a used for sale

material width: 100 mm material thickness: 1 mm cross cut: ? total power requirement: 0,75 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Sheet Cutting Machine Workspace: 100 x 1 Drive: 0,75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Laser welding machine with 200 watt laser power - incl. 4th axis (axis of rotation) - For cylindrical welding tasks - Lamp-pumped YAG laser - Point welding machine for the finest welding tasks - for jewelry, optics, precision engineering, etc. - Welding spot from 0.1 to 3mm - For practically all metals (steel, stainless steel, silver, gold, titanium, etc.) - incl. optical microscope (10x) - Additional CCD microscope with reticle - Current, pulse width, repetition rate, frequency at the controller adjustable - incl. inert gas connection - Nd3+:YAG laser (metal cavity with xenon flash lamp) - Lamp-pumped Nd:YAG laser with 200Watt power - External cooling - Power connection 230Volt / 32 Amp. Machine dimensions approx.: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg . . . . . . --------------------------------------------------------- ...

Easiweigh Ace 2V Linear weigher Serial: 991278 Stainless, single head linear weigher, with foot pedal, 1Ph

ID3399 Bundling device horizontal and vertical year/Baujahr 1983/1994 Horizontal and vertical bundling unit, horizontal Ridder (built in 1994), vertical Signode (year of manufacture 1983) Horizontal and vertical strapping, horizontal Ridder (built in 1994), vertical Signode (built in 1983)

Oil centrifuge NEW.

For sale are 4 pieces of fully overhauled turbochargers from the manufacturer ABB. These turbochargers have an operating time of 0 hours since their complete overhaul and are therefore in mint condition. 1 piece turbocharger Z140, Ref. P/N: 634433 1 piece Turbocharger Power2 340-H44 HP, Ref. P/N: 1205685 1 piece turbocharger Z140, Ref. P/N: 634434 1 unit Turbocharger Power2 340-H44 HP, Ref. P/N: 1205686 The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any questions or for more information. We look forward to your inquiry. Connection dimensions suitable for the following motors: - Jenbacher J624

arm length: 5500 mm weight max. in kg: 250 kg swivelling range: Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.23 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Agilent G 1888 A Network Headspace Sampler 70 Vial tray, pressure control Controllable via Keypad or Agilent Chemstation

Key data: 1000 KW, 400 V

Biogas engine Waukesha. Complete CHP Brand; Waukesha Type; APG1000 YoM 2010 Hours; +/- 65,000 Voltage 400V RPM; 1500RPM Freq; 50Hz Can be delivered immediately. Can be delivered with Drycoolers, roofhoods, gaspretreatment, Remote control cabinet, GCB, Transformer, Heat exchange platform

For sale, we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and in very good condition. Main features of the machine (overall): • Possibility of combining punching and laser burning • Automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and replacement of pallets during the operation of the machine • automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of loading sheet metal during machine operation • Automatic bale boom 1500x400mm (two conveyor belts for details) • Turning station with 41 fixed and 4 rotating stations • 3 manually adjustable paws • Cutting elements on length 3020x1500 • Laser cut length 2000x1500 • Max. sheet thickness 6mm (due to brush table) • Thread function • Pneumatic low bracket Accessories for th ...

Eight segments available

Amrit Cook and Quench 2017, Stainless, Four tank washing line with cook and quench system, previously used for cooking 500Kg Chickpeas per batch, consists of four washing tanks, elevator conveyor, cook and quench system, discharge table, 3Ph

Alfa Laval Mapx 309 2 pieces available. Price 1 pcs Motor 11 kW Hydraulic capacity 9.800l /h Tools Used

Key data: 150 mm

ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28

Formats 80 x 95 - 760 x 330 mm Speed 160 m/min

weight max. in kg: 600 kg fork length: 1150 mm stroke height: 2700 mm total power requirement: ? kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 970 mm, 2200 mm, 500 1/min

Control Fanuc OiTD Centre Distance 2,200 mm Max. swing over bed 970 mm Max. Swing over Cross Slide 720 mm Max. Turning diameter 850 mm Spindle Bore Ø 230 mm R.P.M. 500 kW 37 Volts 400 Cycles 50 Including: 4-Jaw chuck, Ø 800 mm rear Pneumatic 3-Jaw chuck, Ø 600 mm front

Differential Pressure Gauge ATEQ F620 with Stäubli coupling Electronic pressure regulator from 1 to 10 bar +-500Pa with test leak Original price 9770€ Almost mint condition Production line has been phased out

Used ISERNHÄGER Sourdough Line ASB 600 RM - 3pcs available - Capacity 600 litres Visits and test runs are possible by arrangement.

Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.

Key data: 569 KW

2G Agenitor 412 Biogas Generating Set Model: 2G Agenitor 412 Capacity: 569kW Fuel: Biogas Year: 2017 V: 400 HZ: 50 Hours: 9,000 Scope: Engine, Alternator, Base Frame, Control Panel, Gas Line. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

length: . mm height: . mm volt: U2 100 V ampere: I2 40-120 A volt: U1 380 V volt: U0 280 V ampere: I1 37-48 A Manufacturer number.17763 See type plate The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 500 machines in stockMore than 8,500 m² of storage space, crane capacity 70 tMore than 10,000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Tool grinding machine, lapping machine Steel Grinding Lapping Machine Manufacturer: ABWOOD Machine LTD Item no. 122641-2 Model CGIA No. 1746 Speed: 2800 1/min. Connection: 380 V with coolant supply Weight 400 kg Support table adjustable at an angle of +-10°

ABUS Indoor Crane / Overhead Crane – 5,000 kg Lifting Capacity For sale is a used ABUS indoor crane with electric wire rope hoist type GM2050 L6. The crane is ideal for workshop, production, steel construction or warehouse operation. Crane is in very good condition, tests were carried out regularly. Technical data: Manufacturer: ABUS Kransysteme Type: GM2050 L6 Load capacity: 5,000 kg Wingspan: 9,800 mm Hook travel: 6,000 mm Control: Push-button button / pendant button Year of Make: 1991 The crane comes from ongoing operation and was used until the end. Robust industrial design with proven ABUS technology. Dismantling by buyers Viewing possible by arrangement. Loading can be supported. Sale exclusively to tradespeople. The sale is used, excluding any guarantee, warranty or return.

Advantech AMiS-60 Professional mobile workstation for the medical sector High-quality, mobile nursing trolley of the Advantech brand (model AMiS-60). This system is designed as a "workstation on wheels" (WoW) and is perfect for hospitals, nursing homes or doctors' offices to combine medication dispensing and documentation directly on the patient. Highlights & Features: Ergonomic design: Thanks to the manual gas spring height adjustment, the stroller can be infinitely adjusted to any body size (sitting or standing position) with a flick of the wrist. Safe medication dispensing: Equipped with an MDS medication box including 16 individually removable compartments. The box has an electronic control (Open/Close) and a mechanical lock for emergency access. Integrated Power Supply: The chassis houses a powerful LiFePO4 battery system designed for long runtimes and fast charging. F ...

The machine is in good technical condition, after prior agreement it is possible to test it. Maximum size of the machined part mm 1330 x 900 x 595 Max. weight of the machined part kg 5000 Axis travel X/Y/Z/U/V mm 800 / 600 / 400 / 150 / 150 Diameter of the wire used mm 0.15-03 Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone 22.5 / 100 mm Accuracy class of ball screws rpm C1 - highest Filtration system capacity l Main tank 1630l, secondary tank (Z=600) 1280 l Max. cutting speed mm/min 250 Dielectric conductivity measurement Auto – 5 ~ 200 kW-cm Dielectric temperature measurement Auto with accuracy 1C Power input kVA 15 Machine footprint mm 4350 x 3600 Height mm 2740 Machine weight approx. kg 8500 • Windows CE control system (described above) • vertical leveling device • paper filter 2 pcs • deionization resin - 1st fill • deionizati ...

Type of saw / pincer Height 1000 mm Width 1200 mm Length 800 mm Power supply: 400V 50Hz 3N Main Material Stainless steel, acid-resistant A set for cutting pork cross bones. The set includes: -Scissors - Hydraulic power unit - Balancer -Sterilizer

Key data: 22 t, 900 mm, 850 mm

Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!

Key data: 22 t, 900 mm, 850 mm

Small Electric Press Brake C9s CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D Graphics Back gauge: 2 axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under power possible at any time by appointment!

Max. size= 120 x 95 cm, Availability= 032024, Clean-Out unit for process-free thermal printing plates online model including transport bridge 95 cm input width LOT Loaded in truck or container

Automatic bread cutting machine Automatic bread slicer of modern design is made of stainless steel and fully complies with CE standards It is designed for large capacity and serial bread cutting It has a system for packing sliced bread It is easy to transport as well as to clean and maintain By removing the drawer in the lower part of the machine, the crumbs are emptied so that the machine does not require any additional maintenance Dimensions: 242 × 75 × 135cm Electrical power: 0.85kW Weight: 312kg Capacity: 1500 loaf / h Slice thickness: 6-15mm

liter capacity: 90 l/min tank contens: 100 l voltage: 220 / 380 V tank dimensions ca.: 800 x 380 x 400 mm height with motor ca.: 900 mm power capacity: 2,2 kW weight: 57 kg Condition: unchecked: Base: 820 x 390 x 650 mm The capacity liter is estimated because on the type of the motor is model KMR 90 L 4. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 600 mm, 700 mm

Ref.Nr. 00837 Name of the system: Vertical machining center Manufacturer: AXA Model VSC 2-M Year of construction 2000 Operating hours control on 51.155 h:56:02 Machine One 108350:06:047 Program run 34892:28:03 X axis stroke 2360mm/2 x 1000mm Y axis stroke 600mm Z axis stroke 700mm 1 spindle design SK 40 DIN 69 871 A 1 tool changer for 22 mounts side version 1 control panel with CNC path control Heidenhain TNC 426/430 on the left side of the machine 1 control cabinet integrated in the back of the machine Ball screws make Deutsche Star X axis 1510 – 4 – 3914 Ǿ 40 x 20 x 2960lg. Y axis 1510 – 4 – 5103 Ǿ 49 x 29 x 1300 lg. Z axis 1510 – 4 – 4811 Ǿ 40 x 10 x 1190 lg. Measuring system: Make Heidenhain X axis: LS 186 C 2440 ML Y axis: LS 186 C 740 ML Z axis: LS 186 C 940 ML Central lubrication aggregate make Bielomatik Hydraulic ...

Corona pretreatment for film Roller width = 2700 mm, Electrode width = 2500 mm, Speed = 250 m/ min electrodes = ceramic, Unloading roller = ceramic, Generator power = 6000 W, with 2 leaning rollers

x-travel: 3000 mm y-travel: 800 mm z-travel: 1100 mm total power requirement: kW weight of the machine ca.: 15 t required space: 4x6x3.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nailer OLIMPIA NAILERS model AS1500: – alternate trolley type, pallet size 1500x1500mm – 3 nail boxes, of 10 nails each – 14 clamps mounted + others supplied – hydraulic pump system, HP 10 motor Machine not CE compliant, for export

ID3422 Putzmeister Autocor M28-4 rail-guided concrete distributor Rail-guided concreting spreader

Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used lifting mixer Diosna D 200 A Plus extendable, in baker's condition, checked and tested, works perfectly, 200 kg dough per kettle, 1 o'clock, 2 courses, with 1 stainless steel kettle, stainless steel kneading arm, if necessary with another kettle for an additional 4,000€

Roll-off trolley for plastic belt, light version

Suitable for steel and plastic strapping, electro-galvanized, very robust and stable design, including a shelf and brake. Suitable for steel and plastic strapping Core diameter 406 mm, belt width 9-19 mm Core diameter 406 mm, belt widths 9-19 mm

grinding length: 600 mm grinding width: 400 mm workpiece height: mm total power requirement: 11 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

B&A REF: 8759 TON: 200 SHOT WEIGHT: 297 SCREW DIAMETER: 50MM STROKE VOLUME: 353CM3 INJECTION PRESSURE: 2050AR PLATEN SIZES: 795 X 795MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 650MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 225MM CONTROLS: SELOGICA AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY: 12KW SCREW DRIVE: ELECTRIC

Used centrifuge made by Alfa Laval type AFPX 407 BGP-74. Hydraulic capacity - maximum 5 m3/h. 2 pieces available.

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg

Used machine in good condition. Available for immediate delivery. - Max. tool length: 300/225 [350/225] - Number of tool stations: 33 - Control: HEIDENHAIN ITNC 530 - Working area (X x Y x Z): 650 x 650 x 550 mm - C-axis: 360 ? - Max. tool weight: 10 kg - Operating hours: 51.651 - Axes: 5 - Power: installed max: 16 kW - Weight: 13.000 - Dimensions (long x wide x high): 2.345 x 4.250 x 2.600 mm

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Used machine in good condition. Available for immediate delivery. - Type: Hybrid - Operating hours: 23.850 - Pressure force: 140 t - Bending length: 3.060 mm - Axes: 6 - Distance between uprights: 2.600 mm - Returning speed: 160 mm/seg - Working speed: 10 mm/seg - Throat: 510 mm - Oil tank capacity: 80 l - Weight: 9.500 kg - Dimensions (long x wide x high): 3.950 x 1.875 x 2.600 mm