project a used for sale

Full salad washing line 2 x Washing units, destoning, infeed conveyring, vibros, all electric panels Removed working and have wiring information as was installed and decommissioned by same engineers. Please message for more photographs

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electric motor, three-phase motor -Electric motor: type T 71A 4 AAB3 -Power: 0.25 kW -Speed: 2790 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 54 -Dimensions: 245/140/H170 mm -Weight: 5.3 kg

three-phase motor, electric motor -Manufacturer: ADDA, electric motor type C160L-8/6 -Power: 3.5 kW -Speed: 720 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Number: 3x Motor available -Price: per piece -Dimensions: 635/320/H410 mm -Weight: 87 kg/piece

Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.

ABG OMEGA 510 Converter  Manufacturer: ABG  Machine type: Omega 510 Converter  Type: Blanco labelling machine  Year of construction: 2010  Working width: 520 mm  Number of punching stations: 2  Equipment:  Unwinding - 76 mm  Splicing table  Side edge control  Grid take-off and matrix rewinder/grid rewinder  Label converter/label shifter for 110x75 mm format (not ABG)  Slitting station with 4 shear blades  2 separate rewinding axes  Tools: o Magnetic cylinder 134 Z or 16.75" o Magnetic cylinder 161 Z or 20.125"

Cooling water pump, radiator, water pump, engine cooling -Manufacturer: SKF, water pump -Type: AquaMax VKPC 81602 -Dimensions: see photos -Carton dimensions: 190/125/H120 mm -Weight: 1.3 kg

Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal,  ...

Rear silencer, exhaust system, muffler, silencer, charger carburetor, radiator, coolant cooler -Manufacturer: AVA, water cooler for BMW 3 Series unused OVP -Type: BW2081 -Dimensions: see photos -Carton dimensions: 660/140/H430 mm -Weight: 4.6 kg

VM PLC CONTROLLED POWDER COATING RECIPROCATOR The powder coating reciprocator is designed for automated painting applications. It ensures perfect coating of the work pieces passing in front of it by moving the spray guns up and down in a single axis. It moves in one axis along the vertical guide column, providing maximum performance under daily working conditions withstanding continuous load. The brake drive motor and gearbox have been choiceed to ensure the reciprocator’s long life and performance under heavy working environment conditions. The mechanical system design with chain or belt provides silent and vibration-free vertical movement. Perfect coating is achieved with easy adjustment of stroke and speed. RECIPROCATOR CONTROL UNIT • Remote control panel 7" 65K color hand touch LCD screen, • Two reciprocators can be controlled independently from the same display, � ...

Machining center in continuous flow Usable width 1300 mm Working Dimensions X:4200 mm / Y: 1300mm / Z: 60 mm HSD Boring Unit 10 Vertical Drill - 3x2 Horizontal - 1Saw Blade) Working Speeds X: 100m/min / Y: 100m/min - Z: 20m/min 5.5 Kw I 7.50 HP ISO 30 HSD Spindle Motor Panel Handling with Double Clamping System (Independent Servo Control) Double Sided Air Flotation Working Table AES WOP CAD/CAM Program Piece Verification System with Laser Weight (Approx.) 3.500 kg

Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK

three-phase motor, electric motor -Manufacturer: ADDA, electric motor type 100LB-4 -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B14 -Protection class: IP 55 -Dimensions: 360/200/H250 mm -Weight: 22.6 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Nebelmeyer, milling chuck SK40 -Type: Mü 45 SN 8 004 - M 16 -Mounting: Ø 33 mm -Versions: see photos -Dimensions: Ø 65 x 150 mm -Total weight: 1.4 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder -Milling holder: SK40 2 pieces -Mounting: Ø 32 mm -Versions: see photos -Price/Delivery: complete -Dimensions: Ø 63 x 150 mm -Weight: 1.0 kg/piece

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

fixed center, fixed punch center, fixed Morse taper, fixed center point, center points -Manufacturer: ABW, fixed centering tip 2 pieces -Mounting: Morse taper MK6 -Price/Delivery: complete -Dimensions: approx. Ø 64/270 mm -Weight: 5.4 kg/piece

• For brochures, leaflets • Horizontal extension arm type 150, length 245 mm • Leaflet size: length max. 55 mm, width 50-105 mm • Speed max. 115/min, max. 20,000 leaflets/h • Adjustable amount of leaflets to be dispensed • Control unit VS-2002 right • Double-sheet detector • Fill level control magazine • Control via 18-pole plug-in coupling • Electr. connection 90-240V/50-60Hz

800 x 600 445 mm 159 Piece(s)

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6/5 -Recording: MK6 -Holder tool: MK5 -Dimensions: Ø 63/220 mm -Weight: 3.4 kg

tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: cutter head holder SK50 -Mounting: Ø 22 mm / M10 -Dimensions: see photos -Dimensions: Ø 98 x 554 mm -Weight: 19.3 kg

Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: ABW, thread cutting chuck holder MK4 -Type: GBLK4 -Bore: Ø 14 mm -Number: 3x cutting chuck available -Price: per piece -Dimensions: Ø 32 x 170 mm -Weight: 1.9 kg/piece

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5/3 -Dimensions: Ø 44/80 mm -Weight: 0.6 kg

Upper support, upper slide, dovetail guide, tool slide, cross table, support slide, support carrier -Tool carriage: support carriage support carrier -Tool holder: Ø 32 mm -Dimensions: see photos -Dimensions: 460/190/H205 mm -Weight: 21.6 kg

Foil stamping - embossing Make PB&E Model Comet Year 1980 Size of the plate 150 x 200 mm Foil transport Automatic by pneumatic arm Condition machine can be purchased refurbished or "as-is" Details automatic foil transport (adjustable foil pull) adjustable embossing time, automatic table movement Available Direct

A complete unit is offered.

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Manufacturer: AROWA, four-jaw chuck No. 4 chuck size Ø 138 mm -Passage: Ø 37 mm -Bolt circle: Ø 120 mm -Dimensions: Ø197 x 110 mm -Weight: 11 kg

Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

OCME ALTAIR BOX PACKER Very nice machine in great condition. Inspections welcome. YEAR 2015 AVAILABLE IMMEDIATELY LOCATION MANCHESTER UK

Edge banding, edge trimming. Veneer roll -Edge tape: edge banding approx. 62 rolls -Type: various designs, see photos -Price/Sale: complete -Dimensions: 1120/630/H900 mm -Weight: 277 kg

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

WE OFFER AN LOW HOURS ARES SEIKI COMPLETED WIITH TOOLINGS POWER ON 39010 H OPERATING HOURS: 3436 H WORKING HOURS: 4519 H DESCRIPTION: Ares Seiki R Series R4530 CNC High Performance/ High Speed Production Center DIRECT DRIVE SPINDLE - HIGH SPEED 3 AXES RAPID TRAVERSE HIGH RESPONSE SERVO SYSTEM TECHNICAL INFO: X : 450 mm Y : 300 mm Z: 300 mm RPM12,000 RPM ATC12 TaperBT30 Dimensions1200mm x 2230mm x 2480mm WEIGHT : 2200 KG MACHINE WILL BE AWAILIBLE TO LOAD IN NEXT WEEKS

Grinding wheel mount, standard flanges, special flanges, grinding wheel flange -Grinding wheel mount: Mounting diameter: Ø 76 mm -Shaft: Perforated shaft cone Ø 45-58 mm -Number: 3x mounting flanges available -Price: per piece -Dimensions: Ø 148 x 55 mm -Weight: 3.9 kg/pc.

AEW Thurne Poly slicer – meat & cheese Machine No & Year: Unknown 380/480 3phase 5500mm Long x 1250mm Wide x 1900mm High

Key data: 750 mm, 500 mm, 600 mm

Inv. Num. : 7098 Type: DBZ Producer: AXA Created: 2008 Parameters: Control system: Heidenhain iTNC53O Duty cycle: 57676 h Hours: 23680 h Work table length: 1000 mm Work table width: 500 mm Maximum table load (even): 800 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 2x 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm Maximum tool diameter: 85 mm Max. tool weight: 8 kg Max. tool length: 400 mm Number of stacking positions: 22 pieces Machine height: 3550 mm Machine length: 4460 mm Machine width: 2250 mm Machine weight: 12000 kg Equipment: Chip conveyor 300m Suction Showa CRD-1500RA-CE-0043 Preparation for the 4th axis

The machine is designed for automatic gluing of various types frames and profiles covered with foil, varnished or otherwise finished in the shape of rectangular or polygonal. The material of MDF frames glued together. The machine is dedicated to the production of picture frames and finishing frames in doors. Fully automatic work cycle. Max. slat size: -width 120 mm -height 65 mm -minimum element length 250 mm -capacity about 100 sets. Frames The device is suitable for hot melt adhesive. The dimensions of the device are 1100 x 850 x 1300 mm. Weight 160 kg Pneumatic system 6 bar.

Mixer M 260, volume 260 l, max. load 160 kg, connected load 400 V / 2.2 kW Mixer M 260, Volume 260 l, max.capacity 160 kg, electrical connection 4 V / 2,2 kW

PJ Hare AM300 Pie Press Serial: 9B91140 2009, Twin pie press, 100mm diameter presses, on tabletop mobile frame, 1Ph

Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 015 322 0020 -Quantity: 1x mounting flange available -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Manufacturer: Abus, 3 pieces cable trolley plastic with polyamide rollers -Type: flat cable -Shipping/Price: complete -Dimensions: 90/70/H75 mm -Weight: 0.1 kg/piece

Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Cable trolley: Cable trolley with polyamide rollers -Type: Round 10-16 mm -Number: 1 cable trolley available -Dimensions: 80/80/H93 mm -Weight: 0.1 kg

Automatic hardcover counter strainer equipped with: • Automatic Cover Feeding • Automatic carton feeder from 1 to 5 pieces • With servo motors and 3 photoelectric sensors for the registration of the sheet on the side and diagonal cardboard • Automatic viscometer • Touch screen for convenient and quick adjustment of the machine It allows cardboard lining with window and cardboard lining with some irregular shapes (such as some non-straight side). Maximum format size of 900 x 460 mm

Key data: 630 mm, 560 mm, 560 mm

Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m

Power supply module, servo amplifier module, CNC control system, plug-in card -Manufacturer: FANUC -Type: A06B-6150-H075 -Dimensions: 300/380/H290 mm -Weight: 20.3 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Key data: 75 , 10 , 691

Parameters: -Max. pressure 10 bar - capacity 691.2 m3/h - power 75 kW - Built-in dehumidifier - PREVENTIVE MAINTNANCE support in 2019.

PLC controller, connection module for digital electronic modules, terminal module -Manufacturer: Fanuc, Terminal I/O Basic Dual Module -Type: A03B-0823-C001 A03B-0823-C003 -Price/Sale: complete -Dimensions each: 140/130/H150 mm -Weight: 0.9 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Alfa Laval Plate Heat Exchanger T20-BFG heat exchanger from 2008, complete (closed model), 1 available. 221 L, 10 bar Manufacturer: Alfa Laval Model No.: T20-BFG Type: Plate Heat Exchanger Serial Number: 30106-36399 Capacity [L]: 221 Pressure [bar]: 10