project a used for sale

Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm

Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h

Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg

Derinder Weber Type: ASC 460 Engine power : 1.1 kW Connected load : 400V/50 Hz/16 A Weight: 315 kg Dimensions: Width 910 x Length 890 (with bands 1800 mm) Thickness adjustment : from 0 - 15 mm Spring-loaded cutting system Pressure roller automatically adjusts to the cutting height Max. product setting 90mm Feeding and discharge conveyor with quick-release device Cleaning : Disassembly/assembly of all product-carrying parts without tools Integrated crate support Request a quote INTER-WIBA Sp.j. Ul. Krakowska 263 Pl 43-305 Bielsko-Biała NIP PL547-17-47-669 Phone 0048/33 812 58 60

ype: KRAMER + GREBE MW 200 Completely made of special stainless steel Specialized for grinding cheese and yellow cheese BLOCKS Hole plate diameter: 200 mm Hopper capacity: approx. 400 liters Synchronized speed for shatter and feed screw Working worm Machine dimensions in сm: Width: 215,0 Depth: 150,0 Height: 196,0 Main Motor Power: 45 kW Installed Power approx. 65 kW Voltage: 380 V, 50 Hz

Fan, blower, radial fan -Manufacturer: AMA, fan, radial fan -Type: Motor 25105109 -Power: 0.6 kW / 2800 rpm -Voltage: 220/380 V -Fan wheel: Ø 225 x 70 mm -Dimensions: Ø 300 x 370 mm -Weight: 13.2 kg

Thermal system, fan heater, heating elements -Manufacturer: Ziehl-Abegg, axial fan, axial fan, heating fan -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg

Completely made of special stainless steel Working worm and feeding worm Holeplate diameter: 160 mm Hopper capacity approx. 360 liters Cutting set consisting of: 2 knives, 1 kidney plate, plates with hole diametrs 4 and 13 mm Machine dimensions in cm: Width: 125,0 Depth: 230,0 Height: 210,0 Installed power: 37,5 kW Voltage: 400 V, 50 Hz

Oven Make: Carbolite Model AX60 395mm high x 400mm wide x 420mm deep 220/240 volts Single phase

Fan, ventilator, blower, duct fan, pipe fan -Manufacturer: SEW-Eurodrive ebmpapst, fan blower ventilator -Type: A4S 200-AA 02-01 0.042 kW / 1350 rpm -Voltage: 230 V -Dimensions: 225/210/H210 mm -Weight: 2.9 kg

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK2 2 pieces -Type: GB2a -Bore: 1x Ø8 mm / 1x Ø5 mm -Delivery/Price: complete -Transport dimensions: 220/130/H63 mm -Weight: 3.0 kg

Machine can be used as stretch bander with shrink tunnel and as full wrapping machine with side folding/sealing. • Output max. 22 packs/min., depending on the format • Straight infeed • Sealing width max. 440 mm • 2 infeeds: For cartons and bottles • Cartons, insertion length 60-360 mm, insertion width 60-200 mm, insertion height 30-165 mm • Bottles, insertion width/Ø max. 41 mm, insertion height max. 180 mm • Packing material PE/PP • Film width max. 345 mm • Format change approx. 15 min. • Stacking device • Shrink tunnel Skinettatherm with 2 blowers, 20-600°C • Outfeed conveyor after shrink tunnel 1,200 x 380 mm • PLC Siemens S7-300, touch screen Siemens Simatic TP27 • Drive 400V/50Hz

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: MK2/1 AMUCM2/1 TGL30-21-114 -Dimensions: Ø 19 x 92 mm -Weight: 0.1 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: MK6/5 -Dimensions: Ø 64/120 mm -Weight: 1.5 kg

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 150 x 15 mm, cross-toothed -Hole: Ø 32 mm -Weight: 1.2 kg/piece

shell end mills, cylindrical milling cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 125 x 12 mm, cross-toothed -Hole: Ø 32 mm -Quantity: 1x cutter available -Weight: 0.8 kg

Tool trolley -SK50 recordings: 10 pieces -Tool trolley: with 5 plastic handles -various cutter heads -various roller milling cutters

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: aba, outside micrometer -Measuring range: 0-25 mm -Reading: 0.01 mm -locking device -Number: 2x micrometer available -Price: per piece -other sizes: also available -Case dimensions: 175/90/H30 mm -Weight: 0.6 kg/pc.

Offer 23291 Specifications: End processing machine for pipes with six-fold turret - tool holder Tube diameter 6 - 40 mm Max. forming length 100 mm Drive 400 V / 7.5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Gearbox, Angle Gear, Worm Gear -Manufacturer: Bonfiglioli, bevel gear from packaging machine ILAPAK Astra-STD -Type: RAN 20/SB -Translation: i = 1:1 -Shaft: Ø 20 x 50 mm -Direction of rotation: see photo -Dimensions: 240/210/H75 mm -Weight: 4.1 kg

Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Cutting head: Walter type F 2010 Ø80 mm -Disc cutter: Ø100 x 5 mm -Price/Sale: complete -Dimensions: 300/100/H195 mm -Weight: 7.4 kg

Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item Condition: New as pictured Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg More items - new and used - can be found in our shop! International shipping costs on request!

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve -Type: Adapter MK2/3 -Dimensions: Ø 36 x 196 mm -Weight: 0.7 kg

collet chuck, tool holder, tool holder, milling chuck, milling tool -Manufacturer: Clarkson, 2 pieces collet chuck SK50 -Type: Autolock / Qualcut -Clamping sleeves: Ø 6/19/25 mm -Delivery/Price: complete -Transport dimensions. 300/190/H100mm -Total weight: 11.4 kg

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Alfa Laval, air-operated double diaphragm pump -Type: DL25-AA-EET-Q -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 240/230/H300 mm -Weight: 8.7 kg

electric motor, three-phase motor -Manufacturer: Schorch, electric motor type KA72071-ABO34-7 -Power: 30 kW -Speed: 2950 rpm -Shaft: Ø 55 x 110 mm -Design: B3/B5 -Protection class: IP 54 -Dimensions: 790/510/H410 mm -Weight: 244 kg

standard cooler, car cooler, oil cooler, heat exchanger -Manufacturer: AKG, light metal oil/air cooler from screw compressor Boge VLED 30R-11A -Type: 0720.067.000 -Pressure: max. 15 bar -Dimensions: 650/360/H550 mm -Weight: 40 kg

Condenser Centauro Type: ACI/R 263/96.9Y Cooling capacity: 48,3 Kw Air flow: 11400 m3/h Number of fans: 2x630 mm RPM: 660/520 Dimensions: 2880x630x1230 mm Entry/exit diameter: 42/35 mm Quantity in stock:1 Stock number: SK104 Condition: Used

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

multi-function punch, punch, hole punch, pneumatic hole punch -Article number: 296 346 -Dimensions: 800/400/H1200 mm -Weight: 170 kg

pressing tool, sheet metal former, forming tool, ball forming tool -Pressing tool: ball forming tool -Radius: 50.11 mm -Hole: Ø 40 mm -Dimensions: Ø 165 x 270 mm -Weight: 18.4 kg

GE Äkta Explorer FPLC 100 Air/General Electric/Cytiva -Box 900 -pH/C 900 monitor -UV 900 UV Detector -UV Flow Cell -P 900 Pump /100ml/min w. Switch Valves Air 900 Control Box -pH Sample -Conductivity Cell -INV 907 Injection V1 Sample Valve V5 Outlet Valve V4 Column Valve V2 Column Valve V 3 -P 960 -M 925 MIxer (2ml) on request 5 and 12 ml) FR 902 Restrictor CU-950 Interface Unicorn Software -Frac 950 Faction Collector warranty

three-jaw chuck, three-jaw lathe chuck -Manufacturer: AROWA, three-jaw chuck chuck size Ø 250 mm -Passage: Ø 76 mm -Bolt circle: Ø 223 mm -Dimensions: Ø250 x 125 mm -Weight: 22 kg

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack, electronic module -Manufacturer: Infra-Antriebe Hans Nelk, Control Electronic Modul Classic -Type: Q1-230 -Individual components: see photos -Dimensions: 240/200/H100 mm -Weight: 3.2 kg

gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, gear motor type IIb / DLB 421 -Speed: 50 rpm -Power: 0.8 kW -Design: B3 -Shaft: Ø 35 x 80 mm -Dimensions: 475/240/H235 mm -Weight: 38 kg

thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Lenze ABW, thread cutting chuck MK2 -Type: GB2a -Dimensions: Ø 62 x 207 mm -Weight: 1.2 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, drive motor, gear pump -Manufacturer: Bucher, hydraulic pump, gear pump -Type: AP200/8.5 S 259 -Flange/shaft: see photo, square 8 x 17 mm -Number: 7 pumps available -Price: per piece -Dimensions: 84/82/H100 mm -Weight: 2.0 kg

Professional horizontal packing machine from a reputed manufacturer. Suitable, for example, for packaging food, sweets, medical devices, technical articles, printing and paper products, household and toys, and textiles. Package width: 35 – 100 mm Ilbuifcbkb Package length: 65 – 160 mm Package height: 5 – 35 mm Capacity: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50 -60 Hz / 2.7 KW

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic tank from vertical lathe Scherer VDZ 80 DS -Motor: ATB 0.5 kW / 2820 rpm -Individual components: see photos -Dimensions: 360/190/H540 mm -Weight: 14 kg

x-travel: 620 mm y-travel: 520 mm z-travel: 460 mm CNC-control: iTNC 640 HEIDENHAIN Table dimensions: Ø 650 mm max. table load: 300 kg spindle taper: SK 40 spindle turning speed range: 12.000 U/min feed range: 1 - 20.000 mm/min rapid traverse: 36 m/min coolant: IKZ 30 bar voltage: 400 V total power requirement: 25 kVA weight of the machine ca.: 9,2 t dimensions of the machine ca.: 2,35 x 4,15 x 2,95 m chip conveyor: 2,60 x 1,65 x 1,20 m Oil cooler: 0,50 x 0,70 x 1,45 m water cooling unit: 0,70 x 0,70 x 0,80 m - Serial-No.: 6LUD00185 - Control ON: 10.918 h - Spindle ON: 2.725 h - Control: HEIDENHAIN iTNC 640 - 3-D touch probe HEIDENHAIN TS 740 - Travel distance B-Axis 50º/+110º,C-Axis 360º - Internal coolant supply through spindle 30 bar - Electr. handwheel - Laser tool measurement - chip conveyor - suction The data for this ad was created with ModulMWS - the software solution of L ...

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-37 -Type: Ø 340x5.0/3.5 x 45 Z 108 = T 9.89 -Art. No.: 1010-1081894X HW -Speed: n max. 5400 rpm -Number: 7x saw blade available -Price: per piece -Dimensions box: 410/410/H10 mm -Weight: 2.6 kg/piece

saw blade, wood saw blade, circular saw blade -Manufacturer: AKE, saw blade 904-12 -Type: Ø 400x3.5/2.8x60 Z 72 = T 18.32 -Art. No.: 0211-5107670X HW -Speed: n max. 4300 rpm -Number: 3x saw blade available -Price: per piece -Dimensions box: 490/490/H10 mm -Weight: 3.2 kg/piece

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Manufacturer: Arntz, saw blade Ø 520 x 4.5 mm -Inner diameter: 80 mm -Bolt circle: Ø 123 x 23 mm -Number of teeth: see photo -Weight: 6 kg

Stainless steel couplings, pipe coupling, pipe sleeve, pipe connection -Manufacturer: TEEKAY, pipe coupling AXILOCK-S Type IV -Inside: Ø 57 mm / 2.2 inch -Pressure: 16 bar -Number: 1x clutch available -Dimensions: 95/85/H90 mm -Weight: 0.9 kg

oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Kaeser, oil-water separator -Type: Aquamat 4 -Dimensions: 530/480/H1000 mm -Weight: 22 kg

sunroof, glass roof, car glass roof, tilting roof, pop-up sliding roof -Manufacturer: Monza, sunroof type Air Light 1 Ovp -Size: 780 x 410 mm -Dimensions box: 780/410/H55 mm -Weight: 5.3 kg

Standard cooler, car cooler, oil cooler, heat exchanger, compressor cooler, hydraulic oil cooler -Manufacturer: AKG, light metal oil/air cooler with filter -Type: 5.1074.4 1109.069.0000 -Pressure: max. 15 bar -Dimensions: 1090/420/H715 mm -Weight: 61 kg

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg