project a used for sale

Three-phase motor, electric motor -Power: 3 kW -Speed: 1400 rpm -Shaft: Ø 28 mm -Design: B35 -Protection class: IP 54 -Number: 15 electric motors available -Price: per piece -Weight: 26 kg

Three-phase motor, electric motor -Condition: unused -Power: 2.2 kW -Speed: 1400 rpm -Shaft: Ø 28 x 60 mm -Design: B3/B5 -Protection class: IP 54 -Number: 14 electric motors available -Price: per piece -Dimensions: 370/260/H260 mm -Weight: 23 kg

Cariba AV30/132 vertical cartoner, intermittent motion, reverse tuck closure, machine on wheels, carton size range: min. 15 x 15 x 70 mm (AxBxC), max. 200 x 120 x 300 mm (AxBxC), output up to 50 strokes/minute, electrics 400V/50Hz, machine footprint approx. 2900 x 1600 mm (LxW), machine height approx. 1695 mm, machine net weight approx. 900 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: MF 04 520-HN -Price: per piece -Quantity: 4 available -Weight: 0.2 kg/piece

Pressure transducer -Type: PMP131-A3101A1X -U: 12...30 VDC -Weight 0.5 kg

Cam switches, circuit breakers, motor protection switches -Type: 9/12 -220-240 V 1300 W 50-60 Hz -Weight: 1.2 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg

Agilent 1200 HPLC system consisting of: Agilent 1200 G 1312B SL binary HPLC pump (up to 600 bar) Agilent 1200 G 1315B Diode Array Detector Agilent 1200 G 1316 B TLC SL Colcom/column thermostat Agilent 1200 G 1379 Degasser Agilent 1200 G 1330 Thermostat for Autosampler Agilent 1200 G 1367D Autosampler Hip ALS SL + on request with Agilent Chemstation/Warranty

Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Roller chain, drive chain -Type: AZ22521 -Weight: 2.1 kg

Waters Acquity UPLC-MS System, Used Acquity UPLC-MS System by Waters from 2009, used very little, with systematic proof of maintenance, from a large pharmaceutical company, with 6 months warranty and training and installation at the customer's site. . The system is sold with an additional set of spare parts in the form of an identical UPLC system (without MS). Each system can be viewed and tested in operation. The UPLC-MS system consists of the following parts: - SQD mass detector - Sample Organizer - Sample Manager - PDA detector - Binary Pump Manager - Column Manager Price complete system with additional modules as spare parts

Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled

Circuit breaker, switch, push button -Type: 3NJ6 010 -In 125 A -Weight: 6.2 kg

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Contactor, semiconductor contactor, contactor -600 VAC 55 A -Quantity: 1 piece available -Price: per piece -Weight: 1.8 kg

NH fuse -NT 4 -1000 A 500 VAC -Price: complete -Number: 2 pieces -Weight: 4 kg

resistor, wire potentiometer, resistor -Types see pictures Price: complete Packages: 4 -Bags: 25 -Weight: 8.5 kg

Propeller mixer Manafacturer: ABB Propeller blade diameter: 250 mm in EEx Protection LWH: 300 x 300 x 800 mm

Fixed stop side on the left. Brief description of the equipment: - Fixed stop side left - Workpiece transport device - Upper pressure - Control Power Control PC22 - Release agent spraying unit - Joining milling unit, 2 x 3 kW - Gluing part A20 Basic for rolls up to 3 mm and strip goods up to 20 mm, with melting unit with granulate container and quick-clamping system - Cross-cut unit, 2 x 0.8 kW, with pneum. Dissimulation - Lubricant spray agggregat - Pre-milled aggreagt 1.5 kW, pneum. adjustable - Mould milling unit FK13, 2 x 0.4 kW - Universal milling unit 4 kW, controlled, with infinitely variable axis - Multi-plastering device MN21 autom. - Finishing unit FA11, with finishing device, detergent application and buffing unit, pneum. adjustable -Noise protection - Free space for additional processing units Further equipment information: - Machine stand throughout f ...

Terminal box, aluminum housing, housing systems, Klippon -Type: AB812027 -Size: 95/83/H35 mm -Price: per piece -Number: 4x available -Weight: 0.3 kg

Citrocasa 8000 SB-ATS orange juicer Comes from an insolvent REWE store Built in 2018, but was not in use for the last two years until the eviction The machine makes a very neat impression The protective cover on the left side has a nose broken off. This does not affect the function, the cover can be replaced. There is still cleaning and disinfecting agent in the base cabinet with which the machine can be kept clean and germ-free. It starts up when the tap is actuated, but can also be switched to continuous operation.

Frequency converters, frequency converters, drive converters, controllers, variable speed drives, servo drives -Manufacturer: ABB, frequency converter type ACS101-K25-1 -Operator panel: ABB ACS100-PAN -Input: 200-240 VAC 50 / 60Hz -Output: 0 ... 300 Hz 1.4A -Dimension box: 200/180 / H100 mm -Weight: 1 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

Tetra Pak TCAP/21 1000 ml ReCap 3 Applicator We offer: Tetra Pak TCAP/21 ReCap 3 applicator for 1000 ml Tetra Pak beverage cartons, Year of construction: 2004 - in very good condition - optimally maintained Subject to prior sale

Agilent 5973 N MSD Detector with Edwards turbomolecular pump or diffusion pump, used and refurbished on request also complete as measuring station with Agilent 6890GC Please inquire about the price per piece

GE Äkta Purifier 10 FPLC System Box 900 P 900 Pump /10 ml pump heads UPC 900 Monitor INV 907 Valve M925 Mixer / 6 ml mixing chamber Conductivity Flow Cell pH Sample CU 950 Interface/Communication Module FRAC 920 Fraction Collector Unicorn Software

Agilent G 1362 A RID Detector Refractive Index Range 1.00-1.75 RIU Measurement Range +/- 600x 10-6 RIU Sample Cell 8 ul Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN

Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Price/Sale: complete -Overall dimensions: 220/140/H110 mm -Weight: 4.2 kg

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

Agilent G 1321A Fluorescence Detector Ex Monochromator range 200 – 700 nm Em Monochromator range 280-900 nm Wavelength characteric Repeatability +/- 0.2 nm Accurcacy +/- 3 nm Flow cell 8μl Analog Output/Recorder/Integrator 100mV or 1 V Communications: CAN, GP-IB, RS 232; LAN Remote: ready, start, stop and shut down signals

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 18 - 110 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

Electric motor, three-phase motor -Manufacturer: ADDA, electric motor type SP160M2-2 -Power: 15 kW -Speed: 2930 rpm -Voltage: 380/660 V -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 610/325 / H415 mm -Weight: 123 kg

Three-phase motor, electric motor -Manufacturer: ADDA, Electric motor type AE132S-5 -Power: 3/3.6 kW -Speed: 950/1140 rpm -Shaft: Ø 38 mm -Design: B3 -Protection class: IP 54 -Price: per piece -Quantity: 1 available -Dimensions: 440/260/H310 mm -Weight: 42 kg

KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...

CINCINNATI ACW6 slitting line is used in the processing of thin steel sheets with a maximum thickness of 4 mm. The process consists in gradually unrolling the sheet coils towards cutting rollers with special roller knives with a thickness of 5 to 30 mm, and then passing the sheet between the rollers for precise slitting. After the slitting process, the sheet is wound onto coils ready for further processing. The ACW6 slitting line guarantees the highest product quality while making optimum use of the raw material. The CINCINNATI coil slitting line consists of: – sheet decoiler – sheet metal winder – roller knives (thickness 5 mm, 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – ejector spacers (width 10 mm, 12 mm, 20 mm, 25 mm, 30 mm) – slitting aggregate unit – brake Technical specifications of the CINCINNATI ACW6 slitting line - maximum sheet thickness: 4 mm - minimum shee ...

face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver -Type: MS6 -Mount: MK6 / M42, see photos -Total dimensions: Ø 108 x 278 mm -Weight: 7.9 kg

Machine Reamers, Reamer, Reaming Tool, Passknife Cutting Set -Machine reamer: Reamer with holder -Diameter: Ø 59 mm -Holder: DIN 219 MK5 -Total dimensions: Ø 59 x 442 mm -Weight: 5.6kg

electric motor, three-phase motor -Manufacturer: ADDA, Electric motor type C71-2 -Power: 0.55 kW -Speed: 2810 rpm -Shaft: Ø 14 x 30 mm -Design: B3 -Protection class: IP 54 -Dimensions: 240/180/H140 mm -Weight: 6.2 kg

ERIKA RECORD dough dividing and warp knitting machine Automat Type 4 - used, refurbished in 2023 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough enclosing ring Piston with non-stick coating Swivel machine head for easy cleaning Dividing knife electrolyt-plated four active times and active time switch-off (parts/presses only) no oil in the working area of the machine Machine with heavy casting stand for vibration-free operation Long-lasting, low-wear drive complete with three plastic knitted plates

ERIKA RECORD dough dividing and warp knitting machine semi-automatic type 4 - exhibition machine, brand-new condition, year of manufacture: 2025 - Type 4, 30 pieces, working range 40 - 120 g removable plastic dough embracing ring dough piston with non-stick coating tiltable machine head for easy cleaning dividing knife electrolyt-plated no oil in the working area of the machine machine with heavy casting stand for vibration-free operation complete with three plastic moulding plates

Wood band saw, band saw machine, band saw, vertical band saw -Band saw: Vertical band saw -Drive: 5.5 kW -Cutting width: max.780 mm -Cutting height: max.300 mm -Saw band: length 5500 mm -Dimensions: 1800/875/H2440 mm -Weight: 870 kg

Cool Guntner Type: S-CPGHN 080.2F/210-AU2/18P. E Fin spinning: 10 mm Fans: 2x800 mm Dimensions: 400x170x140 mm Refrigerant: CO2 Volume: 99.8 l Quantity in stock: 2 Reference number: CH 405 Condition: Used in good condition

Three-phase motor, electric motor -Manufacturer: AEG, electric motor type AD80K6R3 -Power: 0.33 kw -Speed: 850 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 250/200/H165 mm -Weight: 10.2 kg