127,338 used machines on RESALE, but how to find them? Machine Search
10 x WICHMANN AXAG - AXA liner 10 pieces available in our stock in Istanbul Turkey in Very good condition Please contact : info@fin-marine.com
Manufacturer: AEG Germany Equipment Type: Back Pressure Steam Turbine Generator Power Output: 11,200 kVA (≈ 9 MW) Voltage: 6.5 kV Frequency: 50 Hz Speed: 3000 RPM Generator Type: S 688/4 Condition: Available As-Is, Where-Is Technical Specifications Electrical Output: 11,200 kVA (9 MW) Inlet Steam Pressure: 65 bar Inlet Steam Temperature: 440 °C Steam Consumption (Full Load): 60 tons/hour Exhaust Steam Pressure: 2.5 bar (Max) Exhaust Steam Temperature: 190 °C Voltage: 6.5 kV Frequency: 50 Hz Speed: 3000 RPM Generator Insulation Class: B Description High-capacity AEG Back Pressure Steam Turbine Generator designed for industrial power generation and energy recovery applications. This 9 MW steam turbine system is suitable for industries with continuous steam availability such as: Sugar mills Textile mills Chemical plants Paper mil ...
Equipment Manufacturer Power Speed Generator BRUSH 3125 kVA 1500 rpm Gearbox Allen Gears 3860 kW 1500 rpm 1Generator Manufacturer: BRUSH Electrical Machines Limited Main SpecificationsParameter Value Parameter Value Type AC Generator Rated Output 3125 kVA Speed 1500 RPM Voltage 10,000 V Current 180 A Frequency 50 Hz Phase 3 Phase Brushless Excitement 2. Gearbox Manufacturer: Allen Gears Limited Location: Pershore, England Type Epicyclic / Planetary Gearbox Technical Specifications Parameter Value Model APG 23 Serial No. X5/40848 Year 1980 Type Planetary Gear Gear Ratio 9.473 Performance Parameter Value Rated Power 3860 kW Duty Power 3355 kW input Speed 14,210 RPM Output Speed 1500 RPM CT INDUSTRY 2 Rue laennec Rosny sous bois 93110 GSM 06 03 86 59 55
Miwe aero in-store oven Type: AERO AE 6.0604 digital control for 6 sheets 60×40 cm with lower shelf for 16 sheets 60×40 cm Year of construction 2007 Specifications: 400V / 230V / 3/N/PE / 15.4 kW / 50Hz Electric Dimensions: Height: approx. 175 cm Width: approx. 90 cm Depth: approx. 88 cm
The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg
2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually
Electric motor AEG IP 54 Year of construction 1991 Type AM180LC 22kW Price 250,00€ net
Electric motor AEG IEC 225M IMB 5 Year of construction 1996 Type AM 225 MC 404 52kW Price net 250
Offer coupling with the part. 402064 for sale.
Electric motor AEG type 1LA6 1864AA71 Year of construction 1987 22kw Price 250€ net
Year of Make: 2014 Machine Number: API730798 Hours: 504 New compressor at 504 hours New operating hours display April 2025 Make: Atlas Copco Made in Belgium Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient motor with belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Nominal power motor 3.7 kW Engine rotation 2885 rpm Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressur ...
Belt conveyor/webbing/conveyor belt 9.77 meters Manufacturer: AMI Year of Make: 2016 Condition: used Total length: approx. 9770 mm Total width incl. motor: approx. 770 mm Total width without motor: approx. 690 mm Conveyor width: approx. 600 mm Belt width: approx. 600 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: 300 mm/80 mm Incl. SEW motor 0.55 kW/r/min. 1360/87 Harness must be fitted on site Internal Article Number: 2026031801 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics ...
A smelting furnace from Stotek is being sold. Year of manufacture 2022. The plant has to be dismantled and loaded by yourself. The AME is part of the range of Støtek crucible furnaces for melting and holding aluminium. It is a static, high-efficiency, electric furnace for aluminum melting and holding. It is typically used as a baling oven. The separate control panel is designed for simple and easy operation. Thyristors, efficient PID regulation and high-quality heating elements ensure a minimum operating temperature with high energy efficiency and a long service life. The robust and intelligent design makes it possible to replace the heating elements with a minimum of interruptions, even when the crucible is hot and filled with metal.
Nagy PB-80 Pallet rack attachment panel With a standard pallet height (1.20 m), you can install 6 crossbeam levels in the 10.3 m high extension field. Together with the storage spaces on the floor, this results in 7 storage levels on top of each other, which means a total of 28 pallet spaces per shelf area with 4 pallets per compartment. Material & Construction: The galvanized surface offers long-lasting corrosion protection. In contrast to welded frames, the bolted truss (diagonal and cross struts) allows the easy replacement of individual components in the event of damage (e.g. due to forklift trucks). Profile: The profile size of 80 x 60 mm is a typical dimension for medium to heavy pallet rack supports to ensure the necessary buckling stiffness at heights of over 10 metres. Manufacturer: Nagy Type: PB-80 Stand height: approx. 10.30 m Stand depth: approx. 1.10 m S ...
working width: 6 m Number of gangs: 4 0 Number of folders: 1 0 Number of rollers: 1 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation
used press container Manufacturer: AVERMANN Type: MPC 10 Year of construction:? specifications: Pressing force: 38 t Drive power: 5.5 kW ? Capacity: 10 m³ Machine weight: 3,000 kg
Number of rows: 12 0 distance between row: 45 cm Working with: 5,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year: 2021 (brand new machine, immediately available) - stable cast iron construction - hydro-pneumatic controls - adjustable position of the heads - lowered thrust unit (30 mm hoof) - profile supports - scissors stroke: 10.5 mm - working stroke of the clamp: 80 mm - crimping height: 120 mm - crimping point: 30-60 mm
Several used TiTech Autosort and Polysort 700 1.000 and 1400 devices available
; Gross weight [kg]: 2000; Front tyre size: 155/80 R13; Rear tyre size: 155/80 R13; Wheelbase: 3075; Vehicle outer dimensions [m]: 4,35x1,6x1; Cargo space dimensions [LxBxH]: 3,05x1,5; Max payload [kg]: 1665
SUITABLE FOR PRINTING: BOPP, PP ,CAST, ALU, LDPE, NYLON, PETP, OPA, Paper, PE, CPP, BOPET BOPP: 10 - 100 microns CPP: 20 - 100 microns PET: 12 - 80 microns Printing Width: 1200 mm Web Width: 1300 mm Printing repeat: max 800 mm, min 350 mm max roll diameter: Unwinder: 1000 mm. Rewinder: 1000 mm. Drying System: electrical Ink type: solvent, Water base System: sleeved , Geared, Sleeve Width 1300 mm 35 - 5 pcs 38 - 6 pcs 40 - 6 pcs 45 - 6 pcs 48 - 4 - pcs 50 - 6 - pcs 55 - 6 - pcs 60 - 6 - pcs 66 - 4 pcs 69 - 5 pcs Anilox : 300 - 2 pcs , 220 - 2 pcs, 120 - 1 pcs, 100 - 1 pcs.
Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg
Miwe aero in-store oven Type: AERO AE 6.0604 digital Miwe FP 12 control for 6 sheets 60×40 cm with lower shelf with vapour destroyer Year of construction 2007 Specifications: 400V / 230V / 3/N/PE / 50Hz Electric Dimensions: Height: approx. 180 cm Width: approx. 90 cm Depth: approx. 100 cm Net price plus VAT ex warehouse
Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W
AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...
Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A
REF-1681 SACCARDO ARTURO CHOP CUTTER Completely made of stainless steel. Manufacturer: SACCARDO ARTURO Model: TITANIO 2. Max. cutting length: 1.070mm. Max. cutting section: 210x240mm. Cuts per minute: 90-180 Cutting thickness: 5-60mm Weight: 330 kg. Year: 2008 3kW Dimensions of the machine: 2,367mm x 832mm; h: 1,496mm
Material : areas in contact with the product in stainless steel Volume : 80 ltr. Drive : 10 KW Screw drive : 6,8 KW Operating temperature: 250°C Pressure inside : - 1 bar.
I am selling a Robot ABB IRB 6400R 2.8-150. Manufactured 2003-08-11 Including control pendant panel and full documentation. Total weight 2100kg. Fully operational. Little worked. Available the same.
Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes
Centrifugal pump of the ZLND series from the manufacturer STERLING SIHI
maximum number of results exceeded
please refine your search
