project a used for sale

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

ABB electric motor System: electric motor Condition: pre-owned Manufacturer: ABB Product code: 3GJP181410-ADG Year of construction: 2008 IP: 55 KW: 22 Speed: 2938/RPM HZ: 50 Weight: 200 kg

System: Used piston - diaphragm pump Manufacturer: Abel Type: HMD-G-20-0125 Year of construction: 2001 Series: HM Machine number: 5100074 Material: GG Capacity: 18 m m³/h Delivery pressure: 15 bar Speed: 131 U/min Temp: MAX 100 ° C Operating voltage: 380 V Frequency range: 50 Hz Motor: 11 kW Protection class: IP55 Flanges: DN 80 Dimensions: 1.70m L x 1.30m W x 1.60m H Miscellaneous: forced ventilation 230/400V, 0.11 kW

Oil drip pan 1080 litres Oil collecting tray with feet made according to RAL RG 616, content 1080 litre, material S235JRG2, painted,. Dimensions: Height 750 mm, length 1200 mm, Width: 1200 mm incl. test certificate Year 2012, unused

Weibert WJ-ASA Professional Extraction system Power of the motor: 4 KW Suction power: 3900 m, m³/h Chip bags: 2 x 200 l Dimensions 580 x L. B. 1300 x h 2200 mm Driving device Connector 2 x 120 mm WJ-ASA Professional Special price: NET 890,-

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

The blowers are fully incorporated into a soundproof cover with base frame, safety valve, check valve and mounting parts. The motor can be installed according to customer specifications. The stage will be overhauled on request.

M. No: 01/6675917

Attachment: eccentric screw pump used Manufacturer: Allweiler Series: AED 1E 4250 Year of construction: 2000 Working temp.: approx. 20 ° C Viscosity at tA: approx. 500 mpa.s Density at tA: approx. 1.0 kg / m³ Pressure in the pressure connection: 2-6 bar Speed: 62-310 1/min Flow rate: 30-180 m, m³/h Engine capacity: 45.0 kW

Agfa Aphis Board for new PCI. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Still in operation: No Available: Ja

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 MADE IN SWITZEWRLAND BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 MADE IN SWITZERLAND IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Machine: Chamber filter press Type: UM 1200 x 1200 Execution: filter press Filter plate format: 1200 x 1200 Year of construction: 1977 refurbished 2017 Number of plates: Filter plates: 43 in PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 1560 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Safety device: E.g. photocell etc. optionally on request Buy or rent: Visits of facilities in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

<br>Spinner for Agfa Avantra 44s, 20,000 RPM, refurbihed 2013, with warranty. We have all spareparts for Agfa Avantra 25/30/44, AccuSet... on stock. Don't hasitate to contact US.<br><br><br>

<br><br><br>Still in operation: Yes<br>Available: immediately

Plastic SV 28

Motor tube Notchers from ALMI AL1â2U Notching of gas -, steam -, stainless steel, non-ferrous, as well as numerous other pipes with heavy use, ALMI has developed a series of particularly efficient pipe Notchers with electric drive. Wherever ensure the Notcher ALMI extremely quickly and accurately for the correct tube recess where welded tubes at a 90 ° angle. They are suitable also for the production of double corner joints. The pipe Notchers with a 2.2 KW motor is equipped for intensive use. The engine forms a whole with special eccentric shaft, which drives the notching tool. The model AL1-2U also has a Notcher for zinc spout. The tube Notcher has a 0 voltage fuse, and a protection device. Properties High productivity Low investment costs Several diameter available immediately Ideal for double corner joints up to 5 mm wall thickness (for VA up to 4 ...

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort

AGFA Avantra 30 with short Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm. Available: now

6-color R25476/17 ALLIED GEAR label flexo printing machine model: Flexomaster age: 1995 available: immediately 6 colour 6 anilox rolls paper cutter laminator transporter power unit UV dryer Video mounting plate (JM Heaford) Still in operation: Yes Available: nach Absprache

CIRCULAR SAW Mod ALTENDORF F45 second hand machine CE mark . with Use and Maintenance Booklet and Declaration of Conformity digital display inclination blade digital display blade height digital display rpm blade double front / rear ignition control Technical data : anodized aluminum carriage mm. 3000 max. blade mm.400 blade group inclinable at 45° saw blade self-braking power motor Hp 7.5 telescopic aluminum pole suspended "bridge" protection on the blade cutting width on the parallel rail mm.1300 n.02 additional aluminum frames fixed table dimensions mm.1200x750 blade rotation speed g / min.3000 / 4000/5000/6000 net weight kgs. 1000 Volt. 380/50

AGFA AccuSet 800 in great condition with Agfa Viper Rip, Resolution: 1200, 1800 and 2400 dpi - System includes all componentes: Accuset, Supply- & Takeup-Cassette, Apis-Cable, CDs, Software and Dongle. Including Techkon Densitometer for film. Just send us a mail and you will get more info and photos Available: now

AGFA Motor for the cutter of SelectSet 5000. Including Belt. Available: now

Aboveground, double-walled stainless steel tanks used according to DIN 6616/2 for the storage of liquid fertilizer ASL/AHL - emptied, cleaned- incl. 2 saddle feet, 1 DOM, 1 leak detector-test report Size: 50.000 litres Diameter: 2,500 mm Length: 10,700 mm Weight: 9,200 kg The tank has a brand new, suitable for liquid fertilizer (ASL/AHL) plastic inner sleeve. This plastic sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL/ASL, as well as NOx reduction agent AUS 32 (AdBlue). Also, we can provide the container with an internal coating of epoxy resin. This coating is also approved for liquid fertilizer (ASL/AHL). In addition, the container if necessary is outside completely sand-blasted, primed and then painted in an any RAL color. The container can be equipped additionally w ...

AGFA Cutter for SelectSet 5000. Including Belt, Stillage and Knife. Available: now

AGFA Laser for SelectSet 5000 including PowerSupply. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

AGFA Laser for SelectSet 5000. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

Applikon cell cultures bio reactor system / fermentation system built in 2004 consisting of: 1 Applikon 130 liter bioreactor type PS 130 L in 316 L stainless steel electropolished -Product space 3 bar / vacuum -Jacket 6 bar / vacuum -Agitator Magnetgekoppelt, speed adjustable -Piping, heating, valves, filters, pumps, control cabinet, etc. -mounted on frame and wheels -cGMP standard 2. Applikon 30 liter bioreactor type PS 30 L in 316 L stainless steel electropolished -Product space 3 bar / vacuum -Jacket 6 bar / vacuum -Agitator Magnetgekoppelt, speed adjustable -Piping, heating, valves, filters, pumps, control cabinet, etc. -mounted on frame and wheels -cGMP standard 3. extensive documentation

Complete System - still in production - Avantra 44 with 3600 dpi - AgfaLine 44 - short Online Processor - Agfa PDF-Rip - Agfa PrintDrive Series 3 Available: after 10.07.2011

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

CIRCULAR SAW MARTIN T73 AUTOMATIC 3 CNC controlled axes CE regulation: YES volt. 380/50 n.3 AXES CONTROLLED by CNC 1. blade height 2. blades inclination 3. parallel guide Equipment: parallelogram cross carriage T 7335 adjustment gauge T 7339 n.02 digital lingitudinal stops T 7341 3-axis scoring unit electrically adjustable T 7323 squaring device "Besaumfix" T 7372 second support T 7368 Technical data : length of carriage mm. 3700 cutting width mm. 1350 with 3-axis electric engraver Cutting height max 170 Blades inclination: 0 ° - 46 ° main engine power Hp 7.5 (Kw 5.5) Blade max diameter 500 mm 3-speed motor. rpm. 2800/4000/5500 Weight 2000 kg

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Transport Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Supply-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Takeup-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Panel for Avantra25 - see all details in the picture. The Panel is out of a well working Avantra25. Available: on stock

Frequency converter Mitsubishi Freqrol A200, 15/18,5 KW - mint condition Manufacturer: Mitsubishi Electric Type: FR-240-E-15K-EC Technical data: 15/18,5 KW Input: 3PH AC380-415V 50/60Hz Output: AC380-415V, 0.2-400Hz, 15/18.5 KW 31/34A With manual, without control panel, if you need one, this can easily be purchased on Ebay. Attention! We have set the market lowest price for the part. We have more, but the amount is ending. We carry other frequency converters at very reasonable prices. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, was there for several years in the warehouse but was never in operation. We give you a functional guarantee for 6 months. Should the unit fail, we will replace it with a new one or refund the purchase price.

Laserset for ProSet9400 - see all details in the picture. The Lasers are out of a well working ProSet. Available: on stock

Powersupply for AccuSet - see all details in the picture. The Powersupply is tested and is out of a well working AccuSet. Available: on stock

Takeup-Cassette for all AccuSets - see all details in the picture. The Cassette is tested and is out of a well working AccuSet. Available: on stock

Screw 90 mm

Screw 120 mm

Working cylinder 253 mm

Output-Motor for AccuSet, the Motor is located before the TakeupCassette - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock

Supply-Cassette for all AccuSets - see all details in the picture. The Cassette is tested and is out of a well working AccuSet. Available: on stock

Supply-Motor for AccuSet, it is the complete unit for an easy change - see all details in the picture. The Motor is tested and is out of a well working AccuSet. Available: on stock