project a used for sale

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

Autostainer Link AS48 Agilent Dako https://www.agilent/en/product/autostainer-link-solution-for-ihc/autos tainer-link-48/autostainer-link-48-75845 - Process 48 slides in less than three hours. This means you can finish 96 slides in a normal working day with just one Autostainer Link 48 and one PT Link. - Gain up to 45 minutes of autonomy compared with our fastest Autostainer Plus - Make the most of your laboratory time by processing slides in parallel using PT Link and the fastest Autostainer Link 48 ever. - Have the freedom to set your own standards and the ability to control them VERY GOOD CONDITION Date of purchase: March 2014 Under annual maintenance contract PT Link DAKO tissue pre-treatment module https://www.agilent/en/product/pt-link-for-pre-treatment/pt-link-acces sories VERY GOOD CONDITION Date of purchase: March 2014

New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...

New shredder Brand: Reinbold Type: AZR 600 technical details: hopper opening: approx. 600 x 800 mm input height: approx. 1.640 mm hopper volume: approx. 0,6 m³ rotor working width: approx. 600 mm rotor diam.: 252 mm main motor power: 18,5 kW - 400 V - 50 Hz. - 3 Ph. hydraulic motor power: 0,75 kW - 400 V - 50 Hz. - 3 Ph. rotor speed: approx. 90 U/min tools: 15 pcs. round knives screen size: 40 mm connecting piece diam.: approx. 160 mm air speed: 28 m/s weight: approx. 1.300 kg

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 40 mm   external diameter max.: 150 mm   length min.: 260 mm   lenght max.: 1500 mm ELECTRICAL SPECIFICATIONS   total power consumption: 155 kW   mains power supply: 280 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007 Exclusions from supply (even if visible on photos)- without chip breaker - without laser marking system

Dough Divider And Rounder Fortuna Automat A 4 Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate Optionally with base (stationary or mobile)

Dough Divider And Rounder Fortuna Automat A 4 E Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Motorized tiltable head Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate

Dough Divider And Rounder Fortuna Automat A 4 Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate Optionally with base (stationary or mobile)

Dough Divider And Rounder Fortuna Automat A 4 Fully automatic dough divider and rounder Makes 30 dough pieces on one plate Dividing without rounding function Dough insertion: 1.200-3.300 g Weight of dough pieces: 40-110 g Incl. rounding plate Optionally with base (stationary or mobile)

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

description: High quality control unit for bottle conveyors for a huge part of a 50.000 bph filling line with several KHS control units for approx. 44 drives in a total. The KHS switchboards are air conditioned. The Danfoss inverters are overhauled and can be commissioned without concern. The software might be added as well. An andaptation to your project can be also offered. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or ...

Product number: 1948 Type: COO 1350x6000 Serial number: 3-000015705 Year of construction: 2015 Belt width: 1350 mm Tiers: 3 pcs .Belt speed: 2.4 - 18 m/min .Heating: thermal oi lCooking length: 1 or 3 x 6000 mm Power: 3 x 400V, 50Hz, 18.6kW Dimensions: 8100 x 2850 x 2900 mm Flexibility in tiers: 1 linear or 3 multi-tierWith With NOVAtech dew point measurement With Clean In Place system (CIP) Provisur / Marvu infeed belt Project number: 140347200 Type: 390 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Infeed height: 1200 mm Power: 3 x 400V, 50Hz, 1.1kW Dimensions: 2300 x 2100 x 1900 mm Weight: 700 kg Provisur / Marvu outfeedbelt Project number: 140347300 Type: 614 Serial number: 1 Year of construction: 2014 Belt width: 1350 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions; 2350 x 1700 x 1200 mm Weight: 330 kg Adjustable in height and lengt ...

description: Various second hand tray- and carton conveyors Krones/KHS/Gebo for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 140m used Tray-and carton conveyors (predominantly Krones,KHS, and Gebo, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger pr ...

description: Used Pallet infeed and outfeed for sale In our warehouse in Knetzgau we currently have stored on 2.200qm approx. 14 pallet infeed and outfeed (predominantly Krones,KHS, and Gebo, available immediately). When buying items we always pay attention on famous manufacturers an tough quality. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you  ...

GENERAL Project No.: 905610 Quantity: 1 pcs. Manufacturer: MÄGERLE Type: MGC Grinding Centre Control: Siemens 840 D solutionline Year of construction: 2020 Conservation status: Used machine Machine on approx. (hrs): 2.124 Program run approx. (hours): 155 Spindle on approx. (hrs): 214 DESCRIPTION GRINDING Travel in X 1300 mm Travel in Y 450 mm Travel in Z 350 mm Max. rapid traverse speed in X/Y/Z 20/10/10 m/min Max. distance table spindle center 850 mm Automatic balancing device Motor spindle Max. diameter x width x bore grinding wheel 500x160x203.2 mm Max. circumferential speed 63 m/s2 Max. speed 5000 1/min Max. power at ED 10-40/100% 50 kW Workpiece table with T-slots and 16-fold oil feed-through (shuttle table) 2x 760×325 mm Clamping hydraulics Hydrostatic guidance Forming roll dresser MT 200 D200 B167 OTHER EQUIPMENT Splash guard cladding wit ...

description: Vertical stroke of approx. 2000 mm incl. Vacuum pump and intermediate layer magazine for EURO and half pallets height: 3000 mm length: 1520 mm serial number: 2080467/017 width: 1120 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for o ...

Consecutive wrongly ordered / project change! 2 piece Complete agitator with lantern, 2-piece agitator shaft, mechanical seal, gear motor, 2 stirring organs, quench entry, quench outlet, but without Thermosiphon. Installation and operating instructions. Price/piece

max. workpiece length: 3200,5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: --------------------------------------------- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) , Y = 1500 mm, Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeu ...

1 KAPPA pinking machine type 105 S knife width 1040 mm, serration gauge 4 mm machine equipped with precise hand lever feed mechanism, with laser cut indicator, motor power 3 kW, 3 x 380 V, 50 Hz, Machine with setting for 2 pattern dimensions (normally supplied with 1 only), machine delivered with 2 new cutting boards (one to be used and one as spare), with installed cutting knife plus spare cutting knife Machine in pristine condition. It was bought for a project and was never really used. Delivered secured on it's wooden crate

Fully automatic storage system for containers – in excellent condition: Knapp Shuttle System OSR35 - installed 2016 Available from 2023, incl. 200 meters of conveyor technology, flow racks, Nerak lifts, picking stations Capacity: 7,000 containers 60x40x17cm, expandable up to 9,450 pieces. This OSR shuttle system from Knapp Fördertechnik could increase your performance enormously and reduce costs Performance: More than 500 picks/hour possible General information: The system has 2 aisles with a length of 23.5 meters (shelf length) for over 7,000 containers.An expansion up to 9,420 containers is possible. Additional information: Dimensions of the shuttle construction: Length: 32 m Dimensions of the shelf Length: 23.5 m Width: 7.5 m Height: 9.4 m Sizes of containers: Blue containers for picked goods: 60×40x35cm Green containers for storage: 60x40x ...

GENERAL Project No.: 905433 Quantity: 1 pcs. Manufacturer: TORNOS BECHLER Type: MultiDeco 20/6 Control: Tornos Bechler Fanuc PNC Deco Year of construction: 2001 Condition: Used machine Machine on approx. (hrs): 77,725 Layers approx.: 2-3 layers DESCRIPTION TURN 18 axes turning diameter 20 mm 6 pcs. main spindle(s) speed main spindle 6000 1/min power main spindle at ED 10-40/100% 15 kW ADDITIONAL EQUIPMENT Splash guard cladding with fully encapsulated working area Lighting in the workroom Preparation for central oil/emulsion mist extraction system Hinged belt chip conveyor MAYFRAN Consep 2000 Machine is/was operated with oil Coolant device Automatic CO2 fire extinguishing system Bar feeder/bar loading magazine ROBOBAR MSF 522/6 GENERAL TECHNICAL DATA Total power requirement 43 kVA Machine dimensions (LxWxH) approx. 3500x1600x1950 mm Machine wei ...

Technical data bale opener and dewiring line with weighing system Bale feeding belt, pos. 1: Belt length 11,000 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 7,000 kg Conveying speed 0.2 m/second Drive power 3 kW Pitch of idlers 250 mm Side wall height in feed area 70 mm Side wall height impact wall 1,000 mm Feed height 1,800 mm Industrial weighing system for the bale feeding belt (additional equipment): Weighing terminal type IT1 Ethernet 8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each Preload of the system 5,000 kg Feed belt to bale opener and dewirer, pos. 2: Belt length 9,500 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 6,000 kg Conveying speed 0.25 m/second Drive power 9 kW Pitch of idlers 250 mm Side wall height 800 mm Pitch 13 Bale opener and dewiring station, pos. 3: Type B/E 3213 Year of manufactur ...

Mobile front axle ramp, butt, 9m long, 10 tons, front side loading - second-hand - : Price ex location: now only 9.950.-€ instead of 14.500.-€ (net)! Manufacturer: Butt Type: BKV109 Year of construction: 2020 Load capacity 10000 Total length: 9,000mm Total width: 2,800mm Ride width: 2,400mm Height fixed at 1,000mm Axle load: 5.000kg Dead weight approx. 4,000 kg. RAL 7016 Hot-dip galvanized special anti-slip gratings The MOBILE FRONT AXLE RAMP has been adapted for a project and has been given a fixed height (it is not height-adjustable). It is therefore not suitable for loading and unloading standard trucks The support points are adapted to the fixed height and the slope at the place of use (see photos). Condition: very little used – like new! Available: now Location: 24558 Henstedt-Ulzburg

Air duct MWM 12307524 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

Air duct MWM 12307522 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

- Thrust washer axial disc MWM 12302273 - Suitable for several motors - Please note! Price per piece! - 12302273 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and inte ...

- Air guide housing air duct housing MWM 12141695 - Suitable for several motors - Please note! Price per piece! - 12141695 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapti ...

- Air guidance air duct MWM 12136627 - Suitable for several motors - Please note! Price per piece! - References -> 12131031 – 12136628 – 12306646 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new pro ...

- Air guidance air duct MWM 12131039 - Suitable for several motors - Please note! Price per piece! - References -> 12131070 – 12350043 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...

- Intake manifold air intake pipe MWM 12452139 - Suitable for several motors - Please note! Price per piece! - References -> 12452137 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constant ...

- Intake manifold air intake manifold MWM 12136619 - Suitable for several motors - Please note! Price per piece! - References -> 12136620 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By cons ...

- Air cleaner fastening MWM 12300402 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new tech ...

1 COATEMA UV-coating lamination line type SM31, year 2015, roller width 150 cm, HONLE device for UV coating, with MAHLO double sided scanner QMS Webpro-XS (O-frame) with measuring sensor/head for measurement of layer thickness The machine was bought new for a project which was not finalized and it has less than 200 working hours. Machine looks like an exhibition machine.

5-axis machining center UMC 750SS The machine comes from a stopped automotive project and has very few productive and operating hours. Producer: HAAS Manufactured in: 2018/19 Table diameter: 500 mm Maximum table load (evenly distributed): 300 kg Spindle drive power: 22.4 kW (30PS) Number of tools in the magazine: 40 + 1 Maximum spindle speed: 15000 1 / min X-axis travel length (mechanical feed): 762 mm Travel length Y-axis (mechanical feed): 508 mm Travel length Z-axis (mechanical feed): 508 mm SK 40 Fast feed: 30.5 m / min IKZ 1000PSI KSS fine filter Machine height: 2800 mm Machine length: 4270 mm Machine width: 2350 mm Machine weight: 6464 kg

Extraction and filter system, manufacturer: HÖCKER POLYTECHNIK, Type: MultiStar SL30/6-1576/43717A, Year of construction: 2015, Project no.: 477189, Filter area: 1,576.8 m², Dust class M, Product no.: 103874, Weight: 15,000 kg

Extraction and filter system, manufacturer: HÖCKER POLYTECHNIK, type: MultiStar SL30/6-1576/43717A, year of construction: 2015, project no.: 477189, filter area: 1,244.8 m², dust class M, product no.: 103854, weight: 12,300 kg

For sale: Bragernes aut. coreless rewinder, year 1981, web width 1000 mm, Unwind dia. 1000 mm. Can make rolls from 5 m up to outside dia. 50 mm With web guide and tension control. Available: Now

We have for sale: Manufacturer : Holweg Type : Roto Simplex 2 Bag length : 145 - 660 mm Bag width : 70 - 380 mm Speed : 800 bags/min. Year approx. 1965 Available: Now

For transport and storage of all types of beverages ex: bier, wine, juice, liquor, whiskey. For yoghurt, mustard, honey, cream for hands, etc. Also for pharma and chemical purpose. Material: Cone: 1.4301 IIID Jacket: 1.4301 IIID All other parts: 1.4301 IIIC Volume: 1000 litre Test pressure:+ 3,4 bar Max. allowable: Operating pressure:+2,0/-0,15 bar Operating temperature:130°C Dimensions: Height over all:1845 mm +/- 10 mm Diameter of container:1000 mm Diameter of reinforcing ring:1012 mm Weight: 126 kg Thickness: Top Bottom:2 mm Lid:3 mm Jacket:1,5 mm Cone:2 mm Outlet Tube:2mm Forklift Tunnel:3 mm Design and Equipment: stacking device - consisting of a stacking crown which is welded directly on the top bottom; Top Bottom: with a DN 400 cover system which is welded in the center of the top bottom; Cover System with a DN 400 lid which ...

200 kW, max. 10 bar, 32,7 m3/min.

110 kW, max. 8 bar, 15,5 m3/min.

132 kW, max. 7,5 bar, 22,74 m3/min.

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT.  ...

Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

Offer of a drive-in shelf with about 500 parking spaces. Max load per pallet approx. 800 kg More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error a ...