project a used for sale

Food conveying and processing equipment List of equipment : 1. Dewatering shaker (fabricated in Q4 2020) 2. Weight conveyor belt (fabricated in Q4 2020) 3. Dejuicing shaker (fabricated in Q4 2020) 4. Diagonal shaker (fabricated in Q4 2020) 5. Dryer feeding shaker (fabricated in Q4 2020) 6. Incline belt elevator (fabricated in 2021) 1. DEWATERING SHAKER Dimensions: Length: 3.300 mm Width: 900 mm Features: Fully built in stainless steel. Tray fully built-in stainless-steel plate, composed by: 1 Dewatering screens of 1.000x600mm Juice collecting level and canalisation outside the machine. Vibration by means of fibber springs working at high frequency. Reaction mass in 5 mm stainless steel plate. Isolation by means of rubber silent blocks. Chassis in stainless steel structural profile for the required working height. Powered by-mass motor-vibrators (OLI trademark). Supp ...

Food conveying and processing equipment LIST OF EQUIPMENT: 1.Incline auger conveyor (fabricated in Q4 2020) 2.Fruit declumper/breaker (fabricated in Q4 2020) 3.Metal detector shaker (metal detector head not included) (fabricated in Q4 2020) 4.Redler elevator (fabricated in Q4 2020) 5.Grading shaker with an additional set of screens (fabricated in Q4 2020) 6.Horizontal belt conveyor (fabricated in Q4 2020) 7.Redler elevator (fabricated in Q4 2020) 1. INCLINE AUGER CONVEYOR Dimensions: Length: 2.300 mm Width: 1.500 mm Features: Fully built in stainless steel. Accumulation hopper of 1 m3 capacity made of textured stainless steel. Cleaning window at the lower part of the hopper. Evacuation screw of 300 mm diameter built in stainless steel. Open upper side of the screw for cleaning. Draining valve for cleaning. Upper screens to avoid big frozen blocs. Safety protections.  ...

Self-priming screw spindle pump manufacturer from Allweiler Pump with free shaft end incl. electrical heating, 220 V standard coupling Intermediate lantern in GG, drive motor with PTC thermistor in special design Find more here - / Contact us at -

Keyence Agilista 3200. Yera 2017. Attached is a photo of the operating hours counter from January 19, 2013. In the meantime, around 100 hours of printing have been added. The device is technically in good condition. Find more here - / Contact us at -

Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - / Contact us at -

Makfil Andromeda 2001 + tool inserts Find more here - / Contact us at -

Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - / Contact us at -

Agilent Technologies Bravo G5522A NGS Workstation 1.1 NGS Benchtop Integrated WorkStation -Integration of plate management and liquid handling devices into a benchtop automation system. - VWorks Benchtop License: Included - VWorks Simulation License: Included Robot Disable Hub: included 1.2 Bravo Liquid Handler integrated to BenchCel with - 5 Standard Pads 2 CPAC Ultraflat heated/cooled Pad 1 Bravo Orbital Shaker - 1 Bravo Thermal Pad · Magnetic Bead Pad - PCR Plate Support 96 Well · CPAC PCR Plate Insert -Deck risers for Bravo -Thermocube Chiller 400W for Bravo Thermal Pad -Controller for CPAC Pad 1.3 Bravo Gripper Upgrade 1.4 96LT Disposable Tip Head 1.5 BenchCel 4Racks Microplate Handler - With 4 Front Loading Racks - BenchCel Risers 1.6 Labware MiniHub - Integrated with BenchCel Find more here - / Contact us at -

size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

Coil line with 4 tonne coiler incl. coil turner HS Automation Conveyor system with 4 tonne decoiler incl. coil turner type MS41OL, year of manufacture 2015 Technical data decoiler: Max. Coil weight: 4000 kg Standard strip width: 500 mm Spreading range: 450 - 550 mm Outer ring diameter max: 1900 mm Spreading process Decoiler drive: hydraulic, three-phase motor 400V 50 Hz Decoiling speed: 30 m/min Tape loop control: Pull-off via preset pressure or via loop control Coil stop arms: 6 pieces with quick clamping system Protective device: andes Reel structure and function The reel consists of a solid structure of electro-welded and machined elements. The expanding mandrel can unwind to the left and to the right. Spreading is performed hydraulically via operating elements from the control panel. The reel is equipped with a three-phase motor with which the reel crown can be wound an ...

2017 Andritz KMPT GmbH DCF312 / 16 / 4 Andritz - Dynamic membrane filtration Dynamic Crossflow Filter cpl. with control unit Model: DCF312 / 16 / 4 Manufacturer: Andritz KMPT GmbH Year of manufacture: 2017 Condition: As good as new Description: Crossflow processes are used to separate substances that are difficult to filter. In this process, rotating ceramic discs (alternatively: polymer) generate a turbulent differential velocity. With dynamic crossflow filtration, a high degree of separation can be realised, especially with a concentration of the retentate of up to 700 mPas. Ceramic filter discs are available on the market in a wide range of pore sizes from 7 nm to 2 μm. Areas of application: - Colour extraction (e.g. pigments) - Separation of biomass - e.g. in the extraction of enzymes, proteins, proteins, polysaccharides, antibiotics - Recovery of valuable substances -  ...

2019 Aerzen D52S Rotary piston compressor Find more here - / Contact us at -

Mitutoyo QUICK VISION ACTIVE 202 Optical measuring machine (Vision Measuring Machine) from the manufacturer Mitutoyo Specifications (See pictures) High efficiency No constant supervision is required. The operator can carry out other tasks. Minimisation of error sources Automatic edge detection The automatic edge detection function enables high reproducibility of measurements, regardless of the reproducibility of measurements. Image autofocus The image autofocus function enables reliable height measurements at high speed. Continuous measurement of multiple workpieces Grinding function With this function, a large number of workpieces positioned on the large number of workpieces positioned on the device are on the device in a single operation. Automatic measurement can be started after be started after rough positioning Pattern search The pattern search function automat ...

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...

1992 COMBINED CONCENTRATION SYSTEM Type: AFN 454 US The system was in operation for a maximum of 2 months per year. WITH AROMA RECOVERY, USED, REBUILT AND EXPANDED, IN ADDITION TO EQUIPPED WITH NEW COOLING TOWER CIRCUIT EVAPORATOR TYPE OPERATION Horizont TYPE HEAT EXCHANGE al, CONDENSATION AROMA 4-stage EXTRACTION with SYSTEM VERSION: WATER live steam EVAPORATION SYSTEM TYPE > NEW preheating, recovery, cooling mixed condensation semi-barometric rectification - tray column especially for the juice industry 4 840 Kg/h AFN 454 U-S Technical data: 1-stage dearomatization and concentration, combined operating mode SYSTEM TYPE: AFN 454 U-S PRODUCT: Apple juice, cloudy Input quantity 6 600kg/h Input dry matter 12,0% Input temperature 15 ·c Water evaporation 4 840 kg/h Initial quantity 1 760 kg/h Starting dry matter 45 % Starting temperature approx. 18 ·c Aroma  ...

1996 Theissen and Bonnitz TB 314 QSM 65 Collating machine Hersteller (Manufacturer): Theisen & Bonitz GmbH, Burscheid, Germany Masch.-Typ (Machine Type): TB 314 QSM 65 Baujahr (Year of Manufacture): 1998 U (Voltage): 3~PE 400 V, 50 Hz P (Power): 1.9 kW Find more here - / Contact us at -

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

max. wheel diameter:600 mm max. module:6 weight of the machine ca.:0,9 t dimensions of the machine ca.:1,52 x 0,91 x 1,45 m

Out of valve production

turning diameter:150 mm

weight of the machine ca.:2,5 t spindle passage:65 mm

Venus Bliss is a non‐invasive lipolysis machine. It employs 4 diode laser applicators to reduce fat via lipolysis, and an (MP)2 applicator that combines Multi-Polar Radio Frequency and Pulsed Electro Magnetic Fields with advanced VariPulse™ technology to reduce cellulite around the abdomen, buttocks, and thighs for a smoother, more contoured appearance and it boosts the lymphatic circulation. Find more here - / Contact us at -

feed pressure:8 bar :9 m³/min Number of working hours:18671 h voltage:380 - 415 V total power requirement:58,5 kW weight of the machine ca.:1300 kg dimensions of the machine ca.:2000 x 1100 x 1700 mm

feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20

AFS Corona Pre-Treatment system Type (Typ): G 60 M Input (Eingang): - Voltage (V): 400 - Current (A): 16 - Frequency (Hz): 50/60 Output (Ausgang): - Power (W): 6000 Technical Data Roller Width: 2700 mm Electrode Width: 2500 mm Maximum Mechanical Speed: 250 m/min Maximum Generator Power: 6 kW / 1 & 5 Core Operation Electrode Type: Ceramic Electrodes Discharge Roller: Ceramic Roller Drive Type: Driven Discharge Roller Cooling Type: Water-cooled Pre-treatment Direction: Controllable via web path Pressure Rollers: Present on both sides Find more here - / Contact us at -

feed pressure:8 bar :Verd. 5050 min /1 voltage:400 V rated current:90 A total power requirement:46,5 kW weight of the machine ca.:1320 t dimensions of the machine ca.:1800 x 1600 x 2300 mm frequency:50 Hz Effizienz::7,4 m3/min IP::54 / 20

Aerosol Jet Printer Model - AJ300CE The Optomec AJ300CE Aerosol Jet Printer, introduced around 2011, is an additive manufacturing system designed for high-resolution, non-contact printing of electronic and biological materials onto various substrates, including non-planar surfaces. It utilizes Aerosol Jet technology to deposit fine-feature patterns with feature sizes as small as 10 micrometers. Key Features: - High Precision Printing: Capable of producing feature sizes down to 10 µm, enabling the creation of intricate patterns necessary for advanced electronic components. - Versatile Material Compatibility: Supports a wide range of materials, including conductive, resistive, and dielectric inks, with viscosities ranging from 1 to 1000 cP. - Non-Contact, Conformal Printing: The non-contact deposition process allows for printing on complex, three-dimensional surfaces without damagin ...

length:610 mm width:500 mm height:1800 mm weight - pallet system:30 kg

Manufacturer : Alexanderwerk Model : WP150x120V Condition : Used The Alexanderwerk WP150x120V is a roller compactor used primarily for dry compaction and granulation processes, often in industries like pharmaceuticals and chemicals. Find more here - / Contact us at -

cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden

table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

diameter:210 mm weight of the machine ca.:0,05 t turning speeds:4200 Bore:75 mm clamping diameter:254 mm dimensions of the machine ca.:0,6 x 0,5 x 0,4 m 2-jaw power operating chuck with draw pipe and various jaw sets.

R02 spot welding cell A. ABB Robots - Type: IRB6640-180/2.55 - RobotWare Version: 5.14.2039.02 - External Axis ABB: No - Year of Fabrication: 2010 - Operation Hours: 68,685 hours (both robots) Equipped with standard industry communication protocols suitable for integration with existing automation systems B. Expert Tuenkers Turntable - Type: EXD960/0045/2 - Gearmotor Type: KHF87 DRS112 M8/4 BE5 HR/TF C. Albany Door Find more here - / Contact us at -

Manufacturer: ALPA Model : RT 2100 Type of machine : surface grinding machine Year of manufacture : 1997 - Max workpiece width: 600 mm - Max workpiece length: 2100 mm - Magnetic table: 2000 x 400 mm Equipped with: - Wheel dresser - Electronic control unit Mod. MT 2000/R - Electrospindle for conical grinding - Electronic plate from Tecnomagnete - Coolant tank Find more here - / Contact us at -

Manufacturer: Alfa Laval Model : DX 4555 Condition: used Year of Manufacture: 1996 Operating hours : 4,400 The machine is equipped with a high-quality screw coating made of tungsten carbide tiles. The on-site control panel and control cabinet belonging to the machine are still available and could be used further. A frequency converter matching the machine is also included. Shortly before it was taken out of service in 2014, the decanter was equipped with new tiles, so the level of wear should be relatively low Find more here - / Contact us at -

- Type: Aqua Mammut ( Parts Washing System ) - System Type: Front Loader --------------------------------------------------------------- Specifications: - Empty Weight: 1,700 kg - Load Capacity: 700 kg - Dimensions (Closed): 2,150 x 2,700 x 1,850 mm (H x W x D) - Dimensions (Open): 2,150 x 2,700 x 2,950 mm (H x W x D) - Basket Size: 1,000 x 1,500 mm - Usable Height: 350 mm - Maximum Filling Quantity: 175 l - Performance: 2 x 7.5 kW (3 x 400 V/50 Hz) - Maximum Operating Temperature: 75°C Find more here - / Contact us at -

Erodiermaschine, gebraucht Baujahr: 1989 Bitte kontaktieren Sie uns für weitere Informationen und Bilder über mail(at)tar-mc.com oder www.tar-mc.com

material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t

material width:350 mm coil weight:2,0 t coil internal diameter:470 - 530 mm coil external diameter:1500 mm power requirement:1,0 kW weight:1,5 t dimensions (WxDxH):1,3 x 1,6 x 1,9 m

material width:600 mm material thickness: - 4,0 mm no. of straightening rolls:21 straightening roll diameter:30 mm material cross-cut:1800 mm² speed:6 - 36 m/min Power capacity:4,5 kW Weight:2,0 t Dimensions (WxDxH):1,5 x 2,0 x 1,9 m

Aircooled chiller/Heat pump SYSTEMAIR AQR290-H050.PROTO 46/54kW Cooling capacity: 46 kW / 13 tons (12/7 — 35°C) Heating capacity: 54kW / 15,3 tons (40/45 —7°C) Year of manufacture: 2023 Options; Heat pump Heat exchanger: Plate Refrigerant circuit: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Type of refrigerant: R290 Number of fans: 1 pcs. Dimensions: 2.25x1.1x1.75 m Weight: 507 kg Working hours: 0/0 h. Condition: outlet: new

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Railing Cone 90 ° Drawing available Rotary valve

60 cbm Aluminum Silo Manufacturer: Zeppelin Bulk density 0.6 Diameter 2.40 m Height without railing 15.50 m Cone 90 ° Ladder Railing Filter Rotary valve Drawing available