profile used for sale

Offer 26008 Technical data: - 3 mot. driven rollers with asymmetrically hydr. Feeding of the two lower rollers - bends e.g. flat bars 100x40 flat up to Ø 600 mm - bends e.g. flat bars 100x20 upright up to Ø 800 mm - bends e.g. U 180x70 up to Ø 800 mm - Shaft diameter per 100 mm - Useful length of the standard shafts approx. 250 mm - Shaft rotation 5.4 rpm - Roller diameter 315 mm - Drive 400 V / 11 kW - With: - Separate control panel with digital actual value displays - Lateral straightening rollers manually adjustable - Standard bending kit for flat and angle material - Weight approx. 3500 kg - Space requirement approx. W 1600 x H 1700 x D 1600 mm

CNC surface and profile grinding machine Control: DGT-Plus, Siemens Working area: Max. grinding length with table true running 1100 mm Max. grinding width 550 mm Grinding height (table-bottom edge grinding disc) 450 mm Table clamping area 1000 x 500 mm Table-speed 1/40 m/min Table load (without magnetic plate) 1200 Kg Table load (with magnetic plate) 975 Kg Grinding spindle: Three-phase current motor spindle 11 kW Grinding disc (outside x width x bore) 406 x 152.4 x 100 mm Revolutions 1400 Longitudinal axis (z-axis): Rapid movement 5 m/min Adjustable feed 1/50 mm Step-less adjustable feed 0/2000 mm/min Min. delivery 0.001 mm Working area 500 mm Total stroke 645 mm Vertical axis (Y-axis): Rapid movement 1.5 m/min Min. delivery 0.001 mm Working area 610 mm Total stroke 645 mm Space requirement: L x W x H 4450 x 2935 x 2540 mm Total weight: about 6700 ...

BPR BA 35 Asymmetrical CNC tube and profile bending machine with 3 driven rolls Factory REMANUFACTURED, RETROFITTED and UPGRADED in 2020. AS-NEW CONDITION MACHINE ! Contact: info@roce.hr / roce.strojevi@gmail.com Reason for Sale: Very low operating hours. Stored for years as a properly packed backup machine. In 2020, it was sent to the original manufacturer for full factory refurbishment and modernization (although fully functional at the time). After refurbishment, it was again kept in storage as a reserve unit. Now sold only because it is no longer needed as backup capacity. Excellent condition. Ready for immediate use. Description: This CNC-controlled profile bending machine is designed for complex bending operations with continuous radius variation. It allows choice between automatic and manual operating cycles, providing flexibility for different produc ...

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Technical data: Useful working width 480 mm Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...

Key data: 100 mm, 160 mm, 115 mm

Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Max. workpiece height 100mm Max. workpiece width 1000mm Min. workpiece width 500mm Top unit 6 brushes Top/bottom adjustable unit Helicopter rotating system 2 types of brush rotation speeds Smooth adjustment of belt feed speed Belt feed 1.5kW 4kW motor Diameter of the exhaust port 180mm, 200mm

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

With automatic feed length 4500mm Auction-ID: A1-44302-5

A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible.

With automatic feed length 4500mm Auction-ID: A1-44302-3

Inv. Num. : 9032 Type: Mec3000 Producer: Simec Created: 2019 Parameters: Switch-on hours: 9365 h Input length of the material: 6000–7000 mm. Parting diameter: 12–100 mm. Output length: 50–2000 mm.

Sale with the following accessories: 1x Colour foil frame No warranty on burners and bulbs. All headlights have been tested and are in working order. However, it may be that bulbs are missing, break during shipping or transport. We assume neither guarantee nor liability for this. Auction-ID: A7-45172-30

Sale with the following accessories: 1x Colour foil frame No warranty on burners and bulbs. All headlights have been tested and are in working order. However, it may be that bulbs are missing, break during shipping or transport. We assume neither guarantee nor liability for this. Auction-ID: A7-45172-29

Horizontal and vertical Horizontal and Vertical Axis Ø 85 mm Number of rolls 3 Stroke X-axis 200 mm Moment of resistance 37 CM³ Capacity Down 80 x 15 x R = 800 mm Tube capacity 76 x 3.6 x R = 600 Ø x mm Capacity solid 45 x 45 x R = 600 mm T-profile capacity 8-0 x 8-0 x R = 800 mm Working speed 0 - 7000 mm/min. Auction-ID: A1-44905-182

Sold as a set of 2 pieces and the following accessories: per set: 2x color filter frame 2x Gobo Holder 5x Replacement bulbs HPL 750W 8x Replacement bulbs HPL 575W Incl. Safeties No warranty on burners and bulbs. All headlights have been tested and are in working order. However, it may be that bulbs are missing, break during shipping or transport. We assume neither guarantee nor liability for this. Auction-ID: A7-45172-76

Sale with the following accessories: 1x Colour foil frame No warranty on burners and bulbs. All headlights have been tested and are in working order. However, it may be that bulbs are missing, break during shipping or transport. We assume neither guarantee nor liability for this. Auction-ID: A7-45172-31

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Dimensions: 665/540 / H375 mm -Weight: 30 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -Dimensions: 1300/780/H620 mm -Weight: 260 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears, punching and notching machine -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Pressure force: 60 to -Applications: punching, shearing, cutting, notching -Punching: Throat depth 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140mm -Weight: 1283 kg

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24800 € : 476.16 € : 60 to : 500 mm : 5 : 2 : 40x11 mm : 32 1/min : 350x10 mm : 120x10 mm : 45/40 mm : 100x10 mm : 150x10 mm : 5.5 kW : 2100 mm : 1400 mm : 2060 mm : 1750 kg 5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: De Stefani, Type: MVT 3500, Year: 2008, Monting of the machine: 3 X Profilschleifen, Program: yes, Axis control: no, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 80, Work piece length min-max mm: 250, Sanding hight mm: 80, Schleifaggregate rechts : 3, Abrasive belts at top: 3, Monting of the machine: 3 X Profilschleifen, Chain width mm: yes, Monting of the machine: ca.1,5, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,5, Unit 9 slewable: 3, Shoes electr. controlled: yes, Constant table hight: yes, Machine length: ca.4000, Year :2008

Continue spiraalschroefmachine voor de productie van industriële schroeven. Spiraalvormige schoepen worden gevormd door een metalen strip onder druk door conische rollen te leiden. Maximale strookbreedte: 200 mm Maximale stripdikte: 11 mm spiraalrichting naar links of naar rechts optimale rolsnelheid: 80 tpm Spoelcapaciteit: 5 ton Gewicht van de machine: 12 ton vermogen: 75 pk Inclusief rolslijphulpstuk: hiermee kunnen de conische rollen opnieuw geslepen worden zonder ze uit de machine te hoeven verwijderen. Inclusief hydraulische guillotines: geschikt voor het doorsnijden van alle soorten vleugels. Standaard steek: de buitendiameter is gelijk aan de steekmaat. Korte spoed: de spoed is kleiner dan de buitendiameter. Lange spoed: de spoed is groter dan de buitendiameter. Lintvlucht: vergrote binnendiameter door gebruik van smal basismateriaal. Komvormige vliegwiel: het vliegwielblad staa ...

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

equipment tested and working , sign of use are present Auction-ID: A7-45223-10

: neu : ca. 8 Wochen ab Auftragse : Spanien : 30800 € : 588.28 € : 85 to : 300 mm : 5 : 40/15 bzw. 24x24 mm : 450x15 / 450x18 mm : 475 mm : 130x130x13 mm : 45/40 mm : 12 mm : 200x12 mm : 9.2 kW : 2300 mm : 1200 mm : 2100 mm : 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 36000 € : 687.6 € : 85 to : 500 mm : 5 : 40/15 bzw. 24x24 mm : 450x15 / 450x18 mm : 475 mm : 130x130x13 mm : 45/40 mm : 12 mm : 200x12 mm : 9.2 kW : 2300 mm : 1200 mm : 2100 mm : 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting hydraulic downhold for flat- and angle station triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipped with many extra rollers; approx. 1500kg. Auction-ID: A1-41991-74

X stroke: 6500 mm Y stroke: ~1000 mm Z stroke: ~600 mm Power: 25 kW Power supply: 400 V / 50 Hz Automatic tool magazine Spindle speed: up to 18,000 rpm Machine for processing aluminium profiles Auction-ID: A1-44765-208

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-1

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-6

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-3

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-8

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-4

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-2

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-5

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-7

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). Auction-ID: A1-43751-9