profile used for sale

Brass round profile, round rod PAGUS Ø 20 mm Length: 3000 mm Weight: 8.0 kg New ! Dimensions: 3000 x 20 x 20 mm

Stainless steel round profile, round bar PAGUS Material: 1.4301 / 1.4307 Ø 80 mm Length: 430 mm Weight: approx. 17.5 kg New ! Dimensions: 430 x 80 x 80 mm

Profile steel shears, hand lever scissors HENRY PELS HS 7 Knife length: 260 mm Mounted on table used, tested ! Dimensions: 1350 x 650 x 1200 mm

Profile cylinders, compact cylinders, pneumatic cylinders, double-acting SMC CP95SDB32-50 piston diameter: Ø 32 mm stroke: 50 mm rod diameter: Ø 12 mm rod thread ( inner ): M10 x 1,25, length: 20 mm max. 1.0 MPa ( 10 bar ) New ! Dimensions: 197 x 46 x 46 mm

Profile cylinders, compact cylinders, pneumatic cylinders, double-acting SMC CP95SDB32-500 piston diameter: Ø 32 mm stroke: 500 mm rod diameter: Ø 12 mm rod thread ( inner ): M10 x 1,25, length: 20 mm max. 1.0 MPa ( 10 bar ) New ! Dimensions: 645 x 46 x 46 mm

: 35 mm : 35 mm bar material dia. max.: 70 x 2 mm rectangle: 60 x 60 x 3 mm flat steel: 60 x 10 mm Axis diameter: 50 mm diameter - cutter standard: 115 mm work speed: 9,0 U/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,66 x 0,9 x 1,35 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Timing belt wheel with safety hub PAGUS profile: L Teeth: 18 pitch: 9,525 mm diameter: Ø 54 mm belt width: 52 mm safety hub for shaft diameter: Ø 22 mm shaft length: 72 mm groove width: 6 mm including 20 shear pins and bushings New ! Dimensions: 60 x 60 x 72 mm

Timing belt wheel with safety hub PAGUS profile: L Teeth: 18 pitch: 9,525 mm diameter: Ø 54 mm belt width: 52 mm safety hub for shaft diameter: Ø 22 mm shaft length: 72 mm groove width: 6 mm including 15 shear pins and bushings used, tested ! Dimensions: 60 x 60 x 72 mm

Edge protection profile WÜRTH 0961 0025 Clamping range: 1 - 2 mm Cross-section (width x height): 6,6,5 x 9.5 mm outer diameter: 54.5 mm Number of rollers: 20 Roll length: 10 m Material: PVC, with metal insert Color: black Other quantities on request ! New ! Dimensions ( single roll ): 260 x 260 x 40 mm Dimensions ( packaging ): 900 x 800 x 300 mm

Profile steel scissors, hand lever scissors SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm throughout: 10 mm mobile ! used, checked ! Dimensions: 1300 x 700 x 1600 mm

The scope of delivery includes: 01x Rectangular tube, used Profile dimensions: approx. 50 x 30 mm Material color: orange Total length: approx. 3,660 mm Center-center hole: approx. 3,630 mm Material thickness: approx. 1.50 mm Number of boreholes: 2 pcs. Drill holeØ: approx. 10 mm Weight / pcs.: 6,150 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Offer 23278 Specifications: - Sheet metal and flat steel shears, knife length 175 mm - cuts flat steel up to 50 x 15 mm - or up to 140 x 8 mm - Profile - steel bar shears - cuts - angle steel up to 80 x 8 mm - Round steel up to 28 mm - Square steel up to 25 mm - Hole punch - punching force 275 KN - Stroke 24 mm - Projection 155 mm - perforated in steel up to 20 Ø in 10 mm - or up to 27 Ø in 6.5 mm - Drive 400 V / 3 kW - Space requirement approx. W 500 x H 1500 x D 855 mm - Weight approx. 450 kg - various punches + matrices

Stock Number: 3819 Profile Steel Shears - Hole Punching Machine Manufacturer: MUBEA, Type: KBLH 550 Machine NO.: 0157887125599, Year of manufacture: 0 Specifications: Gr. Druckl 50 To Max. hole punching dia. 30 x 15 mm Stroke length 0-60 mm Projection 410 mm Flat steel 400 x 10 / 180 x 20 mm Angle steel 50 mm Length: 1400 mm, Height: 1800 mm, Width: 800 mm, Weight: 1800 kg

Key data: 80 mm, 80 mm, 80 mm

Profile bending roll shafts output 80 mm brand Sergi Italy model PP type SER80CI year 2001 machine reversible can work with vertical shafts/horizontal shafts electric power 10Hp on the hydraulic centralized unit voltage 380 /50 -output shafts 80 mm -rollers diameter 250 mm -rollers interchangeable in 3 pieces each shaft to seat and copy the different shape of profiles -Powered driven the 3 shafts dragging with hydraulic motor and planetary gear-unit -Dual rolling speed fast/slow. -Rollers gap adjustable with front head screw modern system. -Pinching pyramid configuration each shaft individual move hydraulic. -Lateral correctors / straighteners left and right side with double contrast rollers. -Centralized control panel movable on wheels with all electric commands. -Digital position readout with position memory setting of the pinching rollers -Safety devices in com ...

profile bending roll model Femar PF22 year 1985 machine in working condition refurbished mechanical operated motorized electric pinch roll pyramid mechanical operated gear unit motorized electric rolls rotation position bending readout gauge adjustable rollers height to seat and bend the different shape of profiles Capacity ( see chart in enclosed ) angle 120 x13 mm flat bar on edge 120x30 mm flat iron 140x45 mm square iron bar 70 x70 mm T-section 100 mm C-section 160 mm IPE beam 160 mm dimension 2170 x1650 x H 1200 mm 8 ton

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Manufacturer: Tagliabue, Type: PS 40 60, Year: 2001, Control: Siemens, Control: Siemens, Work piece width min-max mm: 20-350, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 450, Sanding hight mm: 60, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Profile sanding units: 3, Unit 1 tiltable: yes, Aggregat 1 kW: ca.1,2, Unit 2 slewable: yes, Aggregat 2 kW: 1,2, Unit 3 slewable: yes, Aggregat 3 kW: ca.1,2, Unit 4 slewable: yes, Aggregat 4 kW: ca 1,2, Unit 5 slewable: yes, Aggregat 5 kW: ca.1,2, Unit 6 slewable: yes, Aggregat 6 kW: 1,2, Number of frequency controlt belts: 5, Sanding belt speeds m/min: 5-15, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 2, FREE TEXT: Maschinenbett rechts verfährt auf breite der Werkstücke, Year :2001

Manufacturer: Arminius Fräs und Kantenschleifmaschine, Type: SP 12, Program: yes, Axis control: no, Work piece width min-max mm: 60-500, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 100, Sanding hight mm: 120, Surface sanding units: 1, Profile sanding units: 2, Phase units: 2, Monting of the machine: Fräsen/Schleifen von oben/gerade schleifen/Phase/Phase/Bürste/Bürste, Unit 1 tiltable: yes, Unit 1 Kw: 2,2, Unit 2 slewable: no, Unit 2 Kw: 2,2, Unit 3 slewable: no, Unit 3 Kw: ca.2,0, Unit 4 slewable: yes, Unit 4 Kw: ca 1,0, Unit 5 slewable: yes, Unit 5 Kw: ca. 1,0, Unit 6 slewable: Bürste, Unit 6 Kw: Bürste, Shoes electr. controlled: yes, Constant table hight: yes,

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

Profile Width (Max): 235 mm // Output Capacity: 100 kg/h

Profile milling machine Guillet OFP Shaft 40 mm with glazing bead cutter Table 1200 - 750 mm Extraction 120 mm, Lateral extension from 2200 mm Auto. Defective positioning Engine Brake The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Curved bearing (curved track bearing), profile rail -Y3N 215 -Rail length: approx. 840 mm -Rail width: 35 mm -Number: available several times

Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 KM 35 -Number: 1x milling unit available -Price per piece -Dimensions: 510/430 / H570 mm -Weight: 62 kg

Profile bender, bender, angle bender, tube bender, ring bender -Manufacturer: self-made -Motor: 0.25 kW/20 rpm -Rollers: Ø 177/116 x 70 mm -Roller spacing: 145mm -Dimensions: 660/510/H1670 mm -Weight: 186 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Spare roles -Outer diameter: 200 mm -for: 35 mm pipe -Bore: 49 mm -Dimension: Ø 200 x 81 mm -Weight: 11 kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copier -Number: 1x grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Sanding head in thickness: adjustable -Max. Workpiece thickness: mm -Max. Corner radius: mm -Dimensions: 1200/1420/H1520 mm -Weight: 656 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Replacement rollers -Tool for: Ø 35 mm pipe -Outside: Ø 200 mm -Bore: 49mm -Quantity: 4 rolls available -Price: complete -Weight: 44kg

Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Elumatec SBZ 130 aluminium CNC machining center Number of axis : 3 Length 7300 mm Machine is in good condition For more info : https://www.elumatec/en/alphabetic-product/sbz-130-profile-machining-c entre

DMS 90 CNC M3 Tube and Profile Bending Machine Max. Tube Outside Diameter: Ø90 mm Max. Wall Thickness: 4 mm Max.Bending Radius: 300 mm 6 meter pipe loading capacity Pipe cutting system STEP IGES drawing program Rolling system Many tools are included More details: https://doganermak/detay/dms-90-cnc-m3-PR52

Sealing ring, comb-profiled, comb profile gasket SIEMENS B 214x324 0080250216 Seal thickness: 5 mm diameter ( outside / inside ): Ø 324 / 214 mm Material: Carrier material: stainless steel, support: graphite New ! Dimensions ( packaging ): 350 x 350 x 10 mm

Sealing ring, comb-profiled, comb profile gasket SIEMENS A 350x375, 7x4 3-802502-167 Seal thickness: 5 mm diameter ( outside / inside ): Ø 375 / 350 mm Material: Carrier material: stainless steel, overlay: graphite New ! Dimensions (packaging): 400 x 400 x 10 mm

Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm

SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)

Profile ring bending machine Make O.L.B. Machinery Type RBM 3/60 SA Year of construction 2015 Shaft ø 60 mm max. bending roller ø 215 mm Bending capacity max. - square 50 x 50 mm Bending capacity max. - flat 80 x 15 or 120 x 25 mm Bending performance max. - angle 70 x 70 x 7 mm Bending capacity max. - round ø 50 mm Bending capacity max. - round ø 100 x 2 mm Number of driven shafts 3 Total power requirement 2.6 kW Machine weight approx. 1.2 t Dimensions of the machine L x W x H 1.2 x 0.85 x 1.53 m - all 3 shafts driven - Absolutely new condition Accessories 3 sets of bending rollers

Description: Cuts the 6m PVC profiles, then manually inserts the steel reinforcement into them, the machine then screws them in, drills holes for decompression, hinges and mounting, and mills the drainage grooves. It is programmed for Profine profiles -Trocal 76AD, 76MD, 88MD. It can be reprogrammed to any profile. The total dimension of the folded machine is 17x9,2 m. About a year ago dismantled by Elumatec and stored. Everything should be functional. Video before disassembly attached. Requires 2 trucks with a loading area of at least 12m for transport. And one 8m. , It's not heavy in weight,but there are a lot of tables that can't be put on top of each other. weight approx.: 14,300 kg, Approx. Onsite Dimension. (l x w x h): 32,000 x 2,200 x 2,300 mm

Hydr. comb. Sectional steel shears with hole punch Specifications: - Flat steel shears: - Knife length 420 mm - Cutting capacity, flat up to 400 x 18 mm - Profile steel bar shears: - Angle steel 120 x 10 mm - Square steel / round steel 30 / 32 mm - Notching device: - Sheets up to 13 mm - Latch width / latch depth 52 / 70 mm - Hole punch: - Punching force 800 KN - Projection 250 mm - Punches in steel up to e.g. 31 mm Ø in 18 mm or 25 mm Ø in 20 mm - E. footswitch - Drive 400 V / 4.0 kW - Space requirement approx. W 600 x H 1700 x D 980 mm - Weight approx. 1200 kg -with: - E. footswitch - E. Stroke - Various punches with die - Stop support table - Separate tool cabinet

Edge sanding belt KS10: Yes; Chamfer and radius milling unit: Yes; Profile Grinding Wheel Unit: Yes; Machine Length: Machine Width: Weight: 800kg;

Description: Flat steel scissors: Knife length: 220 mm Sheets up to: 11 mm Flat steel up to: 120 x 13 mm Profile steel scissors: Angle iron up to: 80 x 8 mm T-iron up to: 80 x 8 mm U and I steel up to: 120 mm Number of strokes: approx. 55 / min. Steel bar shears: Round steel up to: 32 mm Square steel up to: 30 mm Notcher: Sheets up to: 10 mm Latch width up to: 40 mm Latch depth up to: 80 mm Hole punch: Punching capacity: approx. 35 t = 25 Ø x 11 mm / 20 Ø x 13 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 1,800 mm, weight approx.: 900 kg

Profile milling cutters D = 125 x 50 x 30mm HS G&-5071-M36lJ

ES4019, M75, 1999, 20 - 80 kg/h,

Technical Data: Length: 620 mm Height: 500 mm Width: 380 mm

Specifications: Length: 490 mm Height: 800 mm Width: 400 mm

Technical data: with T-slots Length: 1215 mm Height: 1600 mm Depth: 1000 mm

Technical data: with T-slots Length: 1215 mm Height: 1600 mm Depth: 1000 mm

Scissors: for flat steel: 80 x 10 mm Shear: For L & t 90 / 45 ° 70 x 70 x 7/50 x 50 x 6 mm Rod steel scissors around until: 28 mm square up: 25 mm Notching device for material thickness up to: 7 mm Drive motor: 380 V, 1.3 kW Weight: 400 kg Space: 1000 x 650 x 1480 mm

-high speed Nut- und Feder-Profiliermaschine -Arbeitsbreite 40 - 250 mm -Werkstückdicke 10 - 35 mm -min. Werkstücklänge 270 mm -max. Werkstücklänge unbegrenzt -max. Vorschubgeschwindigkeit 90 m/min. -Vorschubgeschwindigkeit über Frequenzumformer stufenlos regelbar -Schnittgeschwindigkeit 24 m/min. -Motor Fräse 2 x 7,5 kW -Drehzahl Fräse 7500 U/min -Motor Vorschub 0,75 kW -Steuerspannung 24 V -Spannung 400 V / 50 Hz -Gesamtanschluss 16,1 kW -pneumatische Spanner von oben und seitlich -Spindel FI 40 mm -inkl. Wendeplatten Werkzeuge -Steuerung manuell / automatisch -PLC Steuerung mit Touch-Screen für einfache Bedienung -Druckluftanschluss 8 bar -inkl. 3,5 m motorisch angetriebene Einlaufrollenbahn -inkl. 2,2 m Auslaufrollenbahn -Abmessungen L=1500, B=1220, H=1300 mm -Gewicht 1050 kg

Maximum punching force: 1100 kN Maximum shear force: 1700 kN punch ing: 510 mm support table hole 31 in 25 mm flat steel: 500 x 22 mm hydraulic holder for the flat steel knife kago n weight: approx. 5000 kg ; Very good

see data sheet available under electricity immediately

rotorwidth: 300mm rotorØ: 450mm feed hopper: 250mm x 280mm rotor knives: 9 bed knives: 2; ready for operation