profile used for sale

We offer you a collision protection guardrail here for purchase. Included in delivery are: 01x Collision protection guardrail, used Total length: approx. 2,530 mm Clear width: approx. 2,350 mm Total height: approx. 600 mm Total depth: approx. 90 mm Consisting of: 01x CS-Sigma profile, used Material colour: sendz. galvanized Profile abbreviation: C: 300 x 75 x 2 mm Clear width: approx. 2,300 mm 02x posts, used Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded screw-on plates: approx. 200 x 100 mm Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried fro ...

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 800 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 800 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 800 mm Surface: coate ...

Workbench width: 2,980 mm / Height: 938 - 946 mm / Workbench depth: 1,000 mm We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Included in delivery are: 02x workbench stand, used Material color: blue Frame profile: 76.2 - 100 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: orange Box profile: 85 x 40 mm Traverse type: GN85x41mm Clear width: 2,775 mm 08x safety pins, used Version: completely galvanized 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,980 mm Depth chipboard: 1,000 mm Surface: coated if necessary (possibly two-part) 01x Chipboard II. Choice, used Thickness chipboard: 38 - 46 mm Width chipboard: 2,755 mm Depth chipboard: 1,000 mm Surfac ...

We offer you a used backscreen for purchase. This is a special item. There are scratches and damage to the goods. Included are: 01x Rear panel, used Material color: sendz. galvanized Total width: approx. 2,200 mm Total height: approx. 900 mm Mesh width: approx. 100 x 40 mm Frame profile: C Profile approx. 30 x 10/25 mm Round tube, approx. 20 mm

We offer you a collision protection guardrail here for purchase. Included in delivery are: 01x Collision protection guardrail, used Total length: approx. 2,575 mm clear width: approx. 2,400 mm Total height: approx. 600 mm Consisting of: 02x frame profile, used Manufacturer: Mecalux Material Color: Blue Profile abbreviation: approx. 100 x 79 x 3.0 mm Clear width: 2,300 02x posts, used Material color: hot-dip galvanized Total height: approx. 600 mm Incl. 2 welded screw-on plates: approx. 200 x 100 mm Base plate: approx. 200 x 200 x 10 mm Hole diameter: approx. 15 mm Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection according to DIN EN 15635 carried out according to the Requirements of BGR 234 Visual inspection for all shelving systems Delivery with o ...

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve to illustrate ...

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 800 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 800 mm Chipboard if necessary two-part The images serve to illustrate ...

We offer you here a used workbench of the manufacturer Gemac for purchase. Workbench depth: 1,000 mm Technical data for the workbench: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized 08x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 1,000 mm Chipboard if necessary two-part The images serve to illu ...

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 1,000 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 1,000 mm Chipboard if necessary two-part Price per pcs.: 45,74 € incl. 19% VAT. 08x drill screws, new Vers ...

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 800 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 800 mm Chipboard if necessary two-part Price per pcs.: 36,59 € incl. 19% VAT. 08x drill screws, new Version:  ...

We offer you here a used Workbench of the manufacturer Gemac for sale. Workbench depth: 600 mm Technical data for the workbench frame: Manufacturer: Gemac Type: Normapal The scope of delivery includes: 02x workbench stand, used Material color: green Stand profile: 90 x 70 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material colour: cream white IPE Profile: 80 x 42 mm clear width: 2,700 mm 04x locking pins, used Version: completely galvanized Optionally, we offer you: 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,890 mm Depth chipboard: 600 mm Chipboard if necessary two-part Price per pc:: 27,45 € incl. 19% VAT. 08x drill screws, new Version: gal ...

Rounds: 200 mm Squares: 0 mm Flats: 120 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Shaft Ø:            200mm Number of rolls:    3 Stroke X-Axis:      700mm Capacity flat:      120 x 50 x 2000 mm Capacity Tube:      133 x 6,0 mm mm Capacity bar:       80 x 80 x 2000 mm Capacity T-Profile: 120 x R 1500 mm Capacity HEA-Profile:320 x R 1600 mm Working speed:      4500 - 9000 mm Adjustment siderolls:550 Length:             3.000 mm  Width:              2.500 mm  Height:             2.500 mm  Weight:             5.100 kg   

Outside diameter maximum: 0 mm Inside diameter maximum: 0 mm Pipe length maximum: 0 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5428 MAKE        ROUNDO KUMLA SWEDEN TYPE          r-6 / z-60 YOP            1993 SPECIFICATIONS Horizontal and vertical          H + V Shaft Ø      100 mm Number of rolls       3 Resistance moment         56 CM³ Capacity flat         125 X 20 mm Capacity Tube        115 X 6 Ø x mm Capacity HEA-Profile       240 mm Working speed         7 mm/min. Control         PS/R DIMENSIONS Length        2000 mm Width  ...

rolling capacity max.: NA t workpiece diameter: 38 mm workpiece length: 500 mm total power requirement: 24 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. Originally, external gears were formed on the machine using  ...

Included in delivery are: 02x workbench stand, used Material color: white Frame profile: approx. 85 x 65 mm Stand height: approx. 900 mm Stand depth: approx. 1,000 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: green INP profile: approx. 80 x 42 mm clear width: approx. 2,880 mm 16x machine screws, M8 x 35 mm 16x nuts, M8 32x Washers, M8 The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the pla ...

We offer you here a used pallet rack stand of the Manufacturer Dexion for sale. Technical data for the pallet rack stand: Shelving system: Dexion Type: P90+ Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abbreviation: 120 x 100 x 2.5 mm Profile type: 120/25 Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 1,800 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

We offer you here a used pallet rack stand of the Manufacturer Dexion for sale. Technical data for the pallet rack stand: Shelving system: Dexion Type: P90+ Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abbreviation: 120 x 100 x 2.5 mm Profile type: 120/25 Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,200 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

We offer you here a used pallet rack stand of the Manufacturer Polypal for sale. Technical data for the pallet rack stand: Shelving system: Polypal Type: Stockpal Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abm.: 85 x 63 x 2,00 mm Profile Type: SKMO5220P Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 1,800 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

max. wheel diameter: 400 mm gear width: 500 mm max. module: 15 min. module: 0,5 total power requirement: 2,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 1 ...

Three-spindle copy and lock milling machine make ROTOX type KF 457Fabr. -No: 457 6870, year of construction approx. 1994Technical specifications:Max. Profile width: 125 mmMax. Profile height: 50 mmMilling path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors each: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx: 180 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum single-spindle copy router make ELU type AS 70Fabr. -No: 28736, built in 1980Technical specifications:Milling length: 250 mmMilling width: 100 mmlargest clampable profile width: 170 mmlargest clampable profile height: 100 (135) mmMilling spindle speed approx .: 12000 rpm.Collet diameter: 8.0 mmDrive power: 740 W.Power connection: 380 V / 50 HzCompressed air condition f. clamping and spraying: 150 l / minat: 5 - 8 atüExternal dimensions: 720 x 650 x 1440 mmWeight approx: 100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum single-spindle copy router make ELU type AS 70Serial -No: 70425, year of manufacture 1983Technical specifications:Milling length: 250 mmMilling width: 100 mmlargest clampable profile width: 170 mmlargest clampable profile height: 100 (135) mmMilling spindle speed approx.: 12000 rpm.Collet diameter: 8.0 mmDrive power: 740 WPower connection: 380 V / 50 Hzcompressed air cond. f. Clamping and spraying: 150 l/minat:5 - 8 atmExternal dimensions: 720 x 650 x 1440 mmWeight approx.: 100 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20041, built in 1994Technical specifications:Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgvery little used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Kohler unwinding reel with 9 roll straightening unit Last use Align copper L profile from coil, feed profile via balancing section. Specifications Number of rollers: 9 pieces Roll diameter: 30 mm Throughput width: 120 mm Belt speed: 0-10 m/min Belt speed control: Infrared via belt loop Working direction: left to right Belt inlet: left Measuring device: digital Roller mill adjustment: motorized Quick-change device: manual Engines Straightening machine drive: 5, kW drive at 3000 rpm Oil pump: 0.06 kW power at 1300 rpm Roller mill adjustment: 0.15/0.6 kW at 81/344 rpm Total drive power: 10 kW Voltage: 380 V Weight 6 t Unwinding reel type 300.2 Load capacity: 2 x 300 kp Width: 80 mm Spread: manual Spreading range: 750 - 1050 mm Coil outer diameter 1200 mm Brake: Disc brake / pneumatic Page shift: manual Panning: manual HK 120 upright straightening ma ...

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20092, built in 1995Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length for wings: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7.0 barAir consumption per working cycle: 12/24 lDrive power: 740 WPower connection: 380 V ,, 50 HzDimensions L x W x H: 3090 x 860 x 1690 mmWeight approx .:370 kgWith- 4 collets- 3 hori. tensioners- 1 stop each on the right and left- Footswitchvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Door belt drilling machine make ELUMATEC type TBM 126Fabr. -No: 20087, built in 1997Machine bed length: 3000 mmClamping range profile width sash: 108 mmClamping range Profile width Frame: 200 mmProfile height: 45 - 80 mmMax. Insert length: 2400 mmSpindle speed: 1900 rpm.Compressed air connection: 7 barAir consumption per working cycle: 12/24 lDrive power: 740 WVoltage: 380 V ,, 50 HzDimensions L x W x H: 3000 x 750 x 1650 mmWeight approx. 350 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

We offer you here a used square tube for sale. The square tube consists of 2 C-profiles welded together. Included in delivery are: 01x square tube/ C-profile, used Material color: sendzimir galvanized Total length: approx. 2,750 mm Profile: approx. 45 x 45 mm Material thickness: approx. 1.2 mm Hole diameter: approx. 6 mm Distance center - center hole: approx. 2,730 mm Shipping costs on request

grinding length: 500 mm grinding width: 200 mm workpiece height: 250 mm total power requirement: 5,5 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _________________________________________________ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 ...

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...

Hydr. 4-fold combined profile steel shears make MUBEA type KLSH 550Make -No: 0155682757250Technical specifications:Capacity of the flat steel shears: 200 x 20 / 400 x 16mmCutting length: 400 mmPerformance of the profile steel shears:L-steel: 120 x 13 mmor: 130 x 90 x 12 mmRound bar: 35 mmSquare steel: 32 mmU steel: U 160Hole punch performancePressure capacity: 50 tStroke:50mmpunches :30 in 15 / 28 in 16 mmProjection: 320 mmPerformance of the release devicetriangle notcher:L + T - iron: 75 x 8Notch depth: 80mmLatch width: 40 mmGeneral data of the machineDrive power: 7.5 kWDimensions L x W x H: 1160 x 550 x 1840 mmWeight approx.: 1.1 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for yo ...

5 axis sawing, drilling and milling – portal machining center with 9 meters machining length (alternatively shorter – 7 or 4 meters machining length) for all profile and pipe materials - aluminum - steel - stainless steel - plastics - fiber composite plastics such as GRP and CFRP - drilling + tapping, flow drilling, milling + thread milling at a free angle – for example, steel profiles sawing up to 15 mm wall thickness – glass or carbon fiber materials up to 25 mm wall thickness Largest saw blade diameter 500 mm Largest machining length with a 5-sided machining 9,000 mm Largest workpiece cross-section 650 mm x H 450 mm Working range in five-axis operation 9,000 mm x 475 mm x H 450 mm Spindle drive power 18 kW at 60% ED – 15 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving turret tool magazine for 12 pieces of tools Tool holder HSK63 Rapid speeds up to 100 ...

Drill diameters 8 - 40 mm Drill taper MK4 Max. profile height 1.000 mm Max.Profile length 18.000 mm Max. thickness 150 mm Controller Siemens 840D

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

Inv. Num. : 5725 Type: A 89 TNCB Producer: CSM Created: 2014 Parameters: Maximum bending angle: 180 pcs Total power requirement: 15 kW The largest profile: 60x60x6 mm bending radius in the middle of the tube: 350 mm bending radius in the middle of the profile: 300 mm Machine height: 1200 mm Machine length: 4700 mm Machine width: 1200 mm Machine weight: 2500 kg

The depth bridge is suitable for a column depth of 1,050 mm and a maximum truss width of 40 mm. Included in delivery are: 01x deep bridge, used Material color: orange Total length: approx. 1,058 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 960 mm Technical data for the deep bridge: Shelving system: Nedcon Profile abbreviation: 60 x 40 mm Truss pad: approx. 43 mm Material thickness profile: approx. 1.50 mm Material thickness: approx. 4.00 mm Unit weight: approx. 2.50 kg General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

1 used pallet rack longitudinal truss shelf Make: SLP Type: SL20 Year of construction: 2016/ Extension 2019 -789 pieces of stand frame; Frame height: approx. 6,150-7,150 mm; Frame depth: 1,100 mm screwed truss; Profile: 100 mm; Material colour: blue Field load: 12,000 kg -208 pieces of trusses; Traverse length: 3,600 mm;Material colour: orange -5,300 traverses; Traverse length: 2,700 mm;Profile: 125 x 50 mm; Material colour: orange -96 pieces of trusses; Truss length: 1,800 mm;Material colour: orange with safety hook Construction can be individually designed. The dismantled system is in our warehouse in Eitorf Transport and assembly can be offered separately. The offered price is for self-collection in Eitorf The material can be viewed in advance. Price on request

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 24,605 mm Number of fields / shelf row: 09 pcs á 2,645 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profile: 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 36x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Traverse type: 2T 120 Clear width: 2,645 mm load per pair of trusses 1,500 kg, with the same. distributed load 72 ...

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

Rounds: 225 mm Squares: 75 mm Flats: 0 mm Flats on edge: 0 mm Angles: 75 mm (1) horizontal / (2) vertical: 1   Make Roundo R3 Type R 3 Profile bender Year 1985 Roundo R 3 Horizontal and vertical profile bender Outside diameter max. (mm)Angle 75 x 75 x 7 Inside diameter max. (mm)IPE 140 x 700 Max. pipe length (mm)Shaft 75 mm Max. angle Rolls 225 mm Wall Thickness (mm)Cap. 14 cm3 Remote control  

MEZZANINE NEWWARE DATA: L : approx. 10m B : approx. 20m Lower edge of the stage : approx. 3.0 m Upper edge of the stage : approx. 3.38 m Total area : approx. 200 sqm Load : 500 kg / sqm Covering : 38 mm chipboard P6, top natural bottom white. Column grid : 5,0m x 4,0m NO CROSSES , bracing by strut brace. New goods ex works plus freight postcode dependent. Scope of delivery: 20 x C profile 4000 mm, sendzimir galvanized. 52 x S profile 4800 mm , sendzimir galvanized . 18 x support 3000 mm , RAL 7016 . 03 x strut brace 3049 mm , RAL7016 . 93 x chipboard 2400 x 1000 x 38 mm natural/white P6 . 18 x lining plates for supports . 18 x Set dowels for supports . Optionally available on request: railings, transfer station, stairs, ground anchors, collision protection, etc. can also be purchased from us. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDI ...

MEZZANINE DATA: L : approx. 10m B : approx. 20m Lower edge of the stage : approx. 2.5 m Top edge of the stage : approx. 2.88 m Total area : approx. 200 sqm Load : 500 kg / sqm Covering : 38 mm chipboard P6, top natural bottom white. Column grid : 5,0m x 4,0m NO CROSSES , bracing by strut brace. New goods ex works plus freight postcode dependent. Scope of delivery: 20 x C profile 4000 mm, sendzimir galvanized. 52 x S profile 4800 mm , sendzimir galvanized . 18 x support 2500 mm , RAL 7016 . 03 x strut brace 2517 mm , RAL7016 . 93 x chipboard 2400 x 1000 x 38 mm natural/white P6 . 18 x lining plates for supports . 18 x Set dowels for supports . Optionally available on request: railings, transfer station, stairs, ground anchors, collision protection, etc. can also be purchased from us. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER  ...

MEZZANINE DATA: L : approx. 10m B : approx. 15m Lower edge of the stage : approx. 3.0 m Upper edge of the stage : approx. 3.38 m Total area : approx. 150 sqm Load : 500 kg / sqm Covering : 38 mm chipboard P6, top natural bottom white. Support grid : 5,0m x 5,0m NO CROSSES , bracing by strut brace. New goods ex works plus freight postcode dependent. Scope of delivery: 12 x C profile 5000 mm, sendzimir galvanized . 40 x S profile 4800 mm, sendzimir galvanized. 12 x support 3000 mm , RAL 7016 . 03 x strut brace 3049 mm , RAL7016 . 70 x chipboard 2400 x 1000 x 38 mm natural/white P6 . 12 x lining plates for supports . 12 x Set dowels for supports . Optionally available on request: railings, transfer station, stairs, ground anchors, collision protection, etc. can also be purchased from us. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFE ...

Included in delivery are: 02x workbench stand, used Material color: white Frame profile: approx. 85 x 65 mm Stand height: approx. 900 mm Stand depth: approx. 800 mm Incl. transverse and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x workbench trusses, used Material color: green INP profile: approx. 80 x 42 mm clear width: approx. 2,880 mm 16x machine screws, M8 x 35 mm 16x nuts, M8 32x Washers, M8 The pictures serve to clarify the material. The material colour may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place ...

MEZZANINE DATA: L : approx. 10m B : approx. 15m Lower edge of the stage : approx. 2.5 m Top edge of the stage : approx. 2.88 m Total area : approx. 150 sqm Load : 500 kg / sqm Covering : 38 mm chipboard P6, top natural bottom white. Support grid : 5,0m x 5,0m NO CROSSES , bracing by strut brace. New goods ex works plus freight postcode dependent. Scope of delivery: 12 x C profile 5000 mm, sendzimir galvanized . 40 x S profile 4800 mm, sendzimir galvanized. 12 x support 2500 mm , RAL 7016 . 03 x strut brace 2517 mm , RAL7016 . 70 x chipboard 2400 x 1000 x 38 mm natural/white P6 . 12 x lining plates for supports . 12 x Set dowels for supports . Optionally available on request: railings, transfer station, stairs, ground anchors, collision protection, etc. can also be purchased from us. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILO ...

MEZZANINE DATA: L : approx. 10m B : approx. 10m Lower edge of the stage : approx. 3.0 m Upper edge of the stage : approx. 3.38 m Total area : approx. 100 sqm Load : 500 kg / sqm Covering : 38 mm chipboard P6, top natural bottom white. Support grid : 5,0m x 5,0m NO CROSSES , bracing by strut brace. New goods ex works plus freight postcode dependent. Scope of delivery: 08 x C profile 5000 mm , sendzimir galvanized . 28 x S profile 4800 mm , sendzimir galvanized . 09 x Support 3000 mm , RAL 7016 . 03 x strut brace 3049 mm , RAL7016 . 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . 09 x Lining plates for supports . 09 x Set dowels for supports . Optionally available on request: railings, transfer station, stairs, ground anchors, collision protection, etc. can also be purchased from us. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING O ...

MEZZANINE DATA: L : approx. 10m B : approx. 10m Lower edge of the stage : approx. 2.5 m Top edge of the stage : approx. 2.88 m Total area : approx. 100 sqm Load : 500 kg / sqm Covering : 38 mm chipboard P6, top natural bottom white. Support grid : 5,0m x 5,0m NO CROSSES , bracing by strut brace. New goods ex works plus freight postcode dependent. Scope of delivery: 08 x C profile 5000 mm , sendzimir galvanized . 28 x S profile 4800 mm , sendzimir galvanized . 09 x Support 2500 mm , RAL 7016 . 03 x strut brace 2517 mm , RAL7016 . 47 x chipboard 2400 x 1000 x 38 mm natural/white P6 . 09 x Lining plates for supports . 09 x Set dowels for supports . Optionally available on request: railings, transfer station, stairs, ground anchors, collision protection, etc. can also be purchased from us. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER T ...

MEZZANINE DATA: L : approx. 5m B : approx. 5m Lower edge of the stage : approx. 3.00 m Upper edge of the stage : approx. 3.38 m Total area : approx. 25sqm Load : 500 kg / sqm Covering : 38 mm chipboard P6, top natural bottom white. Support grid : 5,0m x 5,0m NO CROSSES , bracing by strut brace. New goods ex works plus freight postcode dependent. Scope of delivery: 02 x C profile 5000 mm , sendzimir galvanized . 08 x S profile 4800 mm , sendzimir galvanized . 04 x Support 3000 mm , RAL 7016 . 04 x strut brace 3049 mm , RAL7016 . 12 x chipboard 2400 x 1000 x 38 mm natural/white P6 . 04 x Lining plates for supports . 04 x Set dowels for supports . Optionally available on request: railings, transfer station, stairs, ground anchors, collision protection, etc. can also be purchased from us. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TA ...