128,883 used machines on RESALE, but how to find them? Machine Search
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.235 mm - 160x60x2mm Properties: - Length: 1,235 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,235 mm Information without guarantee Properties: Length: 1.235mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1,200 mm - 160x60x2mm Properties: - Length: 1,200 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,200 mm Information without guarantee Properties: Length: 1,200mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Used Sigma Profil S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.175 mm - 160x60x2mm Properties: - Length: 1,175 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,175 mm Information without guarantee Properties: Length: 1,175mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Auction-ID: A7-45209-5
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 2,620 mm - 160x60x2mm Properties: - Length: 2,620 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 2,620 mm Information without guarantee Properties: Length: 2,620mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: Homag, profile scraper from edge banding machine BRANDT KM 36 / KM35 -Quantity: 1 piece available -Dimensions: 510/430/H570 mm -Weight: 62 kg
Rubber sealing profile, sealing plate, curing tool, seal, edge protection, solid rubber rectangular profile -Rubber sealing profile: with 2 grooves, 3 pieces -Length: 3 x 8450 mm / total 25.35 m -Cross-section: 50 x 55 mm -Groove width: 5 mm -Weight: 120 kg
Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS8 1200 x 2200 -Price: per piece -Number: 2 pieces -Dimensions: 2240/680/H280 mm -Weight: 66 kg
Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete -Dimensions: Ø 200 x 81 mm -Weight: 11 kg
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1,670 mm - 160x60x2mm Properties: - Length: 1,670 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,670 mm Information without guarantee Properties: Length: 1,670mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg
Hinge, door hinge, folding hinge, angle profile -Angle profile: Material: Aluminum, 45 pieces -Dimensions/recess: see photos / technical drawing -Price/Fee: complete Dimensions: 70/60/H35 mm -Weight: 0.05 kg/pc.
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.270 mm - 160x60x2mm Properties: - Length: 1,270 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,270 mm Information without guarantee Properties: Length: 1,270mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...
4,000 m construction profiles, C-shape galvanized Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiation price: € 4,90 net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price
Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.
ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included
Machine almost unused Pressure: 60.0 t Square steel: 35.0 mm Technical specifications Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in sqmm: Ø28 in 15 / Ø38 in 11 mm Projection: 220 mm Flat steel: 200x20 / 300x15 mm Y0798Jol Knife length: 317 mm Oil capacity: 45.0 ltr. Working height: 940 / 1140 mm Stroke rates per minute: max. 26 Working stroke: 55.0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimensions HxWxD: 1510 x 590 x 1570 mm
Universal surface grinding machine of the Jung brand suitable for tooling, fixture construction, training and mould making Bssx7D8P Travel distances : 400 x 150mm Table size : 520x150mm Grinding length 400mm Grinding width 150mm Workpiece height 240mm Table size 520x200mm Connection 50Hz 380V Motor 4.5KW Machine weight approx. 2250kg Dimensions 2500x2100x1900mm
RGB+UV (4 in 1) Flight case included. Auction-ID: A1-41275-162
Profile rail guide with one carriage DRECKSHAGE HGW25CCH 1 carriage: 70 x 58 mm profile rail: 23 x 22 x 235 mm New ! Dimensions: 235 x 70 x 36 mm
Round profile pliers TAKRAF, HEBEZEUGWERK SUHL ZR 05 ( ZR05 ) Load capacity: 500 kg Gripping range: 65 - 150 mm used, tested ! Dimensions: 350 x 180 x 250 mm Pictures similar!
Round profile pliers TAKRAF ZR1 1000 kg Gripping width: 100 /250 mm used, tested ! Dimensions: 500 x 500 x 180 mm
Section steel pliers, profile iron gripper TAKRAF ZP 1 ( ZP1 ) Load capacity: 1000 kg Gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm
U-profile, protective profile PAGUS for Sick C4000 80 mm Wide 4 mm galvanized steel Dimensions: 1300 x 80 x 70 mm
Contact-Duo-Profile, Row Limit Switch, Series Position Switch GELBAU 018.10 3100.0118 Profile length: 1920 mm with installation material New ! Dimensions: 2130 x 120 x 110 mm
Profile steel shears, hand lever shears SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm continuous: 10 mm drivable ! used, tested ! Dimensions: 1300 x 700 x 1600 mm
Festo UP cross-section milling machine Clamping length / length milling profile: 200mm 7.5 KW
Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg
SPECIFICATIONS: Machinable tool: max. Ø 300 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Different types of grinding wheels
Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...
maximum number of results exceeded
please refine your search
10 € 
