profile grinder used for sale

FlexTrim 6003 Manufacturer: FlexTrim Type: FT6003 Year: 2009 M-Nr.: 515 Motor: 0,75kW RPM: 150-600 tpm – variable RPM-control Dust-extraction: ø125 Dimensions-brush: ø350 200 Working height: Working height adjustment Swivelling: Horizontal – vertical

Manufacturer: Elumatec Model: SBZ 130 Year: 2007 Condition: Used Stock number: 9523 Max. machining length: 6500 mm Spindle drive power: 5.5 kW Maximum spindle speed: 6000 1/min Number of axes: 3 Maximum feed in the X-axis: 34 m/min Maximum feed rate in the Y-axis: 18 m/min Maximum feed rate in the Z-axis: 18 m/min Tool magazine capacity: 8 Machine weight: 5500 kg

Stock No.: 4040 PROFILE BENDING MACHINE Manufacturer: ROUNDO, Type: R5 Serial No.: -, Year of manufacture: 1974 Specifications: Upper roller 360 mm Ø Lower roller 360 mm Ø Flat steel 250 x 30 mm Frame steel upright 100 + 140 x 30 dia. 1000 mm Angle steel 120 x 12 mm U-steel UNP 20 mm Load by steel 40 Kg/mm2 48 cm3 Total performance 7.5 Hydraulic.                          Dimensions: Length: 1700 mm, Height: 1200 mm, Width: 1500 mm, Weight: 3800 kg

Optical Profile Projector BATY SM20 XL2 Table size: Length 320 mm x Width 180 mm Screen: Ø 500 mm Visualized X - Y-Axes Scale: QUADRA-CHECK 100 Equipped with: 1 optical magnifier 20 x 1 optical magnifier 50 x 1 optical magnifier 100 x Voltage: 220 V mono Width: 1300 mm Depth: 1200 mm Total height with cover: 2000 mm Weight: approx 200 KG Machine in VERY GOOD CONDITION

Power supply: 220 V / 1 ph / 50-60 Hz, Total power: 2,2 kW, Air consumption: 30 lt/min, Air pressure: 6-8 bar, Min. weldable profile height: 40 mm, Max. weldable profile height: 165 mm, Max. weldable profile width: 198 mm (180 degrees) / 158 mm (90 degrees) / 98 mm (45 degrees), Min. weldable frame width and length: 350x350 mm Auction-ID: A1-50595-1

Voltage: 220 V, Frequency: 50/60 Hz, Motor power: 0,75 kW, Motor speed: 2850 rpm, Max. machinable profile height: 90 mm, Max. machinable profile width: 120 mm, Arbor diameter: Ø30 mm, Max. blade width: Ø140 mm. Auction-ID: A1-50595-8

Power supply: 380V, 3 ph, 50-60 Hz, Spindle speed: 2810 RPM, Total power: 1,8 kW, Air pressure: 6-8 bar, Air consumption: 41 lt/min, Min. processable profile length: 100 mm, Saw blade outer diameter: Ø400 mm, Maximum saw blade height: 140 mm, Saw blade bore diameter: Ø32, Saw blade thickness: 4,2 mm, Number of teeth: 120, Conveyor: Length: 500 + 300 cm / Width: 35 cm. Year 2012 Auction-ID: A1-50595-26

Electrical supply: 220Vac/50Hz, Motor power: 0.85kW, Motor speed: 32000 rpm, Profile routing height: min. 40mm, max. 100mm, Cutter diameter: 8mm/5mm/80mm Auction-ID: A1-50595-5

Air pressure: 7 bar, Air consumption: 55 lt/cycle, Crimping force: 2x3500 kgf, Min. profile height: 60 mm, Max. profile height: 200 mm, Max. profile width: 140 mm Auction-ID: A1-50595-3

Power supply: 220 VAC, 1 ph, 50-60 Hz, Spindle speed: 2860 RPM, Motor power: 1,5 kW, Air pressure: 6-8 bar, Air consumption: 10 lt/min, Saw blade outer diameter: Ø400 mm, Saw blade bore diameter: Ø32 mm, Saw blade thickness: 4 mm, Number of teeth: 120, Min. processable profile length: 350 mm, Conveyor: Length: 3000+3000 mm / Width: 200 mm / Adjustable height / Both sides. Auction-ID: A1-50595-13

Power supply: 380-400 V, 3 ph, 50-60 Hz, Spindle speed: 45/90 RPM, Motor power: 1,3 -1,8 kW, Saw blade outer diameter: Ø250 mm, Saw blade bore diameter: Ø40 mm, Saw blade thickness: 2.5 mm, Number of teeth: 240. Auction-ID: A1-50595-27

Power supply: 380-400 V, 3 ph, 50-60 Hz, Spindle speed: 45/90 RPM, Motor power: 1,3 -1,8 kW, Saw blade outer diameter: Ø275 mm, Saw blade bore diameter: Ø40 mm, Saw blade thickness: 2.5 mm, Number of teeth: 240, Min. processable profile length: 150 mm. Cutting blade not included. Auction-ID: A1-50595-7

Power supply: 380V, 3 ph, 50-60 Hz Spindle speed: 2810 RPM Total power: 1,5 kW Air pressure: 6-8 bar Air consumption: 41 lt/min Min. processable profile length: 100 mm Saw blade outer diameter: Ø350 mm Maximum saw blade height: 100 mm Saw blade bore diameter: Ø32 Saw blade thickness: 3,8 mm Number of teeth: 120 Conveyor: Length: 4000 mm / Width: 350 mm / Both sides. Auction-ID: A1-50595-42

Z&B Starline 500 CNC Profile Surface Grinding Machine Manufacturer: Z&B Model: Starline 500 Year: 2000 Machine type: CNC Profile Surface Grinding Machine CNC profile surface grinding machine equipped with Siemens 840 CNC control. The machine has been generally overhauled and is reported to be in very good condition. Currently under power. Technical specifications: CNC control: Siemens 840 Magnetic clamping surface: 500 × 200 mm Grinding wheel accessories: Approx. 30 flange holders for grinding wheels Operating status: Under power Approx. dimensions (L × W × H): 2,500 × 1,800 × 2,000 mm Approx. weight: 2,500 kg Condition: Used, generally overhauled, very good condition. All descriptions, technical specifications, dimensions, weights and other information are indicative only. Auction-ID: A7-50842-1

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37

including: flat, square full; including a maximum length of approximately 2600 mm; Auction-ID: A1-50476-42

equipped with Hawa lever hand-held profile cutting device; table top; equipped with length stop; work table mounted on profile steel base; heavy plywood table top; equipped with base cabinet and drawer; including various electrical contents including power plugs; Auction-ID: A1-50476-255

Heavy-duty end-milling machine for aluminium profiles, corresponding to the Hermis NR model. Equipped with a 2 HP motor, rotating vice, quick tool change, automatic spray lubrication, two pneumatic vices and a transparent safety guard. Auction-ID: A7-50988-15

HERMIS NR end-milling machine for aluminium profiles, display (showroom) model, reference N002/0961. Heavy-duty type with quick tool change. Has a vice that rotates in degrees and changes positions. Powerful 2 HP motor, automatic spray, two air vices for holding the profiles and a transparent safety guard. Technical specifications: Motor 2 Hp. Max. stroke 410 mm. Speed 3000 rpm. External dimensions 600 x 900 x 1200 mm. Weight approx. 100 kg. Display model, delivered with new machine warranty Auction-ID: A7-50988-14

Used double-head (twin-head) mitre saw for cutting aluminium profiles, brand Ferrari, model SGV500, saw blade diameter 500 mm. Economical solution suitable for straight and mitre (angle) cuts of aluminium profiles in window and aluminium-frame construction. Sold in its current condition; repairs, inspections, improvements and cleaning are at the buyer's expense. Engine power, cutting angles, sawing range, electric connection, weight and dimensions are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-24

puncher: 55 t round bar steel: 40 mm square edge steel: 40 mm L-beam: 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.): Ø 40 x 10 mm shear: flat material: 300 x 15 mm throat: 250 mm work stroke: 60 mm work height max.: 1085 mm total power requirement: 4,0 kW weight: 1300 kg range L-W-H: 2000 x 900 x 1800 mm Equipment: - Electro-hydraulic structural steel shears with 4 workstations Flat steel shears Structural steel shears Punch press Notching station - Driven by two hydraulic cylinders - Infinitely variable stroke adjustment - Support table at the hole-punching The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures

In different types and designs mounted on and with workbench size approximately 950x2150mm Auction-ID: A1-50244-54

Geibel & Hotz FS 1050 GT SL Surface Grinding Machine Working range grinding length (max.) 1,000 mm Grinding width (max.) 500 mm X-axis (longitudinal) longitudinal table stroke 50 – 1,050 mm Table speed 0.001 – 35 m/min (infinitely variable) Y-axis (vertical) Distance table to spindle center 180 – 625 mm (optionally up to 825 mm) Perpendicular speed 50 – 4,000 mm/min Z-axis (transverse) transverse travel (max.) 500 mm Grinding spindle Grinding wheel dimensions 400 x 100 x 127 mm (Ø x width x bore) Spindle drive (standard) approx. 11 kW Max. speed up to 2,380 rpm / 35 m/s Weight & installation Total weight of the machine approx. 4,500 kg Max. table load approx. 1,380 kg Various accessories according to photos: - Grinding wheel mounts - Documentation in detail - Hoffmann Grinding Wheel Adjustment Scale If you have any questions, please contact us at Tel. 017 ...

punching pressure: 70.0 t punch diameter: 26.0 in 20.0 mm punch diameter: 57.0 in 9.0 mm throat: 305 mm round bar steel: 45.0 mm square edge steel: 45.0 x 45.0 L-beam: 130 x 13 mm shear: flat material: 300 x 20.0 / 375 x 15 mm blade length: ca. 380 mm adjustment of stroke: 0 - 55 mm strokes per minute: 34 work height max.: 1030 / 890 mm rectangle notching till: max. 10.0 mm ST voltage: 400 V total power requirement: 5.5 kW weight: 1620 kg dimensions: 1700 x 1000 x 1800 mm Well-maintained condition () Current new price ~ 20.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Equipped with multiple workstations: Punching station Flat bar shear Angle/profile steel shear Notching station - Infinitely adjustable stroke length - Very compact design - Support table at the notching and punching stations - Lateral support surfaces - 2x mobile  ...

punching pressure: 36.0 t punch diameter: 27.0 in 10.0 mm throat: 170 mm round bar steel: 30.0 mm L-beam: 80 x 80 x 8 mm square edge steel: 25 x 25 mm shear: flat material: 350 x 6 / 200 x 13 mm blade length: 356 mm strokes per minute: ca. 24 pro Min work height max.: 980 mm oil volume: 30.0 l voltage: 400 V total power requirement: 2.2 kW weight: 485 kg dimensions: 1200 x 800 x 1500 mm From a maintenance workshop Original price of base machine ~ 12.000 euros Special price upon request Features: - Compact electro-hydraulic structural steel shears - Punching station, flat steel shear, angle/profile steel shear - Sturdy welded construction - Very compact design - Side support surfaces - Various punches and dies (red metal box) - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution o ...

pressure: 60.0 t punching cross-cut in cmm: 28 in 15 / 38 in 11 mm square edge steel: 35 x 35 mm L-beam: 120 x 120 x 12 mm round bar steel: 40.0 mm flat steel: 200 x 20 / 300 x 15 mm blade length: 317 mm throat: 220 mm work height max.: 940 / 1140 mm strokes per minute: max. 26 work stroke: max. 55.0 mm oil volume: 23.0 ltr. total power requirement: 4.0 kW weight of the machine ca.: 1440 kg Dimensions (HxWxD): 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Em ...

pressure: 50.0 t punching cross-cut in cmm: 27.0 in 14.0 mm ST round bar steel: 32 + 17 mm square edge steel: 30 + 18 mm L-beam: 100 x 10 mm throat: 200 mm shear: flat material: 190 x 10 mm blade length: 200 mm stroke - stepless adjustable: 10 - 28 mm stroke: 14 - 28 H/min total power requirement: 4.0 kW weight: 900 kg range L-W-H: 950 x 650 x 1730 mm from a maintenance workshop in good condition () Equipment: - Compact electro-hydraulic combined structural steel shear with notching station with punching station flat bar shear angle steel shear round and square bar shear - Support table at the notching station - Support table at the punching station - Stripper at the punching station - 1x mobile foot switch - Assortment of various punches and dies - Original operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface grinding machine Elb, Optimal 6375 NC, built in 1990 Grinding area 600 x 400 mm

Batch of aluminium profile, 40x40mm, 170kg total including pallet Auction-ID: A1-50936-117

Batch of used ISO aluminium profile mix (various sizes and lengths, 82kg incl pallet) Auction-ID: A1-50936-48

Batch of used ISO aluminium profile mix (various sizes and lengths, 112kg incl pallet) Auction-ID: A1-50936-47

Batch of used ISO aluminium profile mix (various sizes and lengths, 182kg incl pallet) Auction-ID: A1-50936-46

Batch of aluminium profile, 40x40mm, 92kg total including pallet Auction-ID: A1-50936-118

Subject, 10 x profile approx 3870x330x160mm; 10x profile approx 2440x330x160mm; Auction-ID: A1-47395-1035

Material rack with batch of stainless steel, aluminium and steel profiles – 2800 × 1400 × 2200 mm Specifications: Steel material racking / long material racking Dimensions of shelving: approx. 2800 × 1400 × 2200 mm Equipped with 6 support/upright sections Multiple storage levels for long material Including full metal stock Various stainless steel round tubes Ø18 mm Approx. 30 stainless steel round tubes Ø25 mm Various tubes 40 × 20 mm Various tubes 40 × 40 mm Various aluminium box sections Various round metal tubes in different diameters Various square and rectangular tubes Various bar materials and other long profiles Different lengths, diameters, wall thicknesses and designs Both short and longer pieces of equipment available Features: Large number of aluminium construction and profile pieces Various aluminium profile systems with complex cross-sect ...

Two old Mitutoyo and Nikon projectors are available. 1) Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. 2) Nikon V-12, projection screen: 305mm, rotation range: 360°, lens compatibility: 10x/20x/50x/100x, resolution: +/-0.1%, max. workpiece height: 100mm, weight: approx. 80kg. On-site inspection is possible.

Keyence IM-6225 digital measurement projector including IM-7500 control unit. Works flawlessly and ready to use. Prior sale and errors excepted.

CNC control HEIDENHAIN iTNC 530 with handwheel, travels: X-axis approx. 1,500 mm, Y-axis s approx. 2,400 mm, Z-axis approx. 800 mm, clamping table length x width x height approx. 2,500 x 1,500 x 530 mm, table load max. 500 kg, milling spindle spindle power 4 KW, spindle speed 6,000 rpm, tool holder 78/8 flange, feed speed X-, Y-, Z-axis 20 m/min, axis acceleration 1.5 m/s², space requirement machine 6,000 x 4,000 x 3,900 mm, total weight approx. 8,000 kg, NOTE: Fully functional condition, regular maintenance by machine manufacturer! The machine is already at another location at Kartonstraße 2, D-88255 Baienfurt. Freely loaded FCA D-88255 Baienfurt

General Description CNC fiber laser tube and profile cutting machine manufactured by Bodor / Jinan Bodor CNC Machine Co., Ltd. . Designed for precision laser cutting of round, square, rectangular and other metal tubes and structural profiles. The system features a long processing bed, powered rotary chuck and automatic tube loading/handling equipment. Technical Details Manufacturer: Bodor / Jinan Bodor CNC Machine Co., Ltd. Machine type: CNC fiber laser tube/profile cutting machine Bodor touchscreen CNC control Powered pneumatic/automatic rotary chuck system Automatic/semi-automatic tube loading and handling system Long tube support/processing bed Enclosed laser cutting section Extraction system Chuck clamping ranges depending on jaw configuration: 8–102 mm, 66–160 mm, 76–170 mm and 134–228 mm Dedicated Hanli HL-3000-QG2/2 fiber-laser chiller Chiller supply: 220 V ...

Keyence IM-6025 digital measurement projector including IM-6600 control unit. Measuring machine works perfectly and is immediately ready for use. Prior sale and errors excepted.

Single piece loading dimensions: 2200 x 100 x 100 mm Cross-section: 60 x 35 mm Length: 2100 mm Auction-ID: A7-51355-1078

Auction-ID: A1-51147-3

Single workpiece loading dimensions: 2100 x 60 x 40 mm Auction-ID: A7-51355-69

Auction-ID: A1-41281-8

including: 1x length 4840 mm; height 300 mm; 2x length 2650 mm; height 140 mm; 1x length 4260 mm; height 220 mm; 1x length 4890 mm; height 160 mm; 2x length 3140 mm; height 120 mm; including transport frame; Auction-ID: A1-50707-308

Single piece loading dimensions: 2200 x 100 x 100 mm Cross-section: 60 x 35 mm Length: 2100 mm Auction-ID: A7-51355-1068

including square and round; Which is galvanized; including maximum length 3300 mm; Auction-ID: A1-50707-278

CLAAS Disco 3200 F Profile Mower Manufacturer: CLAAS Model: Disco 3200 F Profile Year of construction: 2024 Operating hours: 25 hours Operating area: approx. 100 ha Working width: 3.0 m Facilities Front attachment Disc mower deck Drive via PTO Auction-ID: A1-51207-2287