profile grinder used for sale

Punching capacity: ø 18x14 mm, (diameter and thickness): ø 50x5 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate/min. (20 mm stroke): 41 Max. hole diameter: ø 160x2 Motor power: 3.7 kW Punching force: 35 ton Weight: 1200 kg

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

ABA Grinding Machine Starline CNC Profile Grinding Machine Surface Grinding Machine Hersteller [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Baujahr[construction year]: 10/2004 Weight [weight]: 6000kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Phone +49 17621834834

equipped with 6 wire brushes and 6 plastic brushes, interchangeable; electric rotating head; including "Delfin" extractor, type: DBF30 "M", year: 2017, s/n: 170486169

Consisting of 2 bundles of 135 pieces each.

Plus Roller End Mills and Disc Milling Cutters, HSS, Strassmann, Orion, WMW

Profile steel shears Round steel 25 mm Square steel 22 mm Angle steel 70 x 7 mm Cutting capacity 100 x 10 mm Sheet thickness 10 mm Total power requirement 1.3 kW Machine weight approx. 0.6 t Space requirement approx. 1.1 x 0.65 x 1.5 m Condition: unchecked (6)

Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.235 mm - 160x60x2mm Properties: - Length: 1,235 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,235 mm Information without guarantee Properties: Length: 1.235mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm

Approx. 500 kg of material in total; Longest pipe for transport 6000mm

Sold without content

Including: box profile and tube in different sizes.

Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1,200 mm - 160x60x2mm Properties: - Length: 1,200 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,200 mm Information without guarantee Properties: Length: 1,200mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm

Various dimensions including: 600x80x45 and 750x80x45. Including threaded rods 100x20mm.

Used Sigma Profil S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.175 mm - 160x60x2mm Properties: - Length: 1,175 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,175 mm Information without guarantee Properties: Length: 1,175mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm

Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 2,620 mm - 160x60x2mm Properties: - Length: 2,620 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 2,620 mm Information without guarantee Properties: Length: 2,620mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm

Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1,670 mm - 160x60x2mm Properties: - Length: 1,670 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,670 mm Information without guarantee Properties: Length: 1,670mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm

Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.270 mm - 160x60x2mm Properties: - Length: 1,270 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,270 mm Information without guarantee Properties: Length: 1,270mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm

4,000 m construction profiles, C-shape galvanized Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiation price: € 4,90 net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Make: YOUNG Type: JF 520 Year of construction 1992 Machine weight : 2200Kg Total weight: 2600kg Location : Haiger Price: 24.000 € excl. VAT. Description: Digital display, Fabr. Heidenhain, microprocessor control, profiling device, Fabr. Diaform, Machine Lighting, Coolant System, Sine Magnetic Clamping Table, Fabr. Jung, type SM 50 Specifications: Clamping surface (L x W in mm) 600 x 200 Grindable surface (L x W in mm) 600 x 250 Magnet size max. mm 600 x 200 Grinding wheel dimensions max. mm 225 x 25 x 51 Distance table/spindle center mm 350 (+50) Table longitudinal feed pendulum m/min 1 – 20 Creep gear mm/min 0 – 500 Grinding spindle drive speed rpm 800 – 4200 Power kW (w/creep gear) 2.2 (3.5)

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Haul-off for profiles, used and overhauled Manufacturer: Blake Type: 303-1600-180 Year of construction: 1995/2021 Serial.-No.: 637 Contact length, effective: 1600 mm Pad width: 180 mm Design: smooth pads at the bottom and top Haul-off force: approx. 20,000 N Hail-off speed: 0.1 -5.0 m/min. Drive Motor: DC Shunt Motor Motor power: 5.0 kW Dimensions: 240 x 90 x 175 cm Weight: approx. 950 kg Remark: The electrical control cabinet was renewed in 2021. The machine has been cleaned, repainted and checked for function. In addition, a new control panel as a remote control incl. 10 m long control cable.

Machine almost unused Pressure: 60.0 t Square steel: 35.0 mm Technical specifications Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in sqmm: Ø28 in 15 / Ø38 in 11 mm Projection: 220 mm Flat steel: 200x20 / 300x15 mm Y0798Jol Knife length: 317 mm Oil capacity: 45.0 ltr. Working height: 940 / 1140 mm Stroke rates per minute: max. 26 Working stroke: 55.0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimensions HxWxD: 1510 x 590 x 1570 mm

Universal surface grinding machine of the Jung brand suitable for tooling, fixture construction, training and mould making Bssx7D8P Travel distances : 400 x 150mm Table size : 520x150mm Grinding length 400mm Grinding width 150mm Workpiece height 240mm Table size 520x200mm Connection 50Hz 380V Motor 4.5KW Machine weight approx. 2250kg Dimensions 2500x2100x1900mm

Profile rail guide with one carriage DRECKSHAGE HGW25CCH 1 carriage: 70 x 58 mm profile rail: 23 x 22 x 235 mm New ! Dimensions: 235 x 70 x 36 mm

Round profile pliers TAKRAF, HEBEZEUGWERK SUHL ZR 05 ( ZR05 ) Load capacity: 500 kg Gripping range: 65 - 150 mm used, tested ! Dimensions: 350 x 180 x 250 mm Pictures similar!

Round profile pliers TAKRAF ZR1 1000 kg Gripping width: 100 /250 mm used, tested ! Dimensions: 500 x 500 x 180 mm

Section steel pliers, profile iron gripper TAKRAF ZP 1 ( ZP1 ) Load capacity: 1000 kg Gripping width: max 200 mm New ! Dimensions: 550 x 455 x 200 mm

U-profile, protective profile PAGUS for Sick C4000 80 mm Wide 4 mm galvanized steel Dimensions: 1300 x 80 x 70 mm

Contact-Duo-Profile, Row Limit Switch, Series Position Switch GELBAU 018.10 3100.0118 Profile length: 1920 mm with installation material New ! Dimensions: 2130 x 120 x 110 mm

Profile steel shears, hand lever shears SCHERENBAU NOSSEN ScDH 10 Knife length: 180 mm round: 24 mm square: 22 mm angle: 60 x 7 mm continuous: 10 mm drivable ! used, tested ! Dimensions: 1300 x 700 x 1600 mm

Festo UP cross-section milling machine Clamping length / length milling profile: 200mm 7.5 KW

SPECIFICATIONS: Machinable tool: max. Ø 300 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Different types of grinding wheels

Profile sanding unit IMA Type: 08.063

Radius profile scraper IMA 08.263

Radius profile scraper IMA Type: 08.515

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg

NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...

Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Manufacturer: Heesemann, Type: UKP 20, Year: 1990, Control: Programm, Program: yes, Axis control: yes, Work piece width min-max mm: 3, Min.-max. workpiece height in mm: 3, Sanding hight mm: yes, Schleifaggregate links : yes, Schleifaggregate rechts : 2300 , Transverse sanding units: 80, Abrasive belts at bottom: 120, Surface sanding units: 250, Year :1990

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000

KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 CE- marked Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200mm - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely re ...