profile drilling used for sale

6 adjustable spindles, pedal operation, drilling range 3-14mm, ...

Equipment / other information: 11xdrills & trolley

TBT M1-4-320 4-Spindle deep hole boring machine, gundrilling interesting price Mimu Machine Tools (Italy) - Note: in our warehouse Mimu Machine Tools (Italy)

Control: HEIDENHAIN TNC 360 Operating hours: 14112 Technical data Spindle nose:: SF 32 Drill capacity in steel: 30 mm Threat cutting in steel M: 20 Spindle stroke: 210 mm Taper in spindle: Fehlmann SF 32 Spindle speeds :stepless from: 50 rpm up to: 7100 rpm Table length: 1570 mm Table width: 500 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 720 mm Longitudinal travel: 850 mm Transversal travel: 435 mm Vertical travel: 590 mm Feeds: X,Y 1 - 8000 mm/min Table load max.: 250 kg Voltage 50 Hz 3x: 380 Volt Power: 5 kW Machine´s weight about: 3000 kg Overall dimensions machine: Length: 3100 mm Width: 2200 mm Height: 2500 mm Various accessories: Dividing attachment 4th axis Coolant system Quick change device Tool holder deposit Lamp Set of toolholders Handwheel electroinic

CATALOG NUMBER 6059 TECHNICAL DATA - number of horizontal spindles 2 × 20 pieces - number of vertical spindles 1 × 20 pieces - spacing of extreme spindles 610mm - spacing between spindles 32mm - stroke of the feed cylinder 60mm - max. length of the workpiece: 3400 mm - adjustment of horizontal spindles up / down, front / back - right / left adjustment of vertical spindles - possibility of working on each drilling apparatus separately - right drill - left, threaded (screwed) - 3 pneumatic clamps - engine power 4 × 1.85 kW - air demand 6-8 bar - dimensions length / width / height 4600x1180x2200mm - weight about 1500 kg Net price: PLN 18 900 Net price: 4345 euros depending on the price, 4.35 euros (Prices may vary with higher fluctuations)

TECHNICAL DATA: Boring spindles: 39 Interaxis between spindles mm: 32 Pneumatic clamping: 4 Total connection KW: 4,6

Description Universal CNC deep hole drilling machine from Degen suitable for tooling, fixture construction, training as well as mold making Travel 750x700x600mm Control SIMATIC OP17 Technical data Universal deep hole drilling machine DEGEN UTB 600 E X,Y manual Z, NC control Axes with digital display Drilling depth max. 900 mm max. drilling diameter 25 mm Spindle holder MK2 Spindle drive 2.6 kW Spindle speed max. 3000 rpm Table adjustment lengthways 750 mm Table adjustment Cross 700 mm Drilling unit vertical 300 mm Drilling swivel +/-20° Table area 650 x 1100 mm Table swivelling by 360° Table load max. 2000 kg 2 separate cooling systems - Spray mist (single-lip deep drills) - Drilling emulsion (spiral drilling) With accessory package and glass protection

Radial drilling machine #5292 Power:16 kW Drilling Capacity: 100 mm Arm Length: 2100 mm Arm Travel: 1500 mm Weight: 13 t

Technical data Table length: 760 mm Table width: 400 mm Clamping surface: Length: 600 mm Width: 320 mm T-channel width: 12H8 mm Height of table above floor: 810 mm Drill capacity in steel: 23 mm Threat cutting in steel M: 18 Drill depth (spindle stroke): 120 mm Max. distance from table to spindle nose: 110 - 570 mm Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 300 mm Vertical travel (z axis): 460 mm Spindle speeds: stepless from: 45 rpm up to: 4000 rpm Vertical feeds: from: 0 mm/min up to: 800 mm/min Quill feed speed: number (steps): 6 from: 0.04 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2050 kg Overall dimensions machine: Length: 1700 mm Width: 1400 mm Height: 2100 mm Various accessories: Threading device Lamp Quick change device Set of clamping tools Digital readout number of axis:: 2 Manufacturer: ACU RITE Spindle brake Turret s ...

Tool holder: MK 2 Drilling capacity: 18 mm Speed range, infinitely variable: 200 - 3600 rpm Spindle stroke: 95 mm Table size: 310 x 220 mm Outreach: 215 mm Column diameter: 75 mm Engine power: 0.55 / 1.1 kW Connection: 380 V / 16 A Weight: 95 kg Dimensions LxWxH, approx.: 700 x 450 x 880 mm Facilities: - Stepless speed adjustment - Drilling depth stop - Speed display - Drilling chuck Albrecht 3-16 mm Note: The column sinks into the table.

Column drilling machine with cross table Manufacturer: Helgerit / Perfect Type BF40VS Tool holder MK4 automatic feed Handwheel for fine feed Stageless speed control Digital rev counter 2 Pole motor 2 gear gearbox lighting Notaus Special price

Paper drilling machine Dürselen Corta PB 04 N; good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke onestellar; Max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; optional with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind drillers 42mm; sliding table; hole distance 31.7-293mm; for oiption with 7xFilofax drilling head.

Radial drilling table Dimensions LxWxH 600 x 750 x 550 mm Tilting 0o - 90o This radial drilling table is unused

double head paper drilling amchine

- Drilling capacity into full steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Pinolene stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle - table 300 / 700 mm - Drilling radius min. / max. 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx.B 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. Columns + boom clamping - Coolant device

Drilling machine Reichenbacher Drilling machine with 3 drilling units from above Transmission width maximum 1400 mm 3 motors adjustable to the full width Motor strength 1.5 kW each Motors can be switched individually Lifting / lowering of the drill bar pneumatically foot-operated Maximum pass-through height 400 mm 2 pneumatic workpiece holders adjustable on machine table Drill distance minimum 180 mm Drill distance maximum 1200 mm dimensions 2600 mm x 2100 mm x H 1700 mm

Drilling capacity: 13 mm Throat: 180 mm Spindle taper: 2   MACH - ID 6106 Make:MAXION IXION Type:BT 13 P YOP:2003 Max. drill Ø stee    l13 mm Max. drill Ø cast     15 mm Stroke pinole           70 mm Throat        180 mm Column sleeve        65 mm Spindle TaperMk    2 ISO/Bt/Mk Speeds / ranges        240 - 4000 Rpm Table Length            230 mm Table Width              170 mm Power                        0,75 kW Max. distance spindle – table        275 mm Dimensions Length    400 mm Width      500 mm Height  &nb ...

Drilling capacity: 15 mm Throat: 180 mm Spindle taper: 2   MACH - ID 6105 Make:MAXION IXION Type:Unimax 1 Frequenz YOP:2014 Max. drill Ø steel    15 mm Max. drill Ø cast     18 mm Max. tap ØM           12 M Stroke pinole           80 mm Throat        180 mm Column sleeve       65 mm Spindle Taper         2 ISO/Bt/Mk Speeds / ranges       4000 Rpm Table Length           250 mm Table Width             220 mm Power                       1.1 kW Max. distance spindle – table        380 mm Length&nbs ...

Drilling capacity: 32 mm Radius: 1000 mm Spindle taper: 24   MACH-id    5451 MAKE         MAS Kovosvit TYPE           VO 32 YOP             1992 SPECIFICATIONS Arm Length        1000 mm Max. drill Ø cast         40 mm Max. tap Ø        24 M Stroke pinole          250 mm Max. distance spindle - table         270 mm Min. distance spindle - table         1040 mm Floor / table area          1150 x 800 mm Speeds / ranges            4500 Rpm Spindle Taper           4 ISO/Bt/Mk Column sleeve          300 mm Power&nbs ...

specifications Number of drills: 23 Drilling distance mm: 32 Maximum drilling depth mm: 55 Dimensions of the work table mm: 960x3000 Power KW: 1.5 Weight kg: 320 02 Attacks with stop profile

Drilling capacity: 32 mm Throat: 0 mm Spindle taper: 150   MACH-id    5460 MAKE        Alzmetal TYPE          Alzrapid 32 YOP             1998 SPECIFICATIONS Max. drill Ø steel      32 mm Max. drill Ø cast       40 mm Max. tap Ø      24 M Arm Length    725 mm Stroke pinole        150 mm Throat       400 mm Spindle Taper      4 ISO/Bt/Mk Speeds / ranges        3000 Rpm Table Length        1175 mm Table Width          525 mm Power       3 kW DIMENSIONS Length        2600 mm Width         2000 mm Height    &n ...

Boring diameter capacity: 100 mm Drilling radius: 3000 mm Work-piece height range: 440-2100 mm Spindle taper: MT 6 Spindle turning speed range: 18-1800 rpm Quill stroke: 400 mm Surface area: 3160x1500 mm Boring feed range: 0,0375 - 2 mmm/min Distance spindle - column: -Min.: 400 mm -Max.: 2850 mm Total power requirement: 13 kW Machinery dimensions: 4390x1550x4130 mm Machinery weight: 13200 kg

Drilling capacity: 40 mm Radius: 1200 mm Spindle taper: 280   MACH-id    5351 MAKE         Giovanni Breda TYPE           R 40 - 1200 YOP             1990 SPECIFICATIONS Arm Length        1200 mm Max. drill Ø stee      l40 mm Max. drill Ø cast       50 mm Max. tap Ø          M 45 M Stroke pinole         280 mm Max. distance spindle - table         450 mm Min. distance spindle - table      1330 mm Floor / table area           1960 x 840 mm Speeds / ranges         1800 Rpm Spindle Taper ISO/Bt/Mk          4  ISO/Bt/Mk Column sleeve ...

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 300   MACH-id    5343 MAKE        Reform Germany TYPE          RB 16/50 YOP            2013 SPECIFICATIONS Arm Length         1600 mm Max. drill Ø steel     50 mm Max. drill Ø cast         60 mm Max. tap Ø        M 60 M Stroke pinole      300 mm Floor / table area        1750 x 980 mm Speeds / ranges        2000 Rpm Spindle Taper ISO/Bt/MkMk        5 ISO/Bt/Mk Column sleeve           280 mm Quill Ø    70 mm Power    6.5 kW DIMENSIONS Length       2400 mm Width      & ...

GE 1085 HP (809 kW) High-Torque, series wound, DC drilling motor Horizontal, drip-proof fully guarded, blower ventilated

X travel: 6300 mm vertical travel Z: 1700 mm transversal travel RAM Y: 1000 mm Ortogonal head, 2 spindles Automatic head rotation 1°/1° with hirt spindle taper ISO 50 CNC Heidenhain Machine in good working conditions

Drilling capacity: 100 mm Radius: 2200 mm Spindle taper: 110   MACH-id     5304 MAKE          SAS Torino TYPE            TM 1900 YOP               1981 SPECIFICATIONS Max. drill Ø steel    100 mm Max. drill Ø cast      100 mm Stroke pinole            550 mm Throat       2400 mm Column sleeve      500 mm Quill Ø       110 mm Spindle Taper ISO/Bt/Mk         6 ISO/Bt/Mk Speeds / ranges        1275 Rpm Table Length          2215 mm Table Width            1180 mm Power        11 kW Max. distance spindle - table  &nbs ...

Drilling capacity: 40 mm Radius: 1000 mm Spindle taper: 60   MACH-id     5301 MAKE          MAS Kovosvit TYPE            VO 32 YOP              1993 SPECIFICATIONS Max. drill Ø steel        32 mm Max. drill Ø cast         40 mm Max. tap  Ø     20 M Arm Length        1000 mm Stroke pinole        250 mm Column sleeve        220 mm Quill Ø    60 mm Spindle Taper ISO/Bt/Mk       4 ISO/Bt/Mk Speeds / ranges       4500 Rpm Table Length           1150 mm Table Width             800 mm Power         ...

Drilling capacity: 60 mm Radius: 1600 mm Spindle taper: 48   MACH-id   422 MAKE        MAS Kovosvit TYPE          VO 50 YEAR          2003 SPECIFICATIONS Arm Length      1600 mm Drilling capacity     60 mm Drilling capacity steel Ø    50 mm Drilling capacity cast iron Ø   60 mm Tapping M    48 Spindle taper Mk  5 Spindle diameter Ø   55 mm Spindle travel    310 mm Floor / table area      1470 x 986 mm Power      6 kW Spindle speeds / ranges    2500 Rpm DIMENSIONS Length      2900 mm Width        1120 mm Height       3390 mm

specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg

Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Drilling capacity: 40 mm Throat: 300 mm Spindle taper: 3   MACH-id    4102 MAKE        IBARMIA Spain TYPE         SX 32 YEAR        1996 SPECIFICATIONS Drilling capacity      32 mm Drilling capacity steel Ø   35 mm Drilling capacity cast iron Ø   40 mm Tapping M  18 Spindle taper Mk   3 Spindle diameter Ø  125 mm Spindle travel    150 mm Max. distance spindle - table   300 mm Floor / table area    400 x 420 mm Power       1.1 kW Spindle speeds / ranges      1450 Rpm DIMENSIONS Length       600 mm Width        1100 mm Height       2200 mm

Drilling capacity: 50 mm Radius: 1600 mm Spindle taper: 0   MACH-id   3997 MAKE   MAS Kovosvit TYPE    VO 50 / 1600 YEAR    1995 SPECIFICATIONS Arm Length    1600 mm Drilling capacity   60 mm Drilling capacity steel Ø 50 mm Drilling capacity cast iron Ø  60 mm Tapping MM   50 Spindle taper Mk   5 Spindle diameter Ø  55 mm Spindle travel   310 mm Floor / table area    1470 x 986 mm Power    6 kW Spindle speeds / ranges    2500 Rpm DIMENSIONS Length   2900 mm Width    1500 mm Height   3200 mm

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping  ...

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good  ...

Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Code 171314 Description Controlled rapide radialdrilling machine Make DONAU Model DANUMERIC 340 Serial No. 6110 – 3 Year 1995 Control Donau Drilling cap. in St. 60 in full 40 mm Drilling cap. in Castiron GG 22 in full 50 mm Thread cutting in St. 60 M 36 Thread cutting in Castiron GG 22 M 45 Spindle taper ISO 40 Spindle speeds stepless 15 - 2800 rpm Quill movement 200 mm Feeds stepless 5 - 2000 mm/min Min/max radius of spindle 540 / 1590 mm Working surface table 1800 x 600 mm Min/max height spindlenose / top of table 85 / 695 mm Motor 5,5 kW 400 V Dimension 1800 x 2500 x 2300 (2700) mm (L x W x H) Weight 2900 kg Accessoiries Position controlled in X – Y – Z and spindle Coolant Machine can also be used without control Condition Machine is in very good condition

Drilling capacity: 36 mm Drilling depth: 0 mm Spindle taper: 0   Number of drilling spindles: 0   MACH-id    3627 MAKE         IXION Auerbach TYPE           TL 1004 YEAR         2009 SPECIFICATIONS Drilling capacity    6 - 32 mm Drilling capacity steel Ø    6 - 32 mm Drilling capacity cast iron Ø    6 - 46 mm Spindle taper Mk    ISO 40 Power   7.5 kW Spindle speeds / ranges    4000 Rpm DIMENSIONS    Length    4000 mm Width      6600 mm Height      2300 mm Capacity X           &n bsp;    : 1000 Y                 ...

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition

Code 5284 UMSCHREIBUNG CNC Bohrmaschine Fabrikat Okuma Typ DCN - 4 Maschine Nr. 55020239 Steuerung OSP - 330 Diameter Aufspantisch (4x) Ø 400 mm Einbauhöhe Tisch-Spindel 400 – 200 mm Spindel Hub 200 mm Schnellgang vertikal 12.000 mm/min. Vorschübe 5 – 1200 mm/min. Spindeldiameter 45 mm Spindelaufnahme MK 3 Anzahl Spindelstufen 8 Stufen Geschwindigkeiten 125 – 3150 UpM Anzahl Werkzeugaufnahmen 10 St. Motor 1,5 kW 380 Volts Maschinemasse ( L x Br. ) 1540 x 1750 mm Höhe 2100 mm Gewicht 2000 kg Zustand normale Zustand

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

LAUTENSCHLÄGER pneumatic hold-down, pressure device, steaching rulers ---------- Technical data ---------- Number of spindles: 8 pieces ; TOP! Workshop tested & ready for immediate use

bore capacity in steel (diameter): 30 mm x-travel: 850 mm y-travel: 435 mm Control: HEIDENHAIN TNC 150 total power requirement: 16 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A Year 1985 Serial No. 16 085 109 _______________________________________________________________ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle tape ...

spindle diameter: 125 mm x-travel: 710 mm y-travel: 400 mm z-travel: 200 mm table-size: 1000x630 mm turning speeds: 0-2240 U/min power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3,0x2,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.