We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Fit the PVS 125 or 150 mm Reework construction group or simply to fit in the Exchange or replacement for food TEC / Busser / Stephan / Dacia / or similar Reeworkanlagen for the bread / baking / food industry for the production of bread mash or similar products
used
Dosing quark balls or spray-moulded portioners is used for the portioning of small quantities of homogeneous masses for the fuelling of patisserie products in small volume production,all in manual operation. Robust dose quantity infinitely adjustable. All parts made of stainless steel or food-grade plastic that come with the fuel mass in a friendly. weight of the frame 1.4kg mass: approx. 300Bx430H in mm. with stainless steel stand very good condition!; available immediately!
used
Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...
used
Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control
used
Stainless steel containment system Glove Box with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used, as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178407 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1000 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.4 L oil; 3000/113 rpm 4x Load cells "Fli ...
new
Duration / ALB ear power 30/35 mm thread cutting capacity Max M24 (Steigungsabhängig) hand-reversing switch for forward link. Undervoltage, thermal overload protection, spindle MK 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [BxL] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment Table height with rack and pinion motor three-phase of 400 V pole changing bar 1,5/2 kW spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years delivery: immediately, free delivery loaded: free House including packaging not the right machine? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
used
Capacity: 4000-6000 cups / h Lane: 4-lane longitudinal machine Required air pressure: 5.000 l / h Main filler: - for liquid products -filling range 100-500 cm³ -cleaning: CIP able Actual Cup Size: Ø 95 mm height 70 mm Max Cupsize: Ø 95 mm height 100 mm Power: 380 V / 10 A / 3.5 kW Condition: general overhauled
used
FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...
used
Komatsu 6D95L-1, 6-cyl. Diesel engine water cooled, 4,900 cc displacement, complete, runs. Diesel engines 1-6 cyl., various products: Deutz, Daedong, Hatz, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5 kw upwards, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.
used
Bowl sealing machine TVG Sealpac 750 with vacuum/gas technology Traysealer for MAP products with or without tools (Tools can always be evaluated on request) -227mm X 178mm -230mm X 145mm -178mm X 137mm Machine is ready for use and in very good condition The machine is short frist-available and can be tested in Meersburg
new
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
used
1 used cylinder head for Kubota V 1505 T. no obvious damage. Sale is for recovery without any warranty. Other parts are available. As well as diesel engines 1-6 cyl., various products: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.
used
Planetary mixer RWH 200 - Mixing system mixer mixer stirrer as good as new condition with PLC control and monitor visualization Manufacturer: Mischmischmischtechnik Hoffmann & Partner Type: RWH 200/VA/VA/FU N°: 6150 ; Y.O.M.: 2008 State. As good as new Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation Attachment (batch) size: max. 200 liters with Siemens Symatic Multi Panel Touch / Control / Frequency Inverter with 1x cleaning container and 1x mixing container double-walled for cooling/heating (approx. H-640 mm (without rollers); 650/720 mm) The planetary mixer RWH200 is a mixing system in which eccentrically running mixing tools rotate once around their own axis and additionally around the container axis in the vertically arranged mixing container (exchange c ...
used
Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.
used
High-quality machine for cleaning and separation of finished products such as semolina and vapors of hard and soft wheat, or as a prerequisite for the production of non-slip flours. Bühler Type MQRE. Good condition and ready for use. During overhaul, the actuator is newly stored and all seals replaced. Filter cloths, brushes and both front derailleur to be replaced. Newly painted on request.
used
The BL series machines represent the peak of NERI’s production capability in the field of linear labelers and are the culmination of its many years of experience in selfadhesive application. The main features of these series are the particular balcony construction making extremely easy the clearance procedures, the positive transport system of carton in pitch making the machine completely fail-safe, the ergonomics reducing the accessibility in 70 cm only and dividing the machine in three areas: operative, mechanical and electrical. The BL machines can work in-line with other packaging machines, or as free standing units when fitted with required boxes infeed and outfeed devices. STANDARD FEATURES: Labelling machine balcony construction stainless steel executed. Electrical cabinet on machine board. Behind easy access from behind to electrical and mechanical parts; large door ...
used
Description Filler Handtmann model VF300 is a computer controlled vacuum filler offering very high performance with innovative technical solutions applied. Model VF300 is ideal for the production of meat products and find it applies in large and small manufacturing plants. The device is a very accurate-allows you to achieve the highest quality of the product. Handtmann applied in your device pneumatic lift mechanism for automatic loading. Specification: Brand: Handtmann Model: VF300 Volume: 300 L Dimensions: 2030 x 1750 x 1400 (mm) Power supply: 400V 50 Hz 3N Power: 6.5 kW
used
Description BINDER dosing machine is designed for dosing of liquid and pasty products to finished bags. Dosing machine automatically opens and fills the bag. Specification: Brand: BINDER Model: 871/1 Type: Filling Machine Size: 2200 x 1600 x 1300 (mm) Power supply: 400V 50 Hz 3N Power: 4kW Tank capacity: 75 l Tank pressure: 4 bar Max. temperature: 120 ° C Control: SIEMENS Control Panel Material: stainless steel/steel
used
Corima AEC212 Syringe Labeler and Plunger Inserter with Plunger Unscrambler and Label Easy-Splice It is an automatic, continuous motion machine for syringe plungering and labelling. Main features: • Perfect operational repeatability; • Easy to use; • Minimal installation space; • Designed to manage each component with positive logic; • Totally customizable, with wide choice of optional units (e.g. Vision system, printing systems, feeding systems, etc); • High flexibility and capacity to process glass or plastic syringes. Standard constructional specifications: • Automatic syringe loading on roller conveyor; • Automatic loading of the plungers with elevator and roller conveyor or with vibrating feeder; • No syringe – No plunger loaded; • Totally parameterizable screwing unit; • Plunger assembly control; • External labelling unit complete with unwi ...
used
Portioner/filling station in a good used and functional condition. Suitable for liquid and viscous products. Completely made of stainless steel, rollable, pneumatic contact. Dimensions W/D/H 110/110/140 cm. Operating voltage 400 volts. Workshop-tested, ready for immediate use. More on request.
new
Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .
used
WAUKESHA UNIVERSAL II (U2) model: 030-UII , capacity 8.2 m3/h output pressure 17.2 bar Waukesha Cherry-Burrell Universal 2 Series hygienic pumps with rotating pistons are characterized by reliability, gentle unpulsive pumping of products with a wide range of viscosities. The special rotor profile and fixed cross-section of the working chamber ensure no pulsation, no turbulence and gentle pressing of the product without destroying the structure or desired solids. Unlike cam pumps, the Waukesha pump with rotating pistons has only rotor tolerances to the stationary body and pump cover. They used a special non-rubbing material of rotors, thanks to which it was possible to significantly reduce internal tolerances. In addition, the seal line is extended compared to ordinary pumps. As a result, reverse leakage is minimized even with low viscosity fluids and the pump runs smoothly ...
new
all stainless steel capacity 300 L. (= ± 10CF) Double Ribbon mixing arm Dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved 2 speeds: 16 en 32 rpm 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: herbs, ingredients, powders,…
used
Whole bagging line for chips potatoes, for dry fruits, vegetables in working conditions. Compused by: Double waiting hopper. Double infeed conveyor. Double weigher for chips potatoes and device for sticky products. Bagging machine with 3 forming tubes for bag width: 130, 150 and 75 mm. Outfeed conveyor. The machine can be check it working. Still installed.
new
Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK ...
used
Yanmar diesel engine 4 TNV 98 T, liquid-cooled, 4-cyl., 3319 CC displacement, 16-valves, turbocharger, Emissioncontrolsystem EM, 62.5 kw 85 PS / 2500 1/min. Diesel engines 1-6 cyl., various products: Deutz, Daedong, Farymann, Hatz, Iseki, Isuzu, Komatsu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Capacity of 4,5-100 kw, used partly as new. Gasoline engines: 1-2 cylinder 3-15 kw B & S, Honda, Kohler, Robin, dsey Wisconsin. Various cooler, starter, alternators, and mufflers in stock, various hydraulic pumps and hydraulic motors.
used
Holy V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixing N.M. Holy b.v. V-mix 25,000 PLR New machine of the mixer is on your products (E.g., particle size, bulk density) and environment (E.g. ATEX zoning) adapted. -Capacity: 25,000 litres water filling -Usable volume: approx. 22,500 litres depending on the product properties -Container, lid, swing arm, mixing screw, spout housing made of V2A -Traverse normal steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified
used
Holy V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixing N.M. Holy b.v. V-mix 25,000 PLR New machine of the mixer is on your products (E.g., particle size, bulk density) and environment (E.g. ATEX zoning) adapted. -Capacity: 25,000 litres water filling -Usable volume: approx. 22,500 litres depending on the product properties -Container, lid, swing arm, mixing screw, spout housing made of V2A -Traverse normal steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Description This is a long gap mill type LGM 4, which can be used for grinding and drying. Origin and Condition The long gap mill was used for several years in our pilot plant as an experimental machine. During this time various products were ground and dried. Technical data Drive power: 18,5 - 55 kW Air volume: 2500 Nm³/h Evaporation capacity: 120 kg/h
used
all stainless steel belt width 640 mm natural gas 16 kW 414 kW heat capacity 3 x 400 V gas pressure 30 mbar
used
Ideal CSR Typ. 201 - 21 wire mesh production line CSR Project Jig welding machine Year of manufacture 1996 Switch / control cabinet kVa125 Made in Germany Control: W/Siemens Handheld Computer Control Mounted In Enclosed Wire Cage Safety Structure The coordinate welding machine CSR 201 is used for resisting point welding of sheet metal and wire products in stencils: Work-piece dimensions: Length max.1800 mm Width max. 750 mm Nldw7 Height max. 200 mm X-axis for driving the welding unit according to the work piece length, with a base frame, hardened liner guides, serrated toothed rack system and servomotor with incremental encoder, travel max. 1800mm programmable, max. Travel speed 1500 mm / s Positioning accuracy +/- 0.2mm Y axis for driving the welding unit according to work piece width, with hardened linear guides, rack system and rotary servo motor with incremental ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used Alpine wet agitated ball mill 90 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close cir ...
used
Manufacturer: Stephan Model: UMM SK40 E GNI Capacity: 120 kg / h Capacity: 30 litres per batch Volume: 40 litres Maximum temperature: 127 ° C This is a used Stephan UMM / SK 40 E vertical machine for cutting, mixing and heating products such as cheese. The machine has a double wall for indirect heating and steam in Duesungen in the pan to heat the product directly. The machines are equipped with a high speed cutter, a slowly rotating agitator and a drain valve to remove the product from the pan. It is a batch process by approximately 6-10 minutes per batch
new
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...
used
Waldys Model: B-188 stretch film wrapper Serial: S26-S252 designed for packaging food products on trays, fruit, veg, meat, fish, cheese, poultry to retain freshness and presentation, min pack dimensions 90mm L x 110mm W x 10mm H, max dimensions 200mm L x 300mm W x 160mm H, width of film 280mm - 550mm2004
new
Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE ...
used
CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition
used
The Brogli machine is suitable for powdered and liquid raw product using heat, pressure and mechanical stirring energy to produce homogeneous products for the chemical, pharmaceutical, cosmetic or food industry. Usable volume: 300 liter, volume tot.: 369 liter, min. volume: 100 liter.
used
ALFA-LAVAL DD500LC high-vacuum deearator for viscous products. Capacity up to 6000 lt/hr. Equipped with internal condensor and mechanical level controller.
new
STYRO-CUT 350 Shredder for Polystyrene specifications Motor power: 5.5 kW / 380 V Throughput: approx. 4 m³ / hour (depending on material and sieve) Speed: 2,900/min. Dimensions: W x D x H: 640 mm x 1,500 mm x 2,400 mm Volume reduction: 70 – 80 % Weight: approx. 170 kg Insertion opening: Ø 280 mm Height insertion: 1,600 mm Granulate size: up to 6 mm STYRO-CUT 350 is a device for shredding (granulating) the polystyrene (EPS). The packaging residues, sections are entered into the insertion funnel and the material is automatically sucked in by the device. The material is shredded by the device in a single step, granulated and filled into bags or transported to the silo. The device reduces the volume by 70-80% and thus also reduces the cost of storage and transport. Un contaminated ESP granules can be reused in the production of new products from EPS. The produced granu ...
used
Vacuum deaerator that removes dissolved or entrained air, prevents oxidation of product and eliminates color and flavor changes. Can be used for liquid products like milkproducts, fruit juices, soft drinks, sauces and so on. Including: Vacuum pump Sihi, (type: LEMA50), product discharge pump, APV WI + 55/35-220 190. Trimod Besta level sensor , interconnecting piping. Including control cabinet with Siemens S5 plc and HMI. HMI programm is running, PLC programm fails. YOM 1997, excellent condition.
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery This used wet agitated ball mill Alpine 132 AHM has been used in recent years as an exhibition machine and demo machine for customer trials. The machine is in excellent condition and is sold with many accessories. Due to its size it´s perfect for lab scale production and R&D tests. The Alpine AHM agitated ball mill is especially suitable for processing both in continuous close ci ...
used
Moulded Cones Machine Steinhoff HWA 54 Steinhoff/GAM/Haas Price: € 9.900 Machines # 79 Built: 1972 Number of baking tongs 21 Products per baking tongs 6 Location: Germany The machine is used to make moulded cones is sold with a tool for tulip squirrels. It is the predecessor of the Steinhoff EWA 65. The machine is currently in storage.
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindric ...
used
ISM Shibaura N843L, 3-cylinder water-cooled diesel engine, displacement 1,662 cc, power 26.1 kw/35 hp/2,700 1/min., functional. We supply diesel engines 1-6 Zyl., various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Performance of 4.5 to 100 kw, used, partly new. Gasoline engines: 1-2 cylinders of 3-15 kw from B & S, Honda, Kohler, Robin, Wisconsin. Various coolers, starters, light machines and silencers in stock, hydraulic pumps and hydraulic motors. Jodau Kommunal-, Umwelt- & Grünpflegetechnik Inh. Joachim Dau 24941 Flensburg, Wieselhof 29
used
Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition
used
The Eillert G-1500 vegetable slicer has been developed for medium-capacity production, especially for vegetable processors. G-1500 is suitable for processing vegetables and producing smaller batches separated from the line, for example in salad factories. The device is used to make complete slices of leafy vegetables such as lettuce, as well as long products such as leeks, Chinese cabbage, beans, etc. The G-1500 slicing machine has a capacity of about 300 to 800 kg / h, depending on the cut and the product. The cutting possibilities of the device are cubes, slices, sticks and segments and it is suitable for use, for example, for leafy vegetables, leeks, carrots, peppers and various cabbages, as well as several different fruits. Capacity: 100 - 600 kg / h depending on the cut and the product. Voltage: 400 V, 50 Hz, 3 phase + PE + PN, 1.25 kW Cutting size: 1-50 mm Belts mu ...
used
STRATASYS OBJET30 PRIME V3 3D PRINTING (year 2015) 3D printing of medical implements that require prolonged contact with the skin, such as headsets or surgical guides. Prototypes of joints, connections and sealants. The Objet30 Prime printer offers 12 different materials so you can create accurate prototypes of consumer products with smooth surfaces and flexible components from your desktop. Printing time: 1102 Specifications: layer thickness 28 microns for Tango materials; 16 microns for all other materials Precision 0.1 mm could vary depending on part geometry, size, orientation, material, and post-processing method model materials Biocompatible (MED610) Material for high temperature (RGD525) Rigid and opaque white material (VeroWhitePlus) Rigid and opaque blue material (VeroBlue) Rigid and opaque black material (VeroBlack) Rigid and opaque gray material (VeroGray) ...
used
PAGO side bottle labeler with Allen printer: Labeling machine for bottles and other products Label height: 80mm Attached with an Allen printer/coder Condition: good