production used for sale

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...

Manufacturer: Uniglass Model: UGTPLUS 1548-1-R Year of Manufacture: 2010 Voltage: 400 V AC Frequency: 50 Hz Control Voltage: 230 V AC / 24 V DC Power Ratings: - Heating Power: 690 kW - Motor Power: 870 kW - Total Power: 1570 kW Certification: CE Marked - the max. oven capacity is 4800x1500mm - the smallest dimension must have a diagonal of 290mm - The furnace can prestress thicknesses from 2.85 – 15mm - Regarding the condition of the system, it must unfortunately be mentioned that the ceramic rollers are in a bad condition Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used Masa Stone Making Line Year of Make: 2001 Consisting of: - Mixing plant - Colormix - Kübelbahn - Stone paver - approx. 3600 production boards 1400x1100mm - Aerial ladder with 22 shelves - Transfer table - Countersunk ladder - Packager - Brettpuff The drying chamber is not for sale Second-hand Masa block-making plant Year of manufacture: 2001 Consisting of: - Mixing plant - Colormix - Bucket conveyor - Block-making machine - Approximately 3,600 production boards, 1,400 x 1,100 mm - Elevator with 22 levels - Sliding platform / Finger car - Descending conveyor / Lowerator - Packager - Board buffer The drying chamber is not for sale

Stone Production Plant Year of Make: 1989 Board pavers from the manufacturer OMAG Simatic S 5 control system with visualization by Frima Board size 1,400 x 1,000 mm Cross cleaning Quick Forming Clamping Pneumatic Drawing plate equipment Circulation Hydraulic pawl feed with proportional valveson wet side Dumping device Lifting ladder with chain transport, 18 shelves and double pusher and collector Vehicle Group Countersunk ladder with 18 levels double joint Hydraulic Stone Remover Hydraulic Stone Doppler Chain conveyor at sorting station and pawl feed at dry side conveyor Film applicator Horizontal strapping Granule spreader Electric Packager Board cleaning brush in V-belt conveyor Board turner Board stacking device for stacking board package transport incl. board buffer; Pre board destacker buffer for 75 boards Board destacking device Board insertion wi ...

missing parts Auction-ID: A1-48980-177

Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 415 kg,

Height=1.3 m, Overall length= 0.9 m, Overall width= 3.35 m, Net weight= 400 kg,

General Description Insulating glass production line manufactured by LiSEC Austria GmbH , comprising automated equipment for the production of double- and triple-glazed insulating glass units. The line includes a vertical glass washing and drying machine, polyurethane sealing system, metering unit and water treatment equipment for high-quality IGU manufacturing. Technical Details Manufacturer: LiSEC Austria GmbH Model: VHW-D20/V6 + DOS-1PUD Machine type: Insulating glass production line Year: 2017 Serial number (DOS-1PUD): 365-094505 Power supply: 400 V, 3/N/PE, 50 Hz Maximum operating pressure (DOS-1PUD): 6.0 bar Maximum glass height: 2,000 mm LiSEC VHW-D20/V6 vertical glass washer and dryer Polyurethane sealing robot LiSEC DOS-1PUD two-component PU mixing and metering system SAF-1000 filter unit GWT reverse-osmosis / water softening system LiSEC iPC-2008 industrial P ...

Year: 2006 technically efficient, ready to work – after full service 3-spindle (high-speed motors) possibility of setting for various profiles (frame / sash) pneumatic profile clamping

- Model: MAX 80 CNP - Manufacturer : Glaston - Year of manufacture : 2015 - Condition: Used Includes water reservoir tanks and cerium mixing tank with all equipment and several consumable spear parts. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Complete beer production and packaging plant available for sale following the closure of an industrial brewery. An excellent opportunity to acquire a comprehensive brewery installation covering the main stages of beer production, fermentation, storage, refrigeration and packaging. Main equipment included: Robix Hungary Kft. ROPPI-1100 - 2-roller malt mill Eco Brew Tech Tino Cottura + Tino Filtro - Automatic brewhouse - 2014 Thermindus GV Insieme - Electric steam generator - 2014 Eco Brew Tech Fermenter 2,731 L - Fermentation and maturation Unitanks - 2014 - 3 units Eco Brew Tech 2,200 L - Mixing tank with agitator - 2014 Céspedes / Idrotecnica S.r.l. - Automatic isobaric filling and capping monoblock - 2014 Céspedes S2/Z - Automatic labelling machine - 2014 Keyter KWF Series - Industrial glycol chiller - 2018 The installation also comprises additional stainless steel tan ...

Bread loaf forming line composed of: -Weigher / divider / girder: For all types of dough (year 2007) Automatic lubrication system. Adjustable weight. from 60 to 600 grs. Speed variator. 40 kg hopper for dough, made of stainless steel and non-stick material. Flour sifter. Digital parts count. -400-basket resting chamber, manufactured in 2004. Adjustable time. -Bread loaf former, made in 2004 tape width: 600mm

Complete professional oil mill & filling line incl. labelling technology, raw materials & bottle storage – turnkey For sale is a complete, professional production and bottling plant for cold-pressed edible and specialty oils. Ideal for farmers, direct marketers, founders or existing farms who want to set up or expand their own oil production. The package is perfectly matched to each other and enables immediate production to start from seed to the finished labeled end product. 1. Machinery & Production Technology - NF 500 oil press with infinitely variable speed control (year of manufacture 2020). Manufacturer: Nature Fuel Osnabrücker Ölmühle GmbH & Co. KG - Chamber filter press KKF200/10-2 (built in 2025, as good as new). Manufacturer: Oil press GmbH & Co. KG - Pneumatic oil filling machine (100 ml – 1000 ml) - Stainless steel container 590 liters with l ...

Fully automatic assembly and packaging line for the production of Hydrobox assemblies. The special system consists of extensive conveyor technology with roller and belt conveyors, separation and buffer systems, automated packaging stations, test modules as well as safety and control technology. The system was specially developed for a continuous production process and is suitable for industrial assembly, packaging and material flow applications. Technical data Manufacturer of the entire system: Dreisbach & Jungmann GmbH & Co. KG Machine name: Hydrobox production line Plant type: Assembly and packaging line Year of construction: 2020 Machine number: 010820 Mains connection: 3/N/PE, 400 V AC, 50 Hz Connected load: 18 kW Connection current: 32 A Control voltage: 24V DC Compressed air connection: 6 bar Plant components Fully automatic roller conveyor t ...

Year: 2007 - technically efficient, ready to work – after full service - SV 530 cleaning machine - AKS 1610 welding machine - TBA-F 26/25 cooling station - WT 530 turning station - Welding dimensions: 2300 x 3500 mm - Flash limit: 0.2 – 2 mm - Seal formers

URBAN AMS 6010 very good condition fully operational

Fully automatic assembly and packaging line for the production of Hydrobox assemblies. The special system consists of extensive conveyor technology with roller and belt conveyors, separation and buffer systems, automated packaging stations, test modules as well as safety and control technology. The system was specially developed for a continuous production process and is suitable for industrial assembly, packaging and material flow applications. Technical data Manufacturer of the entire system: Dreisbach & Jungmann GmbH & Co. KG Machine name: Hydrobox production line Plant type: Assembly and packaging line Year of construction: 2023 Machine number: 060722 Mains connection: 3/N/PE, 400 V AC, 50 Hz Connected load: 18 kW Connection current: 32 A Control voltage: 24V DC Compressed air connection: 6 bar Plant components Fully automatic roller conveyor t ...

Auction-ID: A1-49926-20

Manufacturer: Bottero Model: TRANSFER 500P Year of Manufacture: 2018 Voltage: 400 V Frequency: 50 Hz Rated Current (In): 3 A Mass: 1000 kg Minimum size : 140mm Max. size : 2000mm Thicknesses from 3mm – 19mm Titan 222L They have also ground 2mm glass several times. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=6 m, Overall length= 21 m, Overall width= 3 m, Fritsch Euroline transporter. Spreading transport table.

Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Producer: Eberhardt condition: refurbished In stock Made in Germany Description In excellent working condition fully refurbished bun rounder Eberhardt Piccolo 4 can divide and process even the most sticky soft dough – Easy to clean removable top cover – Rust-resistant light metal cutting head – Dimensions 6359134 cm – Power 0,55 kW – Voltage 400 V amperage 1,7A – 30 divisions processing 40-135 g dough pieces – 3 moulding plates included

Year: 2006 - technically efficient, ready to work – after full service - possibility of mounting 3 milling heads - top and bottom chiseling - control via PLC - automatic machining process

Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms

Year: 2007 - technically efficient, ready to work – after full service - disc cutter: 250 mm - 4 CNC axes - working height: 200 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/outfeed table

Year of construction 2012 Siemens Control 840D Remote diagnostics and teleservice On-screen maintenance instructions 5-axis milling package Rigid table with integrated rotary table Kessler DTE 520 max. speed 1000 rpm Travel X/Y/Z 2000/685/630 mm NC swivel head with headstock NC swivel axis +- 100° - direct measuring system Speed range 20,000 rpm Direct displacement measurement systems Tool changer with 92 places Rapid traverse 40 - 40 - 40 m/min Axle acceleration 0.25 g Chip conveyor (hinge belt) Coolant system HL 450 / 900 (IKZ) Chip gun Coolant recooling unit Additional tub flushing Machine preparation for air through the spindle Extraction for the working area Safety package MILL 2000 reinforced cab with safety washers Zero-point clamping system NSL tur 570-5-Z for DTE 520 Mitfahrende Chiron Lasercontrol Single F295 Tool breakage detection Probes Renishaw OMP ...

Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table

Angle system SCM Windows and doors manufacturing system Type MULTIFLEX C Year of construction 1992 Aggregates as follows Cross-cut saw motor power 3 kW Slotted spindle motor power 7.5 kW Profile spindle motor power 5.5 kW Profile spindle motor power 5.5 kW Glass bead saw motor power 2.2 kW Minimum workpiece width 35 mm, maximum workpiece width 140 mm Milling spindle diameter 50 mm Maximum clamping length 320 mm Feed speed 3-15 m/min. Feed motor 0.75 kW Spindle diameter glazing bead saw 25 mm Swivel control panel with electronic control Memory capacity of up to 100 programs The height adjustment of the journal and profile spindles is carried out by means of an electronic positioning device with 3 axes Automatic Rolling Table with 2 Speeds In a compact design With pull-out workpiece support With workpiece return No tools required Space requirement 3860 mm x ...

Used GEA Finnah model 2209.014 cheese production and packaging machine. New: 2000. Maximum capacity: 8x28x60 = 13,440 cph (28-30 staples/min) Capacity: 150 g (120 g, 200 g) Product: cream, homogenised cheese Filling: aseptic Voltage 230/360 V 50 Hz Pressure 8 bar

Extruder for the production of packaging chips built in 1994

Eagle Pro Pack 240 PRO – Advanced X-Ray Inspection for Packaged Products, The Eagle Pro Pack 240 PRO is a high-performance X-ray inspection system designed for maximum product safety, quality assurance, and production efficiency., Ideal for food, pet food, pharmaceutical, and consumer goods applications,, this system combines cutting-edge detection technology with robust industrial design., ---------------------------------------------------------------, Key Features & Benefits, - Reliable detection of foreign contaminants, even in dense or metallized packaging, - Multiple quality checks in a single inspection, - High inspection accuracy at high production speeds, - Hygienic, stainless-steel construction for demanding production environments, Technical Specifications, Inspection Area, - Maximum inspection width: up to 242 mm, - Maximum inspection height: up to 101 mm, - Conveyor width: ...

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

technically efficient, ready to work - after full service bar spacing: 100 mm dimensions: 265 x 265 cm height: 150 cm weight: 350 kg

Year: 2018 technically efficient, ready to work – after full service hydropneumatic head feed with automatic profile height measurement automatic zeroing after the end of the work cycle double vertical and horizontal pneumatic clamps minimum internal pack dimension: 450 mm maximum internal pack dimension: 2740 mm

Labeling machine for top and bottom, with a ZODIAC printer for the top labels.

Year of manufacture 2005 Stitching, folding and cutting unit 304 QSM 3-side trim Shed display Marking device Delivery date: immediately Price on request. Worldwide delivery & installation.

Proseal Fastpack F40, Manufacturer: Proseal, Model: Fastpack F40 with printer, Application: Top seal tray sealing only, Condition: Used – in good working condition, Description, The Proseal Fastpack F40 is a compact high-speed inline traysealer designed for reliable and consistent top sealing of pre-formed trays. This machine is widely used in the food industry and is known for its robust construction, hygienic design and stable performance in continuous production environments., Key Features, - Top seal traysealer, - Inline, high-capacity design, - Stainless steel construction, - Fast and easy tooling change, - PLC controlled with operator HMI, - Stable and reliable sealing quality, - Suitable for high-volume food production

This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information.

This ERREBI TM5 was manufactured in 2000. Designed for wooden pallet and packaging production, it operates on multiple workstations for simultaneous component nailing. Featuring a CNC system, it ensures all movements are controlled with no manual adjustments needed, allowing quick format changes. Optional tools like drills and saws can be added. Contact us for more information about this machine.

Shaoyang Textile Machinery Spunbond nonwoven manufacturing line SxxS , sms , SSmmS, SmmS, Short Description : Spunbond nonwoven manufacturing line SxxS , sms , SSmmS, SmmS, Year(s) : 2020 Quantity : 1 Location : Seller or machines location: MIDDLE EAST Last check : 05 Nov. 2025 This equipment is suitable for the production of spunbond nonwovens with a variety of colors and different properties using PP chips as main material mixed with master batch, antioxigen, anti-pilling agent and flame retardant. SxxS SmmS SSmmS Currently ss (SxxS) only, customer can do sms or ssmms by upgrading parts Platform is ready for additional beams, they can invest in additional parts to producr smms or ssmms The line can be configured to ve extended to produce high grade fabrics (add additional beams to producr more protective layers) Ⅰ. Application This equipment is suitabl ...

This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine.

This SORBINI SmartCoater SP1 was manufactured in 2009. It features a working speed of 5–20 m/min and can handle workpiece widths up to 1,350 mm and thicknesses up to 100 mm. It includes SUPERFICI UV lamps and a VENJAKOB conveyor belt, enhancing its efficiency in wood production. For more information about this machine, please reach out to us.

2 DC 8/32 towers, each with 8 stations, suction feeder, DBM 120 stapling and folding unit, DBM 120T trimmer, stacker System 5000

This MAQUINARIA LDM VPS 2103 was manufactured in 2020. An industrial automated system for wood production, it features a hydraulic nailing system, chain-driven pallet transport, and servo motors for precise block positioning. It operates on 220V or 380V and handles pallet widths from 800 mm to 1500 mm. Safety certified under EN 12100 standards. Contact us for more information about this machine.

Year: 2003 technically efficient, ready to work – after full service flash limit: 0.2 – 2 mm maximum welding dimension: 2400 mm support path programmable PLC controller automatic welding process

Code: 0321 Brand: SCM Model: MULTIFLEX C - CE Standard Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 - CE Standard Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 200 ...

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction ro ...

Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...