production used for sale

half size 2 colors with perfecting in production in PRODUCTION

Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK) Year of manufacture 2007 Operating hours 11,970 hours, as of March Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200  ...

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wartsila in end of year 2010 and it was commissioned in 2011 as a turn-key project with heat recovery system for 10 bar steam production. Fuel used in this plant was normal natural gas fed from a local pipeline. The plant was operated till 2021 having total operating hours 43’767 till shutting down. Complete plant with step up transformer, lube oil system, control panels, and synchronizer panel, USP systems, operating monitors, MCC, start system and air compressors, HRCS for 10 bar steam, exhaust system, 6 kV Vacuum breaker with synchronisation, manuals and drawings. Plant is still installed, and electric power is still connected to all devices. Wartsila Service has made all scheduled services for this engine, last 40’000-hour service just 3000-hour prior operation closing in 2021.  ...

Pressquick PQ6-SU, Dry Cell TS-120, Lifting Kneader Type Diosna 120, Pressquick PQ3-SU Daily capacity approx. 500 kg . Drying 100 baskets . Ideally suited for larger farm shops, market drivers, egg producers. Also for delicatessen manufacturers for the production of special noodles. All spare parts available. German premium quality. To be sold against self-dismantling . Due to a lack of personnel, the plant did not go into production.

Quadro Comil, model 194S, stainless steel construction, Eex FLP, 5 hp, 380/415 volt. Complete with 6 x interchangeable screens, mobile on castors. this extra information is standard for this model. Please always double-check the details during a visit The Quadro Comil 194S Mill is a high-performance pharmaceutical milling machine designed for the size reduction and dispersion of pharmaceutical ingredients. Built with precision engineering, this model is renowned for its efficiency, versatility, and reliability in pharmaceutical processing operations. Equipped with a proprietary conical screen milling technology, the Quadro Comil 194S Mill ensures uniform particle size reduction and distribution, resulting in consistent product quality and potency. Its innovative design features a vertically oriented rotor and a conical screen chamber, allowing for efficient material processing a ...

Breddo LORWW Liquifier, Stainless, 50gallon liquifier, 200L jacketed mixing vessel, Motor 25Hp, 3Ph this extra information is standard for this model. Please always double-check the details during a visit The Breddo LORWW Multishaft Mixer is a cutting-edge pharmaceutical machine designed to meet the rigorous demands of modern pharmaceutical production processes. With its innovative design and advanced features, the LORWW Mixer offers unparalleled mixing performance, efficiency, and versatility. Equipped with multiple independently controlled shafts, the LORWW Mixer ensures thorough blending and homogenization of pharmaceutical ingredients, including powders, granules, and liquids. Each shaft is equipped with precision-engineered mixing elements that facilitate gentle and uniform mixing, minimizing product degradation and ensuring consistent product quality. The LORWW Mixer fe ...

It is an automatic hot air welding plastic pipe filling and sealing machine. (Metal tube option) The design principles, the materials used and the innovative concepts guarantee maximum productivity, ease of use and quality, making this machine the ideal solution for the pharmaceutical and cosmetics market. The group layout allows for easy adaptation to a wide variety of tube filling problems. Particular attention was paid to the quick changeover to different tube sizes and the consistency of the filling material. AREAS OF APPLICATION: Pharmaceuticals, chemicals, cosmetics, food, dietetics, medical devices, manufacturing. MAIN FEATURES: Easy-to-use tube filler with quick format changeover. Excellent access for cleaning and maintenance. Fast interchangeability of formats. . The machine is equipped with a pipe form with a diameter of 50 mm, other parts in tubular format are also ava ...

We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...

BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in Switzerland. Designed for even the most intensive machining, the machine uses an extremely stable 3 kW laser beam, whose excellent parameters ensure the highest energy efficiency while maintaining low operating costs. Additionally, in order to meet any production challenges, the process of loading and unloading the workpieces can be performed during the cutting process, which significantly increases production efficiency and reduces machine downtime to a minimum. The offered BySprint 3015 laser cutting machine has been regularly serviced and its total weight is approximately 12000 kg. Technical specifications of the BYSTRONIC BySprint 3015 laser - laser beam power: 3 kW - laser beam power adjustment range: 150 – 3000 W - work area (L x W): 3048 x 1524 mm - maximum sheet metal dimensions (L x W): 3000 x 1500 mm - ...

Featured Listing: INVPACK MVA12 - High-Speed Packaging Machine Unlock unparalleled efficiency and precision with the INVPACK MVA12, a standout model from INVPACKs lineup, crafted with meticulous attention to detail in 2019. This machine not only represents the pinnacle of packaging technology but also boasts an exceptional condition that rivals new models, making it a valuable addition to any high-volume production environment. Key Highlights: Pristine Condition: Despite its prior use, the INVPACK MVA12 is in remarkable, like-new condition. It has been meticulously maintained and has logged only 390 hours of operation, demonstrating minimal wear and a long service life ahead. Exceptional Productivity: Designed for operations that demand both speed and reliability, this machine delivers an impressive output of 15 doses per second. It is engineered to keep up with the rigorous pa ...

This ENGEL e-motion 2440/380 T Injection moulding machine was manufactured in the year 2017 in Austria and has 50249 production hours. It is equipped with a Engel CC300 control unit. The machine is all-electric and energy efficient. It has fast, dynamic, and highly precise movements through a five-point toggle lever clamping system with low friction platen guidance on precision linear bearings. The machine is still at the production and can be checked upon request. Full service documentation and manuals.

Bench top high shear granulator/mixer for R&D laboratory usage and small batches; designed for processing of small batches and has the flexibility for scale up. Equipped with 3-blade design with speeds from 50-750rpm; colour touch screen operator interface, the KG-5 is easy to use and generates meaningful product performance data; propeller has a 3-blade design with speeds from 50-750rpm; variable speed chopper (1,000-10,000rpm) and a liquid addition system; standard printer output for recording recipes and parameters from automatic operations; quick release components to facilitate easy cleaning; this extra information is standard for this model. Please always double-check the details during a visit The KEY KG5 High Lab Small Batch Shear Granulator/Mixer is a cutting-edge pharmaceutical machine designed for precision mixing and granulation of powders in small-scale production envi ...

We offer Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar Bid 1-5 The system is part of a compressed air system in a production hall. It's needed. Built in 2016, and fully functional in very good condition and is offered - due to the restructuring of the hall use at our customer. The compressed air tank is not part of the offer. However, it can also be sold individually or purchased with the system. specifications: - Manufacturer: Kaeser Coburg - Model: Adsorption dryer DC 75e with 2 desiccant tanks Year:2015 - Volume: 133 l - Filling weight: 100 kg - Adsorption Center: Activated Aluminum Oxide Al2O2 - P0 & PS 0/16 bar - TO -10/+66 °C - TS +70°C - PT 26.1 bar - Year of construction: 2016 - Machine No.: 9,5486,20010-1037 - Operating hours: - will be added - Max operating temperature air: 0° C - Ambient temperature 2 - 45°C - DL Inlet temperature min/ ...

RADAELLI DELFINO 3 350T eccentric press built in 1978 in Italy by CUGINI RADAELLI & C, is the perfect solution for even the most intensive mass production of various types of parts. All of this is possible thanks to its extremely high press force of 350 tonnes and extensive machining capabilities, which enable, among others, precise cutting, machining, bending and punching of metal sheets and bands. To further increase production efficiency, the entire process can be fully automated after retrofitting the machine with a decoiler and sheet feeder. The RADAELLI DELFINO 3 H-type press weighs approximately 60 tonnes. Technical specifications of the RADAELLI DELFINO 3 mechanical press - maximum press force: 350 t - work table dimensions (L x W): 2500 x 1600 mm - slider dimensions (L x W): 2500 x 1200 mm - slider adjustment: 200 mm - slider stroke: 300 mm - number of slider strokes: 2 ...

LINE FOR FILLING PET AND GLASS BOTTLES WITH CAPS AND CAPS ALL in ONE Produced until May 2022, taken straight from production by us Can fill PET bottles of various heights, glass bottles with plastic stoppers and glass bottles with caps THE LINE NEEDS RENEWAL, was dismantled from existing production, the owner produced without a PET blow molding machine, ordered ready-to-use empty 1.5 L PET bottles. He also filled 1 L glass bottles on the same line. In addition to the capping machine, it also has a capping machine. The bottleneck is a carbonator (7000 l/h). LINE Consisting of: Filling machine 50 filling nozzles Brand: Winterwerb Type: Combilima Year: 1977: Capacity: 14,000 pcs/hour. Electrical connection:380 V Weight:10600 kg Total dimensions L 5850 mm Total dimensions W 3150 mm Total dimensions H 2300 mm Description Minimum bottle height 150mm; Maximum bottl ...

Used Kosme Filling Monoblock Completely Refurbished in 2016 Introduction to the Kosme Monoblock The Kosme filler a filling monoblock with a 24 24 6 configuration for carbonated and still water stands out for its reliability and high performance capabilities Additionally this machine refurbished completely in 2016 and unused since then ensures optimal working condition Performance and Operational Capacity of the Used filling monoblock Kosme completely refurbished in 2016 This monoblock s operational capacity is remarkable it produces 9000 pieces per hour for 330 ml bottles demonstrating its versatility in handling various bottle sizes ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height Technical Features of the Monoblock Among its key features the presence of an aluminum cap and an effective rinsing system are noteworthy Furthermore the monoblock comes equipped wi ...

This used injection moulding machine was manufactured in 1999. An ARBURG 420C-1000-250, its designed for precision and efficiency in production. Ideal for a wide range of plastic moulding applications, this machine offers exceptional precision and ease of use. This particular machine represents a valuable addition to any production line. Consider the ARBURG 420C-1000-250 machine we have for sale as a strategic investment in your manufacturing capabilities. For further information, please contact us.

This used injection moulding machine was manufactured in 2001 by ARBURG, a leader in the industry. The model 420 C 1000-250 features a clamping force of 1000 kN and weighs 3180 kg, tailored for precision and reliability in production. Notably, it includes handling for enhanced efficiency, making it an excellent addition to any production line. The ARBURG 420 C 1000-250 machine we have for sale stands as a testament to ARBURGs engineering excellence and durability. For further information, please contact us.

Used Bottle Washer Bodini 10 rows up to 4500 bph Efficiency of the Bodini 10 Row Used Bottle Washer up to 4500 bph The Bodini 10 row used bottle washer stands as a dependable choice for bottling operations ensuring a performance of up to 4500 bottles per hour Crafted entirely from stainless steel and featuring plastic baskets this machine offers durability and resilience over time Optimal Performance and Advanced Technology With its step by step advancement of baskets and the use of low pressure steam it guarantees effective cleaning Moreover thanks to integrated automation with automatic bottle loading and unloading manual interventions are significantly reduced maintaining a continuous flow of production Furthermore the label extraction belt further simplifies the cleaning process Kept in excellent condition the machine delivers high performance even after prolonged use Additionally it ...

This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. Its notable for its efficiency and ease of use, designed to streamline manufacturing processes. This DEMAG machine we have for sale represents a solid addition to any production line, enhancing output with its proven performance. Contact us for further details.

For cutting of cabbage, lettuce, leafy vegetable, etc. this extra information is standard for this model. Please always double-check the details during a visit The Kronen GS10 Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 2010, stands as a benchmark in food processing technology, offering unparalleled efficiency, precision, and versatility. This model seamlessly integrates cutting, washing, and blanching functionalities, catering to the diverse needs of modern food production facilities. Equipped with advanced cutting mechanisms, the GS10 excels in slicing vegetables and fruits with exceptional precision, ensuring uniformity and minimizing product waste. Its robust washing system utilizes state-of-the-art technology to thoroughly clean produce, removing contaminants and impurities to uphold stringent food safety standards. The blanching feature of ...

For slicing of cabage, lettuce, leafy vegetable, etc. this extra information is standard for this model. Please always double-check the details during a visit The Eillert G1500 Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 2014, represents a pinnacle of innovation in food processing technology. This model integrates cutting, washing, and blanching functions, offering a comprehensive solution for commercial food production. With advanced cutting mechanisms, the G1500 excels in slicing vegetables and fruits with precision and consistency, minimizing waste and optimizing yield. Its robust washing system ensures thorough cleaning, removing contaminants and impurities to uphold the highest food safety standards. The blanching capability of the G1500 rapidly heats produce, effectively deactivating enzymes to preserve color, flavor, and nutritional integ ...

Weinig Unimat 30 EL four-sided planer - German production - year of production 2001 - for wet wood - pneumatic cushion - counter reading 4808 h - DTR TECHNICAL PARAMETERS: - planing width 300 mm - planing height 200 mm - spindle diameter 50 mm 1 lower spindle 11 kW 2 right spindle 11 kW 3 left spindle 11 kW 4 upper spindle 11 kW cutter adjustable at an angle of 0.75 kW 5 lower spindle 15 kW 6 upper spindle 11 kW - jointer 7 lower spindle 7.5 kW - jointer - spindles with brakes - feed motor 7.5 kW - feed speed smoothly adjustable 6-36 m/min - four pull rollers in the tabletop - six upper steel pulling rollers - three upper rubber pulling rollers - feed on cardan shafts - pneumatic pressure - air cushion in the countertop - automatic central lubrication - minimum element length 700 mm - diameter of connectors 5 x 160 mm, 2 x 140 mm, 1 x 80 mm Machine di ...

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Key data: 3000 kN

Wittmann Battenfeld EcoPower 300/750 / Electric machine / production line with Wittmann W821 robot and conveyor belt Year of construction: 2012 Injection unit: Screw diameter: 45 mm Spray weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Size of clamping plates: 1250x1110 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6S - Touchscreen Additional equipment: Production line with Wittmann W821 robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Perfect technical condition Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 12 Injection unit hardened - Bimetal Automatic tool height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of construction: ...

Key data: 1200 kN

Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel Del ...

Key data: 1100 kN

Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...

Key data: 1000 kN

Engel e-motion 310/100 / Electric machine / production line with the Engel ERC 13/1-F robot Year of construction: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Injection pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 0x0 mm Size of clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Euromap Robot Interface Control with air valve Hydraulic core pull x 1 Control with hot runners Injection unit hardened - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Rob ...

Key data: 62 kN

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of construction: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touchscreen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air Valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor, which is controlled by an inverter – very precise Automatic part feeding with quality control system Machine workstation protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...

Key data: 800 kN

Engel e-motion 170/80 TL / New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of construction: 2020 Injection unit: Screw diameter: 30 mm Spraying weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit : Clamping force: 80 t Tie bar spacing: 0x0 mm Size of clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - Touchscreen Additional equipment: New, unused production line with two Engel Viper 20 and Engel Viper 6 robots and an assembly line with optics Tie-bar-less, electric machine: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot Interface Air Valves Air Core Pulls Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central l ...

Description: AMBROGIO GALLI 40 GAMMA Eccentric Press Line Includes : - n.1 AMBROGIO GALLI 40 GAMMA Eccentric Press Pressure 40 TON Min/max stroke 9/100 mm No. of strokes 80/210 Motor power 2/6 HP Table size 750x450 mm Press size 1500x1500x2900 mm - ISOTEC soundproof cabin Dimensions 1900x1800x3100 mm - n.1 ELMEA decoiler Model SC18A71 production year 1972 Maximum coil size 300 mm Reel holder size 1600x1000x1600 - ELMEA decoiler Model MS10A production year 1997 maximum coil size 300 mm Reel holder size 1500x1300x1600 - Exit conveyor - Electrical panels for press - Protective grills NOT INCLUDED IN THE ITEM NOT INCLUDED : - N.2 feeders for eccentric press - N.1 control/vision for feeders , - No. 1 BRANKAMP process control system - N. 1 packaging exit conveyor weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,500 x 3,500 mm

Key data: 35 kN

SUMITOMO SD35E 35Ton Injection Molding Machine The high-speed injection molding machine for all challenges Manufacturer: Sumitomo Model No.: SD35E 35t Plastic Injection Molding Machine Clamping force: 35 t Power: AC 200V, 30V, 125A Inverter: 21A Heating power: 4.8 KW Weight of the injection compound: With the built-in extrusion screw approx. 100g Included: DRD III Yushkin high-performance robot Year of manufacture: 04/2000 Condition: At the time of shutdown, the machine was in perfect condition while CD production was running There are 2 identical machines available, the price is per machine The machine is currently still tied up in our customer's factory in Bielefeld and will be handed over to our customer due to a restructuring of the production processes. We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex  ...

GUK Fa 50 6+6 cassettes , feeder FL 2 50 , jet lining The machine has new rollers installed in December 2023. perfect condition of the machine Machine ready for production , after factory inspection The machine has the original complete equipment, creasing and perforation tools, original documentation with the declaration of conformity Machine withdrawn from production due to change in assortment. The price includes loading

This injection moulding machine was manufactured in 2022. With a closing force of 15960 Kn and an opening stroke of 2500mm, the Italtech KS 1600/10800 offers precise control and ample space between columns. Featuring a maximum mould thickness of 1600mm, it accommodates diverse production needs. Equipped with a Sepro robot, it ensures efficient operation. Considering its robust build and extensive production hours of 37,546, the Italtech KS 1600/10800 presents a compelling opportunity. Contact us for further details.

DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...

SCHUKO ZM 900-2 chipper for wood chips for pellets and briquettes – German production – year of production 2002 TECHNICAL PARAMETERS: filling dimension 600 x 800 mm rotor diameter 200 mm rotor width 700 mm total power 18.5 kW number of knives 26 20 mm sieve autoreverse hydraulic drawer height 170 mm spigot diameter 200 mm dimensions (length/width/height) 200 / 130 / 170 cm weight 1200 kg

Now fully refurbished by the team at STV Machinery is this BOY 22M VH injection moulding machine. This machine was manufactured in 2002 with very low 12,187 run hours. It is fitted with a 24mm screw. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding Latest Refurb ID: 12066 Manufacturer: BOY Model: 22MVH Datasheet (PDF): View Here Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 22 Screw Diameter (mm): 24 Max Shot Weight (PS)  ...

Now fully refurbished is this Arburg 420C 1000-350 injection moulding machine. This machine was manufactured in 2005 and is fitted with the ever-popular Selogica controller. It’s fitted with a 40mm diameter screw which gives a maximum shot weight (PS) 153g and single air blast. This machine comes with it’s own anti-vibration mounts and the original operators manual. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on re ...

Awaiting refurbishment at our works in Wellingborough is this BOY 30M machine with Procan controller. These 30 tonne clamp machines from BOY are some of the smallest (footprint wise) available on the market. The 30M’s are a rarer variant of the market leading BOY 22. The key difference, aside from the uprated clamp force, is that the 30M’s have larger platens and a four tiebar design, allowing for greater versatility. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get th ...

Awaiting refurbishment at our works in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12882 Manufacturer: BOY Model: 12A Datasheet (PDF): View Here Viewing: Not yet refurbished Conditi ...

We have in our workshop and awaiting refurbishment this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12646 Manufacturer: B ...

Description Single Layer Blown Film Line Material: LDPE and COMPOSTABLE Film working width: 600 / 1.600 mm. Die diametter: 100-200-300 mm. – air gap=1,4 - Blow Up Ratio (BUR) =1,5-4,5 Film thickness: 30 / 200 μ Thickness tollerance: sigma 2 ± 8% Production: 100 / 160 kg/h (with ambient temperature at 25° C) the flow rate can vary according to the thickness of the film, the width of the tube and the type of raw materials used Maximum production speed: 80 m/min Finished reels maximum diameter: 1000 mm Cardboard mandrels diameter: 3" (internal diameter) Twin winder type BA-2/1800 Line total height: 9 m

Used Labeler Cavagnino Gatti CG 84 FR 3 8 3000 bph Year 2001 For flasks of 150 mm in diameter These Cavagnino Gatti rotary wet glue labelers are capable of production speeds from 4 000 to 9 000 bottles per hour with applications throughout the wine beverage food chemical and household industries The CG84CR DR FR series of machines are the result of an innovative design that has allowed for a reduction of components of the labeling unit which has resulted in important advantages in terms of economy ease of use changeover time and maintenance This series of C G machines are available with either the standard bottle platform motion by double profile cam in an oil bath or by programmable servo platforms MP These labelers can be equipped with various optical and or mechanical spotting systems for the automatic alignment of printed capsules glass cartouches side and bottom notchlugs silk scree ...

Used Palletizer AVE PAM 60 TECHNICAL DATA CONTAINER TYPE Bundle containing PET bottles PRODUCT Water PRODUCTION 14 pallets h PALLETS DIMENSIONS 800 1200 FORMAT NUMBER AND COMPOSITION 1 0 5L bottles Format 4 3 Pack size 290x205xh 205mm Bundles per layer on 800 1200 18 pallet No of layers 7 2 0 5L bottles Format 3 2 Bundles per layer on a 800 1200 36 pallet Number of layers 7 3 1L bottles Format 3 2 Pack size 265x177xh 290mm Bundles per layer on a 800 1200 21 pallet No of layers 4 5 4 1 5L bottles Format 3 2 Pack size 265x177xh 340mm Bundles per layer on a 800 1200 21 pallet No of layers 4 5 5 2L bottles Format 3 2 Pack size 285x190xh 355mm Bundles per layer on 800 1200 18 pallet N layers 4 The PAM60 palletizer is suitable for the automatic palletization of products such as shrink wrapped cartons or bundles The fully automatic work process is managed by a P L C SIEMENS S6 DESCRIPTION OF WO ...

Description: Cogeneration plant for the electricity production from renewable sources The machine was created to be fueled with vegetable oils of rapeseed, sunflower and soybean oil, but thanks to the complex heated introduction system, it can burn animal fats and palm oil. The hourly production of electricity is equal to 940 kw/h The machinery is composed of: power source ,with fuel heating before combustion (underground tanks excluded) WÄRTSILÄ NSD 6R22/26 engine, produced in 1999 with a power of 1,065 kw at 1,000 rpm (power reduced to 940 kw/h to comply with authorisations) alternator DENOX system control panel catalytic silencer with cover and chimney chiller for cooling and heating systems hot water generation system with heat exchanger for powering warehouse heating systems transformer room ,with control panels, Landis+Gyr E650 meter, MESSINA SVT/R+AC/R medium  ...

Description: Please download the PDF with all the information about the company and the industrial equipment for sale , Plant OF A RECYCLED POLYMERS – CRUM RUBBER GRANULES The installed technology employs the cryogenic process. This technology is rare in Europe on an industrial scale Provides superior cryogenic rubber granules for both raw material and end product applications. Cryogenic granules have as their main applications: Infill for football pitches and golf courses in synthetic turf, Ecological road pavements of high resistance and durability (crumb rubber modified bitumen), Shock-absorbing and anti-compacting floors for horse riding rings and arenas, Raw material for the polymer manufacturing industry (rubber and plastic). This factory is currently the most notorious European producer offering cryogenic rubber granules. Exported is production to countries r ...

Type: WHN 13A Parameters: 130 mm, 2000 mm Manufacturer: Tos Čelákovice Year of production / SO / GO: 1979 / - / - Description: Heidenhain control system Cross arrangement of beds Four axes + rotary table Retractable working spindle Machine designed for universal engineering production Heidenhain control system Axis strengthening hydraulically Machine parameters: X-axis 3510 Y axis 2040 Z axis 1200 W 800 axis incl. reinforcement, 600 without reinforcement Clamping surface of the table 1800 x 1800. The machine is connected, with the possibility to test. Bearings and damaged wheels must be replaced in the headstock.

Thermoforming line for the production of OMV F-85 polystyrene plates, made in Italy, 2004, in operation no more than 2 years. The condition is almost new. The scheme of work is a closed technological cycle. Line composition: Extruder with a co-extruder D100 + D60 with a unit for mixing and dosing the material, calender unit, thermoforming machine F-85 with a system for stacking products, packaging machine, crushing unit, thermostats for calenders and thermal stamps, thermal stamp for dessert plates 167 mm 20 nests, thermal stamp plates flat 210 mm 12 nests with inserts for the production of plates 2x and 3x sectional. In working order.

Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...

Jacob White TFS Two flap sealer 2020, Stainless two flap sealer, variable speed, min box width 100mm to max box width 260mm, hot glue pots, mobile, 1Ph this extra information is standard for this model. Please always double-check the details during a visit The Jacob White TFS Sealer is a cutting-edge packaging machine introduced in 2020, designed to provide efficient and reliable sealing solutions for various packaging applications. Manufactured by Jacob White Packaging, a reputable name in the packaging industry, this model embodies advanced technology and precision engineering to meet the evolving needs of modern production environments. At its core, the TFS Sealer features a robust and durable construction, ensuring stability and longevity even in high-speed production settings. Equipped with state-of-the-art sealing mechanisms and intuitive control systems, it offers precise ...