production line used for sale

Overview This is a complete KEG line consisting of a refurbished filler, a new transport system, and a new outside washer. With a capacity of 50 - 65 KEG/ h, 30l DIN and Euro KEGs can be processed. The plant can be delivered in approx. 8 - 9 months after receipt of order.  Technical details  Capacity: 50 - 65 KEG/h  Efficiency: 95%.  Container types: 30 l DIN and Euro-KEG  Fitting type: flat fitting type A  Supply voltage: 230/400 V, 50 Hz Control system: SIEMENS S7  Rotating and rotating device  Internal pre-cleaning station additionally purchasable  Automatic dosing device additionally purchasable  Scope of delivery Refurbished KEG interior cleaning and filling machine | M+F KEG-Technik | MINOMAT A5/5 New KEG exterior washer | M+F KEG-Technik | AW 1150-H  KEG transport system

Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and ...

THK HSR35

pneumatic cylinder linear unit COMP AIR

Ball bushing linear guide, open linear bearing unit INA KGB0 2558 PP ( KGB02558PP ) Diameter: Ø 25 mm Base: 81 x 29 mm hole spacing: 68 mm Material ( housing ): Aluminum New ! Dimensions: 81 x 58 x 54 mm

linear unit for pneumatic cylinder JOUCOMATIC

Linear displacement transducer, LVDT sensor, analog SENSOREX SX 12 N 200 ( SX12N200 ) 10 01 02 Sensor housing: Ø 12 x 315 mm Sensor: Ø 2.5 x 300 mm New, with documents ! Dimensions ( packaging ): 500 x 50 x 50 mm

Linear guide carriage STAR 1651-514-10 Rail width: 34 / 45 mm New ! Dimensions: 160 x 140 x 55 mm

STAR 1653-524-10 New !

STAR 1671-394-10

INA I09 LKS 08VBG3 V1 ( I09LKS08VBG3V1 )

INA LFKL 52 E SF (205-155) ( LFKL52ESF(205-155) )

STAR 1631-393-10

Linear guide carriage Star 1651-294-10

IKO LW 15 x 240 ( LW15x240 )

Linear guide carriage, ball carriage THK SHS-35C SHS365C1QZZZ New ! Dimensions (packaging): 200 x 100 x 45 mm

Linear guide rails, roller rail CS REXROTH R180635331 512175403 2 pcs Length: 836 mm New ! Dimensions: 850 x 80 x 40 mm

Linear guide rail STAR 3400 x 20 (23) x 24 mm used, tested ! Dimensions: 3400 x 23 x 24 mm

Linear guide rails, roller rail CS REXROTH R180635331 512175402 2 pcs Length: 916 mm New ! Dimensions: 930 x 80 x 40 mm

Double linear guide carriage STAR 2x Linear guide carriage: 1651-21x-10 Clamping plate: 305 x 109 x 19 mm groove width: 8 / 15 mm Groove depth: 12 mm bores: 8x Ø 15 mm, 8x 9 mm bore under linear guide carriage: Ø 22 mm suitable linear guide rail see AT113 and AT114 ! used, tested ! Dimensions: 310 x 110 x 90 mm

pneumatic linear actuator FESTO DGPL-18-450-PPV-A-HD18-GK 175133 Working stroke: 450 mm carriage: 160 x 115 mm p max: 8 bar used, tested ! Dimensions: 740 x 130 x 80 mm

Linear guide carriage, ball carriage CS REXROTH R165149420 New ! Dimensions: 185 x 135 x 80 mm

Linear guide carriage with linear guide rail NSK JAPAN LS15 Table: 35 x 40 mm Linear guide rail: length: 230 mm used, tested ! Dimensions: 230 x 35 x 25 mm

Linear guide carriage, roller carriage CS REXROTH R185362210 New ! Dimensions: 310 x 230 x 110 mm

Linear guide carriage, 2 pieces, with linear guide rail, linear unit INA 87 E03 RWU 35 E KTL ( 87E03RWU35EKTL ) Table: 110 x 100 mm Linear guide rail: Cross section: 34 / 31 x 30 mm Length: 880 mm Article consists of two linear guide carriages and one linear guide rail ! used, tested ! Dimensions: 900 x 100 x 50 mm

Linear guide carriage, 2 pieces, with linear guide rail, linear unit STAR 1604-594-10 Table: 160 x 140 mm Linear guide rail: cross-section: 53 / 46 x 48 mm Length: 2520 mm Article consists of two linear guide carriages and a linear guide rail ! used, tested ! Dimensions: 2550 x 140 x 75 mm

Linear guide rails with carriage PAGUS 700 x 43 x 37 mm ( 700x43x37mm ) carriage 190 x 25 mm used, tested ! Dimensions: 700 x 43 x 37 mm

Linear guide carriage, 3 pieces, with linear guide rail NSK LGY45 ( 3 pieces ) Table: 120 x 102 mm Linear guide rail: length: 1935 mm, width: 45 mm, height: 37.5 mm spare part for machining center MAZAK AJV25/405 ! used, tested ! Dimensions: 2000 x 120 x 60 mm

Linear guide carriage, 2 pieces, with linear guide rail SCHNEEBERGER MRC 45 1625-W2-G1-V3 1x Linear guide carriage: MRC 45 G1 - V3 Table: 86 x 100 mm hole spacing: 60 mm 4x threaded hole: M12 x 1,75, Depth: 25 mm 1x Linear guide carriage: MRD 45 G1 - V3 Table: 86 x 135 mm hole spacing: 60 / 80 mm 4x threaded hole: M12 x 1.75, depth: 25 mm Linear guide rail: MR 45-G1 length: 1625 mm, width: 45 mm, height: 40 mm through holes: Ø 20 / 13.5 mm, Depth: 19 / 21 mm hole spacing: 52.5 mm New ! Dimensions: 1625 x 86 x 70 mm

Linear guide carriage, 2 pieces, with linear guide rail STAR 1824-33X-10 ( 2 pieces ) 935614 Table: 104 x 70 mm Linear guide rail: length: 1040 mm, width: 34 mm, height: 31 mm spare part for machining center HECKERT CWK400 ! used, tested ! Dimensions: 1050 x 70 x 60 mm

Crossed roller linear guide THK 3075T Table: 80 x 40 mm travel: ± 22.5 mm Material: Steel New ! Dimensions: 80 x 40 x 16 mm

Linear guide rails with 2 carriages, 2 pieces THK SR20W2SSC1E+410L-II Table: 47 x 42 mm Linear guide rail: length: 410 mm, width: 20 mm, height: 15.5 mm New ! with documents ! Dimensions ( linear guide rails with 2 trolleys ): 410 x 42 x 28 mm Dimensions ( packaging ): 410 x 42 x 28 mm

Crossed roller linear guide SCHNEEBERGER 2x R 125 / R3125 Table: 130 x 60 mm travel: ± 37.5 mm Material: Steel New ! Dimensions: 130 x 60 x 28 mm

Timing belt axis linear module INA MDKUVE 15-500 3 ZR AL 05-858-526 Working stroke: 1 490 mm carriage: 500 x 176 mm flange (drive): 115 x 115 mm shaft: Ø 28 mm used, tested ! Dimensions: 2210 x 28 x 130 mm

Linearantrieb G.A.S., Gesellschaft für Antriebs- und Steuerungstechnik mbH KA 50 HUB 200 ( KA50HUB200 ) 302502 stroke: 200 mm used, tested ! Dimensions: 315 x 160 x 95 mm

Linear guide carriage, 2 pieces, with linear guide rail, linear unit ROLLON NCC28 Table: 88 x 27 mm Linear guide rail: cross-section: 28 x 12 mm length: 2600 mm article consists of two linear guide carriages and one linear guide rail ! used, tested ! Dimensions: 2600 x 30 x 25 mm

Linear guide rails with 4 carriages PAGUS 2000 x 43 x 37 mm ( 2000x43x37mm ) 4 carriages 120 x 25 mm New ! Dimensions: 2000 x 43 x 37 mm

Linear guide carriage SCHNEEBERGER MRD 25 G3 - V2 ( MRD25G3-V2 ) Table: 48 x 80 mm hole spacing: 50 / 35 mm 4x threaded hole: M6 x 1.0, depth: 15 mm New, with documents ! Dimensions ( Linear guide carriage ) : 104 x 48 x 34 mm Dimensions ( Packaging ): 135 x 55 x 50 mm

Linear guide rails with 4 carriages PAGUS 2000 x 43 x 37 mm ( 2000x43x37mm ) 4 carriages 120 x 25 mm Dimensions: 2000 x 43 x 37 mm

Linear motor with rotor LINMOT PS01-23x80-R Product no.: 0150-1233 stroke: max. 780 mm force: max. 44 N Nominal force : 8.6 / 16 N Max. Speed: max. 5.9 m/s stator diameter: Ø 23 mm stator length: 162 mm rotor diameter: Ø 12 mm Runner length: 130 mm (max. 850 mm possible) stator with IP67 connector M17/9(m) used, tested ! Dimensions ( packaging ): 195 x 35 x 75 mm

Linear guide carriage, 2 pieces, with linear guide rail SCHNEEBERGER MRC 45 1415-W2-G1-V3 2x Linear guide carriage: MRC 45 G1 - V3 Table: 86 x 100 mm hole spacing: 60 mm 4x threaded hole: M12 x 1,75, Depth: 25 mm Linear guide rail: MR 45-G1 Length: 1415 mm, Width: 45 mm, Height: 40 mm Through-holes: Ø 20 / 13.5 mm, Depth: 19 / 21 mm Hole spacing: 52.5 mm New ! Dimensions: 1415 x 86 x 70 mm

Linear guide carriage, with linear guide rail SCHNEEBERGER MRC 45 1625-W1-G1-V3 Linear guide carriage: MRD 45 G1 - V3 Table: 86 x 135 mm hole spacing: 60 / 80 mm 4x threaded bore: M12 x 1,75, Depth: 25 mm Linear guide rail: MR 45-G1 Length: 1625 mm, Width: 45 mm, Height: 40 mm Through- Bores: Ø 20 / 13.5 mm, Depth: 19 / 21 mm Hole spacing: 52.5 mm New ! Dimensions: 1625 x 86 x 70 mm

Piston rod brake, electromagnetic MAYR 2x ROBA - linearstop 80/382.021.0 S Article number: 8277025 Holding force ( per ROBA - linearstop ): 17.5 kN Power consumption ( per ROBA - linearstop ): 3x 0.042 kW Nominal coil voltage: 52 V DC Rod diameter: Ø 25 mm Rod thread: M20 x 1.0 Thread length: 95 mm total length of the rod: 1795 mm possible rod stroke: 1070 mm used, tested ! Dimensions: 1795 x 255 x 170 mm

Piston rod brake, electromagnetic MAYR ROBA - linearstop 60/382.021.0 Article number: 8231140 Holding force: 6.5 kN Power consumption: 3x 0.02 kW Nominal coil voltage: 52 V DC Rod diameter: Ø 20 mm Rod thread: M16 x 1.5 Thread length: 45 mm total length of the rod: 620 mm possible rod stroke: 350 mm used, tested ! Dimensions: 680 x 110 x 127 mm

Linear sliding unit IKO Nippon Thompson BSP1045SL 749-317 1951227 Table: 45 x 10 mm travel: ± 20 mm Load capacity: 389 N Material: Stainless steel New Dimensions ( linear sliding unit ): 45 x 10 x 6 mm Dimensions ( packaging ): 65 x 30 x 20 mm

Linear guide rails, roller rail REXROTH 1580 x 65 x 60 mm ( 1580x65x60mm ) R180760231 New ! Dimensions: 1580 x 65 x 60 mm

Linear sliding unit IKO Nippon Thompson BSR1560SL 749-351 1960315 Table: 60 x 15 mm travel: ± 15 mm Load capacity: 626 N Material: Stainless steel New ! Dimensions ( linear sliding unit ): 60 x 15 x 8 mm Dimensions ( packaging ): 85 x 40 x 20 mm

pneumatic linear actuator FESTO DGC-12-370-KF-YSRW-A 530907S708 Characteristic length: 370 mm New ! Dimensions: 520 x 40 x 30 mm

Linear guide carriage with linear guide rail INA Linear guide carriage: O4 D4 KWE 35 G3 V2 ( O4D4KWE35G3V2 ) table: 75.5 x 100 mm 4x threaded bore: M10 x 1.5, continuous hole spacing: 82 / 62 mm 4x bore: Ø 7.5, continuous hole spacing: 80 mm Linear guide rail: B7 TKD 3FG3/0300 ( B7TKD3FG3/0300 ) Length: 300 mm, width: 34 mm, height: 23 mm through holes: Ø 9.5 / 15.0 mm, depth: 11 / 12 mm hole spacing: 80 mm used, tested ! Dimensions: 300 x 100 x 48 mm

Linear guide carriage with linear guide rail, 2 pieces PAGUS LS15 travel: 68 mm Table: 77 x 47 mm Linear guide rail: 15.5 x 19 mm, Length: 146 mm Material: Aluminium, Running surfaces: Steel used, tested ! Dimensions ( single ): 153 x 47 x 24 mm Dimensions ( packaging ): 160 x 50 x 50 mm