processing used for sale

The machine is in good technical condition; testing is possible by prior arrangement. It is designed for machining parts made of wood, plastic, and composite materials. It features the Siemens SINUMERIK 840D/810D control system.

Vacuum Pump

BAZ Hermle U630T BJ 1998

Manufacturer: YCM Model: XV 560 A Year: 2011 Condition: Used Stock number: 9493 Control system: FANUC MXP-100FA Switch-on hours: 11362 h Operating hours: 3460 h Work table length: 700 mm Work table width: 420 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 10000 1/min X-axis travel: 560 mm Y-axis travel: 410 mm Travel Z axis: 450 mm

Manufacturer: FERMAT Model: VMF 1000 CNC Year: 2008 Condition: Used Stock number: 9494 Control System: FANUC Series Oi-MC Switch-on hours: 25998 h Work table length: 1300 mm Work table width: 600 mm Spindle drive power: 15 kW Speed: 10000 1/min X-axis travel: 1006 mm Y-axis travel: 598 mm Z-axis travel: 600 mm Machine weight: 5000 kg

Technical data: Manufacturer: FomIndustrie Type: MIRAGE 600 Year of Make: 2019 Control: POWER R (electric) Possibility of using a saw blade Saw blade ⌀: 355 mm (iron) TCT saw blade ⌀: 400, 500 or 600 mm (aluminium/light alloy) Performance Minimum speed: 1,250 rpm Maximum speed: 1,800 rpm Fixed cut: 90° Three-phase motor M112: 7.5 kW Average operating pressure: 550 NL/cycle Operating pressure: 7 bar Working Range/Load Width of work surface left: 200 mm Width of work surface right: 150 mm Smallest bar passage: 105 mm max. load: approx. 500 kg Dimensions and weight Dimensions L/W/H: 3,000 mm, 1,950 mm, 2,050 mm Weight: 850 kg Condition Condition: Used Functional: tested and fully functional Other equipment and accessories included: Roller conveyor Pre-installation for chip and smoke removal Front hood with manual opening Integral protective h ...

Manufacturer: HYUNDAI KIA Model: VX 500 Year: 2007 Condition: Used Stock number: 9495 Control System: FANUC Series 21i-MB Work table length: 1200 mm Work table width: 500 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 1090 mm Y-axis travel: 510 mm Z-axis travel: 635 mm Machine weight: 7000 kg

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

Manufacturer: MORI SEIKI Model No.: SH 633 Year: 1999 Condition: Used Stock number: 9496 Control system: MORI SEIKI MSG-502 Work table length: 700 mm Work table width: 500 mm Maximum table load (uniform): 1200 kg Maximum spindle speed: 10000 1/min X-axis travel: 840 mm Y-axis travel: 760 mm Travel distances Z-axis: 840 mm Machine weight: 18500 kg

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

Manufacturer: Pinnacle Model: VMC 2000S Year: 2015 Condition: Used Stock number: 9499 Control system: HEIDENHAIN Work table length: 2200 mm Work table width: 850 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 2000 mm Y-axis travel: 900 mm Travel Z axis: 850 mm Machine weight: 16000 kg

The machine is in good technical condition; it can be tested by prior arrangement.

Key data: 1760 mm, 600 mm, 800 mm

Control: Name: Heidenhain iTNC 530 Technical data: • Spindle: 10000 rpm • Swivel head: -90° to +90° • 22-fold tool changer • Table size: 2380 mm x 600 mm • Internal coolant supply (IKZ) • Chip conveyor • Coolant system Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

3 digital axes Axis: X Longitudinal: 510 mm - Transverse Y: 510 mm - Vertical Z: 510 mm Worktop surface dimension: 650 x 510 mm Load capacity: 350 kg Spindle Speed Range: Acramatic 850 SX - 60 -8000 tmm Storage capacity: 21 tools Automatic tool change time 7.5s Maximum weight of tool and tool holder: 6.8 kg Fast travel speed Xet Y axes: 20000 mm/min Z-axis fast travel speed: 18000 mm/min

The machine is in good technical condition; testing is possible by prior arrangement. TNC530, HSK63, 12,000 rpm, 28-position tool magazine, 40-bar through-spindle coolant (IKZ), laser tool breakage detection.

x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm Control: SIN840D sl B - axis: 360 x 0,001 ° A - axis: -180 / +45 x 0,001 ° feed x-axis: 1 - 65.000 mm/min feed y- axis: 1 - 50.000 mm/min Feed z- axis: 1 - 80.000 mm / min. rapid traverse X/Y/Z: 60 / 50 / 80 m/min spindle turning speed - stepless: 1 - 16.000 U/min power capacity at 100 % load: 25,00 kW power capacity at 40 % load: 35,00 KW max. torque at 40% / 100% load: 223 / 160 Nm spindle diameter in front bearing: 80 mm tool taper: HSK-A63 tool magazin:: 50 tool length - max.: 400 / 465 mm tool diameter: 72 mm tool diameter with 2 vacant positions: 160 mm tool total weight: 8,00 kg size of pallet: 630x630 mm workpiece weight: 700 kg interference diameter: 900 mm total power requirement: 50,00 kW weight of the machine ca.: 26,00 t dimensions of the machine ca.: 7,00 x 4,50 x H3,50 m 5-axis machining center with SIEMENS Sinumerik 84 ...

The machine is in good technical condition; testing is possible by prior arrangement. X-axis travel: 850 mm; Y-axis travel: 700 mm; Z-axis travel: 500 mm. Table dimensions (LxW): 10; load capacity: 2000 kg. Rapid traverse (XYZ/BC): 35 m/min. Spindle head: HSK-A63; speed: 0–18,000 rpm; spindle motor power: 20 kW. Tool positions: 38. Control system: Heidenhain TNC 640. Air through spindle. Heidenhain TS460 touch probe. Electronic handwheel. Approx. 20 HSK-A63 tool holders (in the changer). Manual cabin roof. Preparation for mist extraction system. Wash-down gun. Original HERMLE + Heidenhain documentation.

Key data: 3000 mm, 800 mm, 1000 mm

Universal machining center Travel x/ y/ z = 3000 / 800 / 1000 mm Spindle speed up to 15000 1/min Spindle drive power 30 KW - 190 Nm Tool magazine 48 Tool positions HSK 63 max. tool diameter 70/ 130 mm max. tool length 340/ 450 mm Max. table load 1500 kg Machine weight approx. 17500 kg - Pendulum operation - Coolant system - Chip conveyors - CNC control Heidenhain iTNC 530 - Integrated rotary table - Swivelling milling head horizontal/vertical

Key data: 1800 mm, 2100 mm, 1250 mm

We hereby offer you a 5-axis machining centre from DMG as follows: Basic machine data Make: DMG Type: DMU 210 P Year of construction: First commissioning June 2017 Condition: very good – machine set to half tolerance Control: Name: Heidenhain iTNC 530 HSCI Handwheel: Heidenhain HR 520 FS Technical data: • Spindle: 20-12000 rpm // 457 Nm – spindle with increased torque • CNC rotary table Ø 1700 mm • Table load: 8000 kg • B-axis (infinitely variable) • 120x WZW • HSK-A 100 interface • IKZ (internal coolant supply) 80 bar – frequency-controlled • 980 l coolant tank with paper belt filter • Zero-point clamping system incl. extensive accessories – pots, spigots, matching clamping plates, etc. • Chip conveyor • Rinsing gun • Infrarottprobe • Blumlaser • MPC – Machine Protection Control The machine is in very good con ...

Key data: 1120 mm, 510 mm, 510 mm

CNC vertical machine center. Control unit - MAZATROL M32B Dimensions: 4000x3000x3000mm Table: 1460x510mm Max material weight: 800kg Automatic magazine: 24 tools Tool holder: CAT 40

AVEREX HS-450i ist ein 4-Achsen Bearbeitungszenter, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Längsweg (X) 640 mm, Querweg (Y) 610 mm, Vertikalweg (Z) 680 mm; Werkstückhöhe 1000 mm, Durchmesser 785 mm, Max. Werkstückgewicht 550 kg; Teilung des Tisches (C) 0,001°. Eilgang 60 m/min in Längs-, Quer- und Vertikalrichtung; Maschinengewicht ca. 11.645 kg; Abmessungen 4.730 x 2.260 x 2.600 mm (L x B x H). Ermöglicht enge Toleranzen und eignet sich für Automotive, Uhrengewerbe, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

Key data: 600 mm, 550 mm, 360 mm

Horizontal, two-spindle machining center in 4th axis design with swivel beam. Swivel beam 0/ 180 ° Tool holder HSK 100 Spindle speed range 2 x to 5,000 1/min Power 2 x 31 KW/ 2 x 780 Nm Tool magazine 2 x 40 tool positions max. tool diameter 100/ 340 mm max. tool length 300 mm max. tool weight 25 kg Spindle spacing 600 mm CNC Control 840D Chip conveyor Coolant system central

Key data: 762 mm, 406 mm, 508 mm

Manufacturer: HAAS Model No.: VF-2DHE Year: 2005 Condition: Used Stock number: 9515 Maximum vertical spindle speed: 7500 1/min X-axis travel: 762 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Number of stacking positions: 20 pieces Machine weight: 3500 kg

x-travel: 935 mm y-travel: 850 mm z-travel: 650 mm control: Heidenhain TNC 640 Main spindle:: turning speed range - main spindle: 20000 min/-1 power capacity - main spindel: 35 kW tool taper: SK 40 work table:: table surface area: 1000 x 750 (dia 850) mm max. table load: 1500 kg tool magazin:: number of toolpositions: 60 pos. tool taper: SK40 feeds:: feed speeds: 40.000 mm/min rapid traverse: 40 m/min Accelaration: 5 m/s² c-axis: 360 ° A-Axis: +/- 120 ° total power requirement: 46 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,1 x 4,4 x 3,2 m 5-axis universal machining centre equipped with: - Heidenhain TNC 640 CNC control - 60-position ATC (SK 40) - Heidenhain TS 460 touch probe - Chip conveyor with coolant - Paper belt filter - IKZ 40 bar - Blum laser tool measurement system - NC swivelling rotary table, diameter 850 x 750 mm 16,800 spindle hours and 48,00 ...

Management Heidenhain MillPlus IT Travel X/Y/Z: 1250 x 710 x 710 mm Spindle speed: 12,000 min-1 Tool magazine for 60 Wkz., SK 40 NC rotary table integrated in rigid table d 800 mm / 1500 mm x 800 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swivel range -120/+30° Probe Infrared Fabr. Heidenhain TS 649 3D quickSET Expansion Pack Production package 40 bar/23 l/min (theor. Pump capacity)Tank 600 l, paper belt filter, rotating viewing panel Chip conveyor

Key data: 1600 mm, 1200 mm, 800 mm

Manufacturer: Trimill Model No.: HF 1612 Year: 2004 Condition: Used Stock number: 9519 Control system: SIEMENS Sinumerik 840 Work table length: 1600 mm Work table width: 1600 mm Maximum table load (uniform): 20000 kg X-axis travel: 1600 mm Y-axis travel: 1200 mm Z-axis travel: 800 mm Machine height: 3749 mm Machine length: 8335 mm Machine width: 7070 mm Machine weight: 48300 kg

x-travel: 1100 mm y-travel: 610 mm z-travel: 610 mm control: Heidenhain 530 total power requirement: kW weight of the machine ca.: 7800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 550 mm, 550 mm, 510 mm

CNC Vertical Machining Center "DECKEL MAHO M 1" With rail control Siemens 828 D Shop Mill Year of construction: 2022 Commissioning: 9/2023 Travel: X 550 Y 550 Z 510 Speed range: 20 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) IKZ 20 bar Electronic handwheel 3 D Probe Renishaw PP 40 Tool Length Measurement Renishaw TS27R Full protection cabin with sliding doors and interior lighting Coolant Setup Chip conveyor Oil mist extraction Coolant spray gun 3 Height Adjustable Machine Shoes Operating Instructions THE MACHINE IS IN TOP CONDITION!

Manufacturer: Elumatec Model: SBZ 130 Year: 2007 Condition: Used Stock number: 9523 Max. machining length: 6500 mm Spindle drive power: 5.5 kW Maximum spindle speed: 6000 1/min Number of axes: 3 Maximum feed in the X-axis: 34 m/min Maximum feed rate in the Y-axis: 18 m/min Maximum feed rate in the Z-axis: 18 m/min Tool magazine capacity: 8 Machine weight: 5500 kg

Single-screw extruder manufactured in 2005. This TECNOVA ES130/37D DEG features a screw diameter of Ø 130 mm and an L/D ratio of 37:1. It includes a powerful main motor rated at 246 HP and a degassing system for enhanced processing. The barrel temperature control offers individually controlled heating and cooling zones, ensuring optimal performance. If you are looking to get high-quality plastic processing capabilities, consider the TECNOVA ES130/37D DEG machine we have for sale. Contact us for further details.

X-axis 1000 mm Y-axis 900 mm Z-axis 1000 mm Max. workpiece Ø Iecoz Df Sus Ehgzvnebb 1000 mm Max. workpiece height 1000 mm Max. spindle speed: 6000 rpm Tool magazine with 60 tool positions BT50 Big Plus Machine with only 500 spindle hours. New condition.

# HP Jet Fusion 5200 – Produktionsbereites MJF-System mit vollständiger Peripherie Zum Verkauf steht eine HP Jet Fusion 5200 aus dem Jahr 2019, eine industrielle 3D-Druckanlage auf Basis der MJF -Technologie für die wirtschaftliche Serienfertigung von Kunststoffbauteilen. Die Anlage wurde im August 2020 in Betrieb genommen und verfügt über ca. 5.100 Betriebsstunden. Ein aktiver Wartungsvertrag läuft bis 20.01.2026. Lieferumfang HP Jet Fusion 5200 Druckeinheit Post Processing Station für Pulverentfernung und -aufbereitung 2 Build Units (parallele Produktion, reduzierte Stillstandzeiten) 2 Pulverfässer Transportstapler für Build Units und Materialhandling Technische Spezifikation Bauraum: 380 × 284 × 380 mm Schichtdicke: ca. 80 µm Materialien: PA12, PA12 GB, PA11 (je nach Konfiguration) Pulvermanagement: Automatisiert über Post Processing Station Betriebsart: Industrieller Da ...

The machine is in good technical condition; testing is possible by prior arrangement. + Accessories: Chip auger, programmable coolant nozzle, power failure detection module, remote jog handle with color LCD, rigid tapping, 15,000 rpm spindle (ISO 40 taper), 30 hp (22.4 kW) vector drive, inline direct drive, intuitive Renishaw wireless probe system, 2x machine vise, 30x tool holder.

• Incl. left roller conveyor • Roller conveyor width: 240 mm

Attention: the machine can be transported on a truck up to 3000 mm wide! Incl. the tool holders located in the tool changer. Additional technical specifications: • Setup mode X/Y/Z: 20 - 2000 mm/min • Position measuring system X/Y/Z: 0.001 mm • with in total 32-tool changer (2 x 16 places) • Max. tool diameter with fully places magazine 1: 130 mm • Max. tool diameter with fully places magazine 2: 80 mm • max. tool weight at automatic tool changing: 8 kg • Max. total tool weight in magazine: 160 kg • NC rotary table built into the rigid table. • Number of T-slots: 14/H 12 mm • Aligning slot/one: 14/H 7 mm • T-slot spacing: 63 mm • Permissible load of work tables: Rotary table: 500 kg

Additional technical specifications: • Digital display: available • Roller conveyor: available • Roller conveyor length: approx. 3000 mm

Incl. 60-fold tool changer, NC rotary table with swivel axis, incl. three-jaw chuck, jaw width: 250 mm, incl. tool holders located in the tool changer, incl. chip conveyor and coolant unit Attention: The machine can be transported on a standard truck! Additional technical specifications: • Measuring system resolution X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • Max. tool length from spindle nose: 280 mm • Max. tool weight for automatic tool change: 6 kg • T-slot spacing: 63 mm 14 H 7 • Center bore: 30 mm • Swiveling speed: 26 rpm • Input and display unit: 0.001° Note: No guarantee can be given regarding the current runout or machining accuracy of the machine. We have received information indicating a possible deviation in the area of the tool holder or clamping system. An appropriate inspection is recommended.

incl. NC rotary table, with 9 slots, incl. the tool holders located in the tool changer as well as chip conveyor and coolant unit Attention: the machine can be transported on a standard truck. Attention: the vices visible in the photos are not included in the scope of delivery! Additional technical specifications: • nominal current: 80 A

Incl. 60-fold tool changer, NC rotary table, incl. tool holders located in the tool changer, incl. chip conveyor and coolant system. Attention: without the machine vise shown in the photos! Additional technical specifications: • nominal current: 100 A • Path measuring system resolution: 0,001 mm • Input resolution in X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • max. tool diameter with free adjacent places: 160 mm • tool length from spindle nose without tool breakage monitoring: 350 mm • with tool breakage monitoring: 315 mm • max. tool weight at automatic tool change: 10 kg • max. total tool weight in magazine: 200 kg • Distance of T-slots: 63 mm • Number of T-slots: 9/14 pcs • Center bore: 50 mm • max. rotation of the table top: 20 rpm • Feed: 3600°/min • Resolution of the measuring system: 0.001°

Attention: the hydraulic clamping systems visible in the photos are not included in the scope of delivery! Attention: the machine can be transported on a standard truck! Additional technical specifications: • Year of manufacture: presumably 2006 • Slots: 9 pieces • Swivel head: 360° • incl. protective enclosure

Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V

Incl. NC rotary table, also a simple pallet changer system, incl. the SK 40 tool holders located in the changer as well as chip conveyor and coolant unit. Attention: the machine can be transported on a standard truck! Additional technical specifications: • nominal current: 80 A • Distance between clamping holes: 100 mm • Number of clamping holes: 33 mm • Center bore: 50 mm • Max. rotation of the table top: 13.6 rpm • Feed: 3600°/min

• Incl. roller conveyor on the left • Roller conveyor width: 400 mm

Management Heidenhain MillPlus IT Travel distances X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 60 Wkz., SK 40 NC rotary table integrated in rigid table d 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swivel range -120/+30° 3D quick SET Production package 40 bar/23 l/min (theor. Pump capacity)Tank 600 l Paper Belt Filter rotating viewing panel Chip conveyor

MIKRON UCP 600 ist ein Vertikal Bearbeitungszenter, ausgelegt für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. 5 Achsen für 5-Seiten-Bearbeitung; Rundtisch Ø400 mm; Verfahrwege X 600 mm, Y 450 mm, Z 450 mm; Tischbelastung 400 kg; B-Achse -115/+30°; C-Achse 360°. Werkzeugwechsler TC 30; Spindel stufenlos 50–20.000 t/min; Spindelmotor 5,5 kW; Gesamtbedarf 18 kW; Vorschub 22 mm/min; Eilgang 22 m/min; Anschluss 3x400 V 50 Hz; Gewicht ~6500 kg; Abmessungen 2500×1600×2650 mm; Schallpegel 75 dB(A). Ausstattung: Kühlmitteleinrichtung, elektronisches Handbedienpult, elektronisches Handrad. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrmacherei, Maschinenbau. Technische Daten ohne Gewähr

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - NT 5400/1800 SZ DCG WAREHOUSE NO - ONY100000580 YEAR OF MANUFACTURE - 2007 CONTROL UNIT - MSX-701 III AXIS TRAVELS - X1 1,040 MM / X2 267 MM / H ± 255 MM / Z1 1,940 MM / Z2 1,830 MM ROTARY AXIS MOVEMENTS - B ±120° / C 360° MAX. TURNING DIAMETER - 920 MM MAX TURNING DIAMETER - 470 MM MAX TURNING LENGTH - 1.921 MM SPINDLE - 1 SPINDLE SPEED - 2,400 MIN/-1 MIRROR SIZE - 450 MM ROD DIAMETER - 107 MM MAIN SPINDLE SPEED (S1) - 8,000 MIN/-1 HOLDER TYPE - CAPTO C8 SPINDLE - 2 COUNTER MIRROR REVOLUTION - 2,400 MIN/-1 MIRROR SIZE - 450 MM TURRET-2 NUMBER OF HOLDERS - 10 MACHINE WEIGHT - 36.000 KG MACHINE EXTERNAL DIMENSIONS - 4.50 X 6.61 X 3.46 M

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - DMU 75 MONOBLOCK WAREHOUSE NO - ONY100000591 YEAR OF MANUFACTURE - 2014 CONTROL UNIT - HEIDENHAIN iTNC 530 HSCI AXIS TRAVELS - X 750 mm / H 650 mm / Z 560 MM ROTARY AXIS MOVEMENTS - A +120° / -120° / C 360° SPINDEL CYCLE 18.000 RPM HOLDER TYPE - SK 40 NUMBER OF TEAMS - 60 TABLE SIZE - 800 × 650 mm (d 650 MM ) WORKPIECE WEIGHT (MAX) - 600 kg MACHINE WEIGHT - 11.600 kg MACHINE EXTERIOR DIMENSIONS - 310 × 245 × 285 cm

CATEGORY - 5-Axis BRAND - DMG MORI MODEL - DMU 60 EVO LINEAR WAREHOUSE NO - Z100000517 YEAR OF MANUFACTURE - 2012 CONTROL UNIT - SIEMENS AXIS TRAVELS - X 600 MM / H 500 MM / Z 500 MM ROTARY AXIS TRAVELS - B -5° / +110° / C 360° SPINDEL SPEED - 18.000 MIN/-1 HOLDER TYPE - HSK-A 63 TABLE SIZE - D 600 X 500 MM WORKPIECE WEIGHT (MAX) - 400 KG NUMBER OF PALLETS - 2 PALLETS MACHINE WEIGHT - 12.000 KG MACHINE EXTERNAL DIMENSIONS - 2.80 X 3.25 X 2.78 M

Key data: 800 mm, 500 mm, 540 mm

CNC Vertical Machining Center MIKRON VCE 800 W Pro With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 500 Z 540 Speed range: 30 – 10,000 rpm continuously variable ( SK 40 ) With the following accessories: Rigid angle table 910 mm x 500 mm clamping surface Vertical tool changer with 24 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Direct displacement measuring system (Heidenhain glass scales) Electronic handwheel Spindle cooling unit Chip rinsing gun Signal lamp Spiral Screw Conveyor Coolant Setup Operating Instructions