processing line used for sale

Used Tetra Pak A3 speed 030V 200 slim Filling lineTechnical Specifications & Performance DataThis complete used bottling line is a Tetra Pak A3 Speed (030V) configuration dedicated to 200 ml Slim cartons. It is a second hand, overhauled industrial packaging solution engineered for consistent performance in beverage production. All core components are manufactured by Tetra Pak for seamless compatibility and robust uptime.Main filler: Tetra Pak A3 Speed (030V), year 2011Container format: 200 ml Slim cartons (0.2L)Production capacity: 24,000 packs/hourRecorded hours: Filler 25,731 h; Accumulator 1,609 h; Straw applicator 14,219 h; Case packer 21,065 hLine status: Used and overhauledManufacturer: Tetra Pak (all included machines)Container type: Carton (brick-style)Included models: A3 Speed 030V filler; ACHX 30 accumulator; SA30 straw applicator; CBP30 Speed case packerAdvanced Automation & C ...

GIARDINA GROUP automatic powder coating line was built in 2018 in Italy by Giardina Finishing S.r.l. The line is characterised by a low level of wear, with a total operating time of approximately 6 months. During this period, it was used for coating panels intended for sectional doors. The GIARDINA GROUP powder coating line was designed for the comprehensive powder coating of flat metal components with maximum dimensions of 6000 x 1300 mm. The entire process is performed continuously, without the need for manual handling of the components. Transportation of parts between the individual stages is performed using a conveyor system. The system consists of: – BR-6000 loading roller conveyor – Dualtech 416 SB Dry automatic spraying machine – electronic control system with a PLC controller and touch screen – GPM/5 multi-level horizontal powder coating curing oven with hot air ...

A complete bread production line with proofing equipment is offered. The production line consists of a total of nine documented components: WP Kemper lifting and tipping device HK200L, WP Haton conical rounder CR59-AT, WP Haton dough divider V300, WP Haton conveyor 500mm, WP Haton conveyor 1000mm, WP Haton intermediate proofer AF2002, WP Haton discharge conveyor with retracting belt, WP Haton long moulder Combi UL and WP Haton delay conveyor. Inspection possible by appointment.

Used DC GF 3-in-1 filling line, sparking water 6000 BPH, Year 2013Technical Specifications & Performance DataThis used bottling line is configured for PET bottle production and beverage filling, combining a linear blow molding machine, high-pressure compressed-air equipment, an integrated rinsing, filling and capping monoblock, labeling, coding, saturation and shrink-wrapping equipment. The line is designed for industrial packaging of carbonated, oxygenated and non-carbonated beverages.Blow molding capacity: 1,000–2,000 bphFilling monoblock capacity: 4,000–6,000 bph at 0.33LSupported bottle formats: 0.33L, 0.5L and 1.5LContainer material: PET bottles with PCO neck finishComplete line footprint: approximately 11 m × 6 mBlow molder configuration: linear, 2 cavities, 20–50 g preformsFilling monoblock: 18 rinsing stations, 18 filling valves and 6 capping headsAdvanced Automation & Con ...

Agnati / Fosber 2500 mm – Complete corrugating line Year: Various component years Working width: 2,500 mm Operator side: left Components of different years; Upgrades in 2023 Equipment: 2 Agnati S-90 single facers; 4 flute cartridges C/C/B/E Roll stands, 5 GVR splicers and preheaters Double glue unit and double backer Agnati V-HRS rotary shear Fosber TWIN 400 slitter scorer Agnati V-TREL 90 D cut-off; New Engineering downstacker Fosber Syncro V3 dry-end control system Reference: PP-61683 Further information on request.

BHS / Agnati / Fuma RHDPG – Complete corrugating line Year: Installed 2004; various component years Max. usable width: 2,400 mm; max. sheet length: 3,600 mm Listed line speed: up to 300 m/min, depending on product and individual units Installed in 2004; components of different years Equipment: BHS AF-P single facers for B/C and B/E flute Roll stands, splicers, BHS web guide, preheaters and glue unit Agnati GPA 3+1 double facer Slitter scorer and cut-off BHS stacker and Dücker outfeed Automatic SRP GK-1200 starch kitchen Reference: PP-58376 Further information on request.

Kochsiek BL66 – Complete multiwall paper-sack line Year: 2003 Paper plies: up to 3; printing colours: 4 Output: up to 400 pieces/min, depending on sack format and specification Equipment: Tuber with 3 unwinders and perforating unit Four-colour printing unit, cross and longitudinal pasting Transfer system, bottomer and palletiser Automatic rotary feeder on the bottomer Bottom-patch feeding on both sides and double valve unit Complete line for multiwall paper sacks. Format range on request. Reference: PP-53973 Further information on request.

Asitrade / Bobst 1650 – Inline double-wall laminating line Year: 1995 / 2016–2018 Working width: 1,650 mm; double-wall configuration Flutes: E, B, F, C; operator side: left Asitrade components from 1995; Bobst additions from 2016–2018 Equipment: Asitrade single facer and Bobst Modul Facer MF 260 Roll stands and splicers; Spiess feeder for printed top sheets Asitrade litho laminator; Bobst Triplo J 13 second gluing station Bobst QBK cut-off and Copar system Pressure belt, flip-flop unit and non-stop high-pile delivery Reference: PP-51501 Further information on request.

Champion CT28 – Single-face corrugating line Year: 2017 Working width: 1,650 mm Single-face corrugated-board production in sheets and reels Equipment: 2 hydraulic roll stands and 2 automatic splicers 2 preheaters and 1 single facer Storage bridge and conveyors Inline slitter with winder Slitting/cross-cutting unit for sheets Included flute profiles and format range on request. Reference: PP-38155 Further information on request.

Used automatic beer filling line 1400 BPH on 330ml - Year 2016Technical Specifications & Performance DataThis used bottling line is an automatic beer bottling solution manufactured in 2016 for the processing of 0.33L bottles. The line is designed for a production capacity of 1200–1400 bph and combines rinsing, isobaric filling, crown capping, labeling, coding and bottle conveying in a compact industrial packaging configuration.Production capacity: 1200–1400 bphBottle format: 0.33LBottle Height: Min. H 180mm, Max. H 350mm. Product application: BeerYear of manufacture: 2016Filling monoblock: ISO 9-9-1CStated installed power: 5.5 kW across the labeling machine, filling monoblock and tables/conveyorsAdvanced Automation & Control SystemsThe automatic ISO 9-9-1C triblock integrates a rinsing turret, an isobaric filling turret and a capping turret in one synchronized bottling machine. The r ...

Used BORELLI T12 TECNA line - Year 2023Technical Specifications & Performance DataThe Borelli TECNA Line T12 is a glass bottle rinsing monoblock designed for sterile-water rinsing before filling in an automatic bottling process. This used bottling line component is fitted with a 12-pincer and 12-nozzle rinsing turret, providing a simple rinse treatment with discharged rinse water.Manufacturer: BorelliModel: TECNA Line T12Year of production: 2023Maximum speed: 3000 bphRinsing system: 12 pincers/nozzlesCompatible containers: Glass bottlesCompatible formats: 0.5L, 0.75L (2.000 bph) and 1.5L (1.500 bph) bottle formats 0.375 L Bordeaux – Ø 63 × H 235 mm – cork stopper0.750 L Bordeaux – Ø 76.5 × H 288 mm – cork stopper0.750 L Bordeaux – Ø 76.5 × H 290 mm – cork stopper1.000 L – Ø 86 × H 314 mm – crown cap / cork1.000 L – Ø 87 × H 315 mm – crown cap / corkDimension ...

Maximum speed: approx. 2.00 m/s Installation dimensions: approx. 19,000 × 1,500 mm Quantity: 3 pieces Price per piece

Complete line for twist off caps manufacturing. Air compressor included. Press, scissors, oven, PVC stabilizer, front and side vew cap forming machines

CONTROLS   conventional FEEDSTOCK STEEL STRIP   sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...

Aumann LWS/K 6-160 linear winding machine / production system for niQ stators, year of manufacture 2016. Two identical machines are available. Technical data: compressed air connection 5 bar, mains fuse 32 A, rated current 7.2 A, operating voltage 3 x 400 V / N / PE, 50 Hz, control voltage 24 V DC, connected load 5 kVA. Dimensions approx. 1,950 x 1,970 x 2,150 mm (L x W x H). The machines are offered including documentation. An on-site inspection is possible by appointment.

A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control o ...

The line consists of the following devices: M-2500 fully automatic line for gluing mattresses using the HotMelt method, M210A - conveyor conveyor, M210 P - baling conveyor, M2100 - automatic mattress packing machine. Year of manufacture 2019

Labelling line with two print and apply stations, This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control., The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-nederland-labelling-line-with-two-p rinters/, Type: Labelling line with two print and apply stations, Stations: 2, each with printer and label reel, Controls: Display per station, push-button panel with emergency stop, Construction: Stainless steel frame with conveyor

Blowing machine SIG Blomax 8 KHS Aseptic filler and capper Capacity: approx. 15.000 bph based on 0,5 ltr. PET bottles Filling product: juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system. Year of manufacturing: 2009 consisting of the available machines: "Blowing machine SIG Blomax 8 KHS Aseptic filler and capper Capacity: approx. 15.000 bph based on 0,5 ltr. PET bottles Filling product: juice and tea Bottle size: 500 ml PET bottles Closure type: PCO 28 - 1810 The aseptic system is a wet aseptic system. Year of manufacturing: 2009 consisting of the available machines: Blowing machine SIG Type Blomax 8 Preform feeding System Air conveyor system KHS Aseptic filler and capper Cap feeding unit Chiller (one compressor not working) HEPA Filter Unit Steam, Air, and Water Filter Syste ...

Used Tetra Pak A3 Flex 1000 SQ filling line 7000 PPHTechnical Specifications & Performance DataThis used Tetra Pak A3 FLEX 1000SQ filling line is designed for industrial packaging and beverage production in carton packages. The main filling machine was manufactured in 2005 and is configured for the 1000SQ format, with a production capacity of 7000 packages per hour. The filler has been upgraded from 100V to 300V.Main filling machine: Tetra Pak A3 FLEXMain format: 1000SQAdditional format capability: 500SQ through a quick change kitProduction capacity: 7.000 packages per hourIncluded accessories: 2 paper reels and 1 paper trolleyAdvanced Automation & Control SystemsThe line is arranged as an integrated carton filling and packaging system. Its format-specific configuration supports coordinated operation between the filler, cap applicator, accumulation equipment and cardboard packing section ...

Used Tetra Pak A3 Flex 200S, 100V filling lineTechnical Specifications & Performance DataThis used Tetra Pak A3 Flex filling line is configured for the 200S carton format and is centered on a Tetra Pak A3 Flex 100V filling machine manufactured in 2005. The line includes coordinated downstream equipment for carton handling, straw application and cardboard secondary packaging.Filler: Tetra Pak A3 Flex, version 100V, year 2005Line format: 200SAccumulator: Tetra Pak ACHX30-50M, year 2010Straw applicator: Tetra Pak SA22, year 2009Cardboard packer: Tetra Pak CBP32, year 2009Included accessories: 2 paper reels and 1 paper trolley supplied with the fillerAdvanced Automation & Control SystemsThe filling line is arranged as an integrated industrial packaging system, with the accumulator supporting product flow between filling and downstream operations. The equipment configuration is intended to co ...

Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed p ...

Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: Spindles: 4 + 2 Working width: 230 mm Working height: 120 mm Spindle 1: 7.5 kW / 50 mm / 8,000 rpm Spindle 2: 11 kW / 50 mm / 8,000 rpm Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm Spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Feed rate: 5–24 m/min Control: Nexus PC control NC axes: Unimat 2 & 3, Uniplan 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

A decoiling, straightening and stamping line with roller feed, straightening machine, decoiler and hydraulic press is available, 1) Roller feed WV-U-80/DSM 300 P-N, working direction: left to right, max. strip width: 300mm, strip thickness: 0.1-5mm, max. strip cross-section: 1,000mm², roller diameter: 80mm, max. feed speed: 120m/min, max. roller contact force: 4.5kN, feed accuracy: ±0.05mm, adjustable pneumatic pressure: approx. 5bar, 2) Straightening machine RSTC W60/7/300, working direction: left to right, passage width: 320mm, max. strip width: 300mm, strip thickness: 0.4-5mm, max. strip cross-section: 1,050mm², straightening and correction roller diameter: 60mm, feed roller diameter: 80mm, strip speed: 0-30m/min, feed rollers: 4, straightening rollers: 7, correction roller: 1, drive power: 3kW, 3) Decoiler E 3000/300 OMB, working direction: left to right, max. load capacity: 30kN, ...

A complete line from weigher to shipping case, offered as one set, This automatic line weighs products, packs them in bags and places the bags in shipping cases, in one continuous process. On top sits a Yamato Dataweigh multihead weigher in stainless steel, which doses the product accurately into a GEA CFS SmartPacker SX400. This vertical form-fill-seal machine has the Quattro Seal version, for four-side sealed bags that stand up well. The SmartPacker has automatic film unwinding, integrated sealing units and a touchscreen with recipe management., After packing, a BluePrint Automation HVP system from 2003 takes care of product handling and transport, after which a Rembrandt Packaging / Lantech case packer from 2005 places the bags in cases automatically. The associated conveyor systems are included. The line suits a range of dry and free-flowing products, depending on configuration, and  ...

Tetra Pak ​​​​​​​​​​​​Tetra Therm Aseptic VTIS line with Tetra Alex TA400 homogeniser. Aseptic processing unit for continuous UHT treatment with direct steam injection. Mainly for heat-sensitive low-acid products such as milk, enriched milk, cream, soy milk, formulated dairy products, ice-cream mix, dairy desserts as well as ESL (extended shelf life) products. Previously used in a milk factory in Europe., The unit is fully automated to safeguard the aseptic status while in production. The operation can be divided into four steps:, - Pre-sterilization, - Production, - Aseptic intermediate cleaning (AIC), - Cleaning in place (CIP), Before production can start, it is necessary to sterilize the aseptic area by circulating pressurized hot water. After sterilization, the unit is cooled down to production temperature. Finally, sterile water is circulated through the prod ...

The Fristam FKL 150 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. The rotors are balanced. The diameter of the shaft is up to 25% larger than other manufacturers shafts and is solid made of 316L stainless steel. The FKL 150 is a close clearance PD pump to be designed for True CIP (Clean In Place). Duo - twin wing stainless steel lobes. Nominal displacement: 0,981 liter per revolution. Maximum nominal capacity: 35,3 m3/h. Inlet connection: 3. Outlet connection: 3. Maximum product pressure: 20 bar (300 psi). Maximum pump speed: 600 rpm. The pump is used in a food factory for product pumping. The current motor with this pump is 7,5 kW - 1.445 rpm - 400 V - 50 Hz - 14,8 A and the lobe speed is converted to 147 rpm, which results in a capacity of 8, ...

BEVEL head - 5 axes, SIDEROS table with size 4000 x 6000 mm, SIDEROS external filter ECO16CT DISMANTLING AND TRANSFER TO STORAGE BY SEPTEMBER 2026 Auction-ID: A7-51034-5

SIDEROS ORION 2 table with scraper, year 2014 having dimensions 2600 x 12000 mm, new head and MESSER MULTITHERM4000 oxy-cuttings, year 2008, with PROFIMEC external filter DISMANTLING AND TRANSFER TO STORAGE BY SEPTEMBER 2026 Auction-ID: A7-51034-1

Overview Automatic keg cleaning and filling machine M+F KEG-Technik MINOMAT A 5/4 (1998) with upstream keg outside washer M+F AW 1100 (2000). Compact single-row keg line with roller conveyors for keg infeed and discharge, for kegs with flat fitting. Output 45-50 kegs per hour. Suitable for craft and large breweries. Technical data Manufacturer: M+F KEG-Technik Keg cleaning and filling machine: MINOMAT A 5/4, year of manufacture 1998 Keg outside washer: AW 1100, year of manufacture 2000 Output: 45-50 kegs/h Keg fitting: flat fitting Control: Siemens S5 PLC Power supply: 230/400 V, 50 Hz Control voltage: 24 V DC Operating pressure: 5.5 bar (MINOMAT A 5/4), 3.5 bar (AW 1100) CE marked Scope of Delivery Keg outside washer | M+F KEG-Technik | AW 1100 | brush washing of the keg exterior | 2000 Keg cleaning and filling machine | M+F KEG-Technik | MINOMAT A 5/4 | automatic cleaning and filling,  ...

- Includes 2 parallel mounted crimping lines. - Length of the boards from 2440 mm to 2850 mm. - Width of the boards from 1830 mm to 2100 mm. - Thickness of the boards from 3 mm to 40 mm. - Each line consists of: • Automatic panel loading system. • Paper positioning system. • SIEMPELKAMP press: plate dimensions 2950 x 2200 x 150 mm, maximum opening 270 mm, total pressing force 23940 KN, maximum working pressure 320 Bars, working temperature 220° C, heating of the plates with thermal oil, maximum performance 150 pressing/hour. • Edge cleaning unit. • Tilting cooling table. • Intermediate conveyors. • Artificial vision system. - Automatic strapping machine BIELE and final magazine (common to the 2 lines). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of th ...

AEROTERM UV coating line was built in 2015 in the Czech Republic by AEROTERM a.s. The line was only used once for testing and is like new. The line is used for the automatic UV coating of flat components made of wood or metal. The process is performed continuously, without the need for manual handling of the workpieces. Transport between the individual stages is performed using a conveyor system. The system consists of: – loading conveyor belt – BSA 900uvkpa automatic spraying machine – ULTRATERM UV770/240two-kpa UV dryer – control system – coating application system UV coating is carried out in the AEROTERM BSA 900uvkpa automatic spraying machine. The unit is equipped with two spray arms, each with two spray guns. The spray guns are designed for applying solvent-free, non-flammable UV varnishes and paints. Their position can be adjusted according to the dimension ...

Schneidlinie Autotrimm PACE / Cutting Line Autotrimm Polar 137XT-AT PACE Cutting system of performance class "PACE" raise the efficiency by up to 100 percent compared to a conventional CuttingSystem The workflow: A loading lift takes the material to be cut onto the optimal working height for the operator who puts it on the automatic jogger. After jogging is completed, the Autotrans gripper system transports the material onto the rear table of the high-speed cutter.  On the rear table, the Autoturn turning gripper moves the material in an automated way. After cutting is completed, the POLAR Transomat E unit automatically stacks the reams on pallets while cutting can be continued. Schneidlinie Autotrimm PACE / Cutting Line Autotrimm Polar 137XT-AT PACE  Year 2007 - Serial-No. 7641622 Schnittbreite / Cutting width max. 1370mm Autotrimm Programm - Duisplay / Program - Displ ...

A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible.

Used Tetra Pak TBA19 200 slim V020 line, 7500 PPHTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak TBA 19 200 Slim V020 aseptic carton filling line for industrial packaging and juice beverage production. Manufactured in 2004, the line is configured for the 200 Slim carton format and includes a straw applicator for complete retail-ready package preparation.Manufacturer: Tetra PakModel: TBA 19 200 Slim V020Year: 2004Production speed: 7,500Package format: 200 SlimProcessed product: JuiceOperating hours: 51,870Included equipment: Straw applicatorAdvanced Automation & Control SystemsThe TBA 19 platform is designed for automated carton handling, forming, filling and sealing within a continuous beverage production process. The line is supplied with its complete paper documentation, supporting operation, service activities and technical reference. Electrical confi ...

Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve contro ...

High-pressure centrifugal pump Grundfos CR120-6-1 used, 55 kW, 120 m³/h flow rate, 127 m head good condition

Used Aerotech Unidex 21 Motion controller in Server rack with 3 x Aerotech Linear stage 3 x Servo controller 1250 DC Linear stages with controllers Auction-ID: A1-50936-151

Lots of shop furniture and complete layout 140 uprights and many different possibilities 13 Panels for Presentation Display ABOUT 25 TO 30 ROLLS OF TRANSPORT PROVIDED FOR LOADING Auction-ID: A1-51213-51

Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature ...

See nameplate Auction-ID: A7-51245-105

Used AMOS filling line for natural juice 2500 Kg/hTechnical Specifications & Performance DataThis used bottling line is a complete processing and filling system for 100% natural juice production in Bag-in-Box packaging. Manufactured by AMOS in 2013, the line is designed to receive apples, prepare and press the fruit, filter and collect the juice, pasteurize the product and fill it into 3L and 5L Bag-in-Box bags.Manufacturer: AMOSYear: 2013Processing capacity: 2,500 kg of apples/hFilling output: 1,000-1,200 bags per 8 hours of operationPackaging formats: 3.0L and 5.0L Bag-in-Box bagsJuice storage: 2 tanks x 500LElectrical supply: 380V, 3-phaseAdvanced Automation & Control SystemsThe equipment is connected to the utility network and operates with electricity, water, compressed air and diesel for the pasteurization stage. The compressor supplies air to the press, pasteurizer and filler, sup ...

Used TM INOX brewery line 70 hl - Year 2014Technical Specifications & Performance DataThis second hand brewery processing line is configured for beer production, covering key stages from brewhouse operations and yeast handling through fermentation, filtration, cooling, utilities and laboratory control. The equipment inventory combines components manufactured between 2004 and 2014, with a main electrical cabinet dated 2012 and fermentation control equipment dated 2013.Brewhouse vessels: two 3.5 m3 mash boiling tanks, a 7.8 m3 malt filter tank, a 7 m3 hop boiling tank, a 7.2 m3 buffer tank and a 7.5 m3 whirlpool tankYeast section: 2.1 m3 yeast tank and 1.5 m3 sterile tankUtility capacity: steam generator rated at 1,500 kg/hFiltration: kieselguhr filter, sterile filtration unit and beer flow meteringAdvanced Automation & Control SystemsThe brewery includes dedicated electrical and control i ...

General Description Industrial automatic packaging and carton closing line manufactured by LIGMATECH , model VKC 100 . Designed for automated handling, packaging and closing of cardboard packaging in industrial production environments. Technical Details Manufacturer: LIGMATECH Model: VKC 100 Machine type: Automatic packaging / carton closing line Code: 003010-03 Serial number: 0-303-10-1095 Year / marking: 03/19 Automatic carton handling and closing system Industrial production-line configuration Condition Used industrial condition. Operational status, production capacity, electrical specifications and complete configuration of the packaging line have not been independently verified. Dimensions Dimensions of identified module: 1,700 × 700 × 2,000 mm Weight of identified module: 420 kg Auction-ID: A7-40559-2

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 1.500 kg per hour and is designed for an input of approximately 3.000 litres of cultered or / and sweet cream per hour (38/42% fat, pH of 4,5/4,8 and infeed temperature ± 10 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 22 kW, Churning cylinder II: 2,2 kW and Squeezer / Working section: 5,5 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danf ...

A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible.

A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible.

Single piece loading dimensions: 400 x 600 x 200 mm (box 50 pcs) Auction-ID: A7-51355-1031

LINCK V30 chipper-canter line with integrated VS pre-cut saw for continuous operation, year 2000. Suitable for processing side boards and changing log dimensions. Circular-operation clamping technology, PLC control, frequency-controlled feed and synchronised clamping/sawing units. Example data: feed speed up to 150 m/min, log lengths 3.0–5.2 m, top diameter approx. 8–62 cm, resaw cutting height up to 350 mm. Modular system prepared for additional milling and sawing units. Overhauled and serviced in 2025.

Used BERTOLASO filling line 1800 BPH - Year 2010Technical Specifications & Performance DataThis used bottling line is configured for bottle rinsing, filling, capping, inspection, labeling, sleeve application and case packaging. The declared maximum line speed is 30 bpm. Main bottle-handling equipment includes Bertolaso rinsing, filling and capping units, supported by inspection and rejection equipment, a BRB labeling machine, a Tripack sleeve applicator and downstream case-packing machinery.Declared maximum line speed: 30 bpmRinser: Bertolaso MINIBL OLIMPIA 12-12-1, 2019Filler and capper process equipment rated at 30 bpmLabeling machine: BRB Globus Mega ADE 644 CW, 48 bpm, 6 bottle platesHeat tunnel: Axon EZ-24-BR, 25 bpmCase erector: Bortolinkemo EOC 25/27, 37 cpmHot melt glue system: Nordson PROBlue 10, 60 cpmShrink sleeve material lay-flat range: 40-165 mmAdvanced Automation & Control ...