126,718 used machines on RESALE, but how to find them? Machine Search
Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 60,000,Bottom floor: flat bottom with slope,Top floor: conical bottom,Design: upright,Insulation: available,Diameter inside: 3,500,Diameter outside: 3,610,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyes,Outlet: present,Outlet : 80,Remarks: Container feet are spacers for the substructure/foundation. Inside small repair points,last use: foodstuffs,material in contact with the product: V2A 1.4301
Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Bottoms: conical bottom,Design: upright,Standing form: Stand frame,Insulation: available,Diameter inside: 3,700,Diameter outside: 3,880,Total height: 9,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Last use: Foodstuff,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Beam stirrer,Bottom bearing: Yes,Current interferer: No,Agitator arrangement: eccentric in the topsoil,floor bearing: no,power interferer: no
Used storage tanks for beverage industry Approximately 400 tanks with different capacities Additional 18 "ASEPTIC" tanks, each with a capacity of 165,000 liters
A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.
Two identical insulated double-jacket cooling tanks Möschle are available. Vessel volume: 15500l, jacket volume: 60l, max. jacket pressure: 3bar, max. medium temperature: 50°C, min. medium temperature vessel/jacket: 18°C/10°C, diameter: 2650mm, overall height: 4800mm. Including permanently installed agitators. An on-site inspection is possible.
Roll-off container TECHNICAL DATA: External dimensions: 7.28 x 2.46 x H 2.44 m Interior dimensions: 6.94 x 2.31 x H 2.19 m Suitable for garbage collection
11700L Square Vessel - Atmospheric Vertical stainless steel tank 11700L Gross Volume Manufacture: Moeschle Behalterbau GmbH Height Approx 2700mm Width Approx 2500mm Depth Approx 2550mm Double Walled Insulated Stainless Steel Clad sides Cooling Jackets 2" RJT Bottom Outlet Smaple Point 1.5" External Down Pipe Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Kettle (12,000 litre vessel) Manufactured By Moeschle estimated 50BBL working capacity Vertical cylindrical Stainless steel (316) vessel OD 2400mm ID 2200mm Overall height APPROX 5250mm 2” RJT Bottom outlet Top and Side entry man way door External Steam heating Jackets on tank shell Insulated 150mm thick with stainless steel cladding over Year of Manufacture: 2001 Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
2000L Vessel - Atmospheric Vertical stainless steel tank 2000L Gross Volume / 1630L Working Volume Manufacture: Fabdec / 2014 Dished Top & Bottom Insulated Stainless Steel Clad sides Cooling Jacket Bottom Outlet 1.5" RJTF High Level Side Port 1.5" RJTF Top Port (CIP) 1" RJTM Detachable Spray Ball Top Manway Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Porter Lancastrian 5BBL Vessel - Second Hand Vertical stainless steel tank Manufacture: Porter Lancastrian Dished Top & Bottom Diameter Approx 1000mm Single Skin Stainless Steel 1.5" RJTF Both Top and Bottom Ports Side Manway 2 x Sight Glasses 3 x Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
1000L Vessel Horizontal stainless steel Manufacture: Mueller (NL) Year of Manufacture: 2013 Diameter Approx 1000mm Height Approx 1100mm (including motor) Length Approx 2400mm Stainless Steel Single Skin Bottom Outlet DIN Butterfly Valve Working Pressure 3bar Pressure Gauge Stainless Steel Cradle/Frame with Four Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
11800L Square Vessel - Atmospheric Vertical stainless steel tank 11800L Gross Volume Manufacture: STB Engineering / 2014 Height Approx 2700mm Width Approx 2550mm Depth Approx 2550mm Insulated Stainless Steel Clad sides Cooling Jackets 1.5" RJT Pipework & Fittings Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
12.500 litre, Stock number: T671, Litre: 12.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: In cradles, End bottoms: Conical, Tank cover: In end bottom, Agitator: Flange for agitator in end bottom, CIP: Yes, Inner diameter: Ø 2300 mm., Dimensions: L 2950 mm., Manufacturer: Kolding DDMM
10.000 litre, Stock number: T3967, Litre: 10.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: Yes, End bottoms: Conical, Tank cover: In the end, 520 x 390 mm., Inner diameter: Ø 2150 mm., Dimensions: L 3200 x W 2150 x H 2300 mm., Total height: H 2400 mm., Manufacturer: Kolding DDMM, Other: Prepared for agitator
500 litre, Stock number: T2209, Litre: 500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with hinged lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, from the lid in top, Motor: 0,4 kW - 380 Volt - 384 rpm., Working pressure double jacket: Max 0,5 Bar, Inner diameter: Ø 1000 mm., Outer diameter: D 1150 mm., Total height: H 1650 mm., Manufacturer: Kolding DDMM
300 litre, Stock number: T3626, Litre: 300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, CIP: Yes, Inner diameter: Ø 760 mm., Total height: H 1350 mm., Manufacturer: Kolding DDMM, Other: Inspection cover in the top
Vertical Cylindrical Conical Bottomed Fermenter 8000L - Brim Full Capacity Side entry manway doors Cooling Jackets, insulation and cladding Manufactured in 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
3.300 litre, Stock number: T2657, Litre: 3.300, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Frame agitator from the top with bottom guideway, CIP: Yes, Inner diameter: Ø 1700 mm., Outer diameter: D 1856 mm., Total height: H 3350 mm., Manufacturer: Kolding DDMM
6.500 litre, Stock number: T3981, Litre: 6.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the side, 500 x 370 mm., Agitator: From top with bottom guideway, Agitator type: Mixing wing, Motor: 1,5 kW - 230/400 Volt - 58,5 o/min., CIP: Yes, 3 pcs., Inner diameter: Ø 1900 mm., Total height: H 3870 mm., Manufacturer: Pasilac, Model/type: MAV
Features Volume 31000 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 5 Total height 5200 mm Height 4150 mm Diameter width 3000 mm Surface inside IIID Surface marbled on the outside Agitator Propeller Description Topsoil: Inclined cone base 2 crane eyes Threaded Sockets Tank cylinder: Level indicator with bar and scale Manhole 440x340 mm Sample tap DN 15 Ladder hooks Downward-swept CIP cable DN 50 3 x clear drain: 2x with disc valve DN 50, 1x with angled seat valve DN 50 Rear mixer on the side Underbody: Inclined cone base forward-drawn residual drain pipe with angled seat valve DN 50 5 fixed feet
1000 Litre Stainless Steel Second Hand Tank Capacity: 1000L / 220 Gallons / 6 Barrels Vertical Stainless Steel Vessel, with dished top and dished base Free standing on 3-off stainless steel legs with adjustable feet Working pressure 1 Bar Empty weight: 100kg approx. Fittings: 1 x DN40 Top Inlet 1 x 120mm Diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
30.000 litre, Stock number: T2034, Litre: 30.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Lying: For burial, End bottoms: Dished, Outer cladding: Fiberglass coating, Tank cover: In the top, bolted, Ø 500 mm., Inner diameter: Ø 2480 mm. , Total length: L 6800 mm., Manufacturer: Gjettermann & Nielsen, Year: 1980/82
Used Tetra Pak aseptic tank. Year of manufacture: 2010. Capacity: approx. 13,000 litres. Valve system: Equipped with cluster valves for effective product flow control, reduced contamination risk and easy integration with aseptic production lines. Suitable for aseptic storage of milk, flavoured milk, juices, liquid dairy products and other sensitive food products requiring sterile conditions. Key features: - Maintains product sterility - Supports CIP (Cleaning-in-Place) systems - Ensures a longer shelf life for stored products - High-quality stainless steel construction (compliant with Tetra Pak standards)
Bibby 5000L Holding tank 316 Stainless, 5000L holding tank, central bottom discharge with level sensor
60.000 litre, Stock number: T4010, Litre: 60.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On a skirt with bracing and strengthening, Top: Conical, Bottom: Conical, Tank cover: 2 pcs, in the top, Ø 480 mm. and in the side, 430 x 530 mm., Agitator: Prepared for agitator in the side, Inner diameter: Ø 3400 mm., Total height: H 7700 mm., Manufacturer: Kolding DDMM
15 BBL working capacity stainless steel vertical cylindrical mash tun, with side entry door for spent grains removal. Drilled plate floor removable in 4 sections. Sparge arm and bridge. Vessel is free standing on stainless steel removable legs. Has a 2" RJT Female outlet. Lid consists of one half moon shape section. Overall Height from ground - 2500mm Internal Diameter - 1550mm Overall Diameter - 1650mm Internal Vessel Height - 1550mm 50mm of insulation to the shell, with stainless steel cladding pop riveted. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Steam tank with pneumatic opening - Lenght mm. 2100 - Diam. mm. 700
Mash Tun 5bbl working capacity, vertical cylindrical stainless steel vessel, with side entry door. Sparge Bridge with CIP spray ball. 2 section lift of lid. 2 section drilled plate floor. Year of Manufacture: 2015 This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Equipment: Agitator,Condition: used,Volume: 43,000,Design: upright,Base: feet,Number of feet: 6,Diameter outside: 3,000,Cylindrical height: 6,000,Total height: 8,000,Manhole / dome: in cylinder,Nameplate: No,Equipment: crane eyelets,Outlet: available,Outlet : 65 / 80,last use: foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Power: 5,Speed: 36,Agitator: Inclined blade stirrer,Voltage: 400,Bottom bearing: Yes,Current interferer: No,Agitator arrangement: eccentric in the topsoil,agitator arrangement: on the side of the cylinder,speed: 18,bottom bearing: no,power:
Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
40BBL/65HL Conditioning tank manufactured by DME Vertical cylindrical single skin tanks for use in a chilled room . Dimensions approx: Diameter 2200mm Overall height 3,700mm Tanks are stamped – Certified by Meuller Originally designed for 15PSI Side entry manway door and C.I.P Arm Working capacity is 40UKBBL/65HL with 11% head space This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
50BBL/80HL conditioning/bright tanks MANUFACTURED BY BRABY YOM 1973 Test pressure 45PSI Working pressure 30PSI Vertical cylindrical single skin tanks . Side entry manway door and C.I.P Arm This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Stainless Steel Vertical Cylindrical Tank 2000L. Single skin with side entry manway and top inspection port. Lifting eyes Sight level gauge. Sample Tap Racking point with valve. Bottom outlet with DIN40 butterfly valve. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Stainless Steel Mash Tun 1800L. Manufactured: 2015 Manufacturer: Brewing Vessels Ltd. Insulated with 80mm of insulation. Side entry manway. Sight level side window. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Hydrochloric acid plant for the regeneration of ion exchangers in water treatment 8m3 hydrochloric acid tank incl collection tank 1m3 measuring tank Prominent Dosing Technology
Equipment: heatable/coolable, insulation, agitator,condition: used,volume: 16,000,design: upright,base shape: feet,number of feet: 4,heating/cooling (filter bar): available,temperature control cylinder: double jacket,temperature control underbody: double jacket,insulation: available,insulating jacket: hermetically welded,material insulating jacket: stainless steel,diameter inside: 2,400,cylindrical height: 3,550,total height: 6,000,manhole / dome: in the upper floor,nameplate: no,equipment: Venting, crane eyelets,Outlet: available,Outlet : 50,Remarks: Double jacket with trickle ring - only for non-pressurized
Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 1000l, level indicator: available. An on-site inspection is possible.
Three stainless steel tanks Speidel, equipped as fermentation tanks, are available. Volume: 330l, level indicator: available. An on-site inspection is possible.
1000L Horizontal Tank Stainless Steel 6 Barrels / 220 Gallons. Horizontal stainless steel vessel, dished ends. Free standing on 4-off stainless steel legs with adjustable feet. 1½” RJT Female Top inlet. 1 x 120mm diameter Viewing Glass 1 x DN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
900L Vertical Tank Stainless Steel Working capacity 5 Barrels / 200 Gallons. Vertical stainless steel vessel, dished top and base. Free standing on 3-off stainless steel legs with adjustable feet. DIN40 Top inlet. 1 x 120mm diameter Viewing Glass 1 x DIN40 outlet with butterfly valve and DIN Male end This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Equipment: Insulation,Manufacturer: TUCHENHAGEN,Condition: used,Volume: 30,000,Max. permissible Operating temperature : 80,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Insulation: available,Insulating jacket: hermetically welded,Material insulating jacket: stainless steel,Diameter inside: 2,900,Cylindrical height: 4,500,Total height: 7,000,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation, crane eyelets,Outlet: available,Outlet: 65,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Power: 1.2 /
Equipment: Insulation, agitator,Condition: used,Volume: 125,000,Lower floor: flat floor with slope,Design: upright,Standing form: Standing frame,Insulation: available,Material insulating jacket: Painted steel,Diameter outside: 3,900,Cylindrical height: 11,000,Total height: 12,800,Wall thickness underbody: 4,Wall thickness cylinder: 4,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/ventilation, crane eyelets,Outlet: available,Outlet : 65,Note: Pressure points on the insulating jacket, last use: foodstuffs,material in contact with the product: V2A 1.4301 (AISI304),agitator:
An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible.
Equipment: Overpressure,Manufacturer: RIEGER Behälterbau GmbH,Condition: used,Volume: 83,500,Max. overpressure: 0.5,Max. permissible overpressure Operating temperature : 50,Specific gravity of the medium: 1.35,Design: upright,Stand shape: feet height adjustable,Number of feet: 8,Diameter inside: 3,850,Cylindrical height: 600,Total height: 8,690,Wall thickness underbody: 5.4,Wall thickness upper floor: 3.0,Year of construction: 2004,Technical documents: Drawing,Manhole / dome: in cylinder (approx. 350 x 450 mm),Type plate: Yes,Equipment: Ventilation/ventilation, spray head, crane eyelets,Outlet: DN100 DIN 11851 ,Remarks: Specified total height
Equipment: Insulation, agitator,Condition: used,Volume: 100,000,Bottom: Conical bottom,Lower bottom: Conical bottom,Design: upright,Insulation: available,Insulating jacket: welded,Insulation material: Rock wool,Insulation thickness: 50,Ground clearance: 900,Diameter inside: 4,000,Diameter outside: 4,135,Cylindrical height: 8,000,Total height: 10,830,Total width: 4,300,Total length: 11,000,Manhole / dome: in cylinder,Nameplate: Yes,Equipment: Crane eyelets,Outlet: DN65 DIN 11851 , Remarks: we can not guarantee the agitators,last use: food,material
Equipment: Overpressure,Manufacturer: Bertsch,Condition: used,Volume: 67,000,Max. overpressure: 1.0,Max. permissible overpressure Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 3,000,Cylindrical height: 8,870,Total height: 11,100,Wall thickness underbody: 9,Wall thickness cylinder: 5,Wall thickness upper floor: 6,Technical documents: drawing, acceptance certificate,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet : 100,Remarks: Total height according to drawing (slight deviations possible) Manhole cylinder NW 600,last
maximum number of results exceeded
please refine your search
