pro minent used for sale

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg

The offered enrobing machine is in very good condition. It is currently still in use and can be viewed on site. Further information is available on request. The pressing machine that can be seen at the end of the production chain is not part of this offer, but is also for sale (see our other listings).

Proximity switch, cylinder sensor, magnetic field sensor -Diameter: 6.5mm Length: 30 mm -Cable length: 2 m -Product type: IFR 06.26.15 -Number: 5x available -Price: per piece -Weight 40 g

Cable protection ring -Type: KSR-910 Light Grey -Cable protection rings per package: 25 -Packages: 15 pieces -Price: per package -Weight: 3.6 kg

Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK

Channel folding machine, folding machine, folding former, seam closing machine, folding former, sheet metal bending machine, profiling machine -Rolls: 20 -Distance rings: 14 -Executions: different -Take: Ø 28 mm -Price: complete -Weight: 21.4 kg

Thermoplastic polyurethane elastomers, pressure hose, air hose, plastic hose -Mesh protection hose: red -Number: 4 boxes available -Price: complete -Dimensions: 375/285/285 mm per box -Total weight: 18.5 kg

Bosch Rexroth aluminium profile workstation Bosch Rexroth aluminium profile Complete plastic glazing 4 cm worktop with a light grey melamine resin direct coating 190 x 90 cm Dimensions of the workplace WxDxH 195x93x220 cm Magnifier Magnifying Lamp 8062D2 More items new and used - you can find them in our shop! International shipping costs on request!

proximity switch -Manufacturer: IPF Electronic -Product type: IN 40 60 40 -Number: 37x available -Price: per piece -Weight: 300 g

Cable protection ring -Design: extra long -EWEM / XL: 4 x 35 - 150 mm² -Number: 2 pieces -Price: complete -Dimension: Ø 62 x 220 mm -Weight: 0.1 kg/piece

Thermostat, sensor -Adjustment range: -10...+12 -Weight: 0.7 kg

Thermostat, sensor -Adjustment range: -10...+12 -Number: 2x available -Price: per piece -Weight: 0.7 kg

Key data: 3050 mm, 1200 mm, 120 mm

Technical version: Console table 3050 x 1200 mm with manually movable 6 brackets, 2 vacuum cups per console and a pneumatic excavation rail Spot laser set-up aid, vacuum pump CNC control XILOG Plus Main spindle 7.5 kW HSK 63F with C-axis, 1500 – 24,000 rpm Tool changer plate 10-fold 1 adapter unit swivel saw Drill head with: 12 vertical spindles, 4+2 horizontal spindles, groove saw Installation dimensions: 6800 x 3040 mm Weight: 2850 kg

Central processing unit, control, switchgear, CPU -Central unit CP476 product number: 7CP474.60-1 -Interface module IF371 product number: 7IF371.70-1 -Analog output module AO352 product number: 7AO352.70 -Dimensions: 153/155/H62 mm -Weight: 0.7kg

Channel folding machine, folding machine, folding former, seam locking machine, folding former, sheet metal bending machine, profiling machine -Number: 14 pieces rolls -various: versions -Recording: Ø 28 mm -Price: complete -Weight: 22.5 kg

table diameter: 200 mm workpiece height: 100 mm number of wheels: 1 Control: Robot CNC total power requirement: 6 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - F ...

Respiratory protection filter -Clean AIR: basic 2000 -P SL R Art. No.: 80 00 10 -Price: per piece -Number: 17 pieces -Dimensions: Ø 131/54 mm -Weight: 0.1 kg/piece

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 7111 Type: NEXUS 510 C Producer: MAZAK Created: 2008 Parameters: Control system: MAZATROL MATRIX NEXUS Duty cycle: 14206 h Hours: 4777 h Work table length: 1300 mm Work table width: 550 mm Spindle drive power: 11 kW Speed: 12,000 rpm X-axis travel: 1050 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: ISO 40 Number of stacking positions: 30 pieces Machine weight: 6886 kg Equipment: Tool Probe IKZ

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Circular saw motor in: flat design -Motor: 1.85 kW 2870 rpm at 50 Hz -Shaft holder: Ø 30 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/120/H185 mm -Weight: 15 kg

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Width: 730 mm -Extendable to: 1600 mm -Number: 2x covers available -Price: complete for 2 pieces -Dimensions: 1600/730/165 mm -Weight: 34 kg/piece

Used production line for packaging juices. The line consists of: - TRIBLOCK ARROW PET 9/9/3, NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) STM 2014 - BUFFER TANK 1000L STM 2014 - CIRCULATION TANK 80L STM 2014 - PUMPS WPS 4 - 2 PCS, RETURN PUMP CIP WPS 6 1 PCS STM 2014 - NUT FEEDER BCF1 STM 2014 - AIR CONVEYOR SET STM 2014 - PLATE CONVEYOR SET STM 2014 - ROTARY COLLECTING TABLE STM 2014 - PET BOTTLE ORIENTATOR SB6000 STM 2013 - SCREW CAPPER ZB 6000, NUMBER OF HEADS 6, OUTPUT 6000/HOUR STM 2013 - PRINTER HITACHI INK JET UX HITACHI 2016 - LABELLING MACHINE EC-09/ LABELER EC-09 BIENKOWSKI 2018

max. film width: cm max. speed: /h serial no.: 55C P0009 inlet width: 55 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.: 00701 weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 1400 kVA at 60 Hz, 1200 at 50 Hz - Currently set to 50 Hz! Hours: 778 Cooling: Water Speed: 1500 1/min Tank: 2000 liters Generator: Leroy Somer LSA 50 VL 10 Voltage: 400/231 V, 50 Hz Control Panel: LS 2000 A Generator, DSE 8610 MKII Deep Sea Control Was used as an emergency power system, therefore few operating hours Control and circuit breaker new! Subject to prior sale - errors possible! Internal Reference Number: E-1004-69

Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete -Dimensions: Ø 200 x 81 mm -Weight: 11 kg

Respiratory protection filters -Art. No.: 500 01 67 A2B2-P3 -Price: per piece -Quantity: 8 pieces -Weight: 0.5 kg/piece

Used production line for paints and varnishes from Diamac. The line includes: -2 x dissolver stationary 50hp, 1500 litres: diamac - industrial tyntometer: diamac (installation brand new, never used) - stationary mixer diamac 30hp inverter - stationary mixer slow speed diamac 10hp - column disolver diamac 15hp inverter - laboratory disolver diamac 2hp inverter - immea semi-automatic controller/ filler model dpc/5/30 - dust filter, pneumatic brand: wam - volumetric pumps for resin transport/dosing brand: pedrollo additional: - documentation, operating instructions, "ce" safety certificates, etc.

Respiratory protection filter -PAPR-A1B1E1P3 -Price: per piece -Number: 2 pieces -Minimum purchase: complete -Weight: 0.2 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Process controller, controller, pressure regulator, temperature sensor, temperature setting -Manufacturer: HESCH -Type: HE 048 -Dimensions: 210/200/H110 mm -Weight: 1.6 kg

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Proportional pressure regulating directional valves, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Operating pressure: 0-6 bar -Number: 2x valves available -Price: per piece -Dimensions: 110/45/H55 mm -Weight: 0.4 kg

-WP fully automatic proofing machine Manufacturer: Werner & Pfleiderer Bakery Cooling -Type: GUV -for 4 trolleys -External dimensions approx.: 192x200cm WxD and 255cm high -Inner dimensions approx: 169x140cm and 200cm high -without refrigeration compressor -Refrigerant: R 404A

Z-roll forming machine for sheet metal of ventilation duct production max. 1.0 mm sheet thickness 2500 mm sheet width

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: SIPART DR24 -Price: per piece -Number: 1x available -Weight: 1.5 kg

PLC control -Type: CP343 6GK7343-1CX21-0XE0 -Communication processor CP343-1 for connecting Simatic S7-300 to Ind. Ethernet -Number: 15x available -Price: per package -Weight: 0.4 kg

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Number: 55x Profibus plugs available -Price: per piece -Weight: 0.04 kg/piece

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Punches e.g. 30 mm diameter in 20 mm flat bars Quick-change device Assortment of tools is included in the price Weight: 3,000 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Key data: 1625 mm, 860 mm, 760 mm

Control Ultimax 4 Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Tool magazine for 40 Wkz., SK 40 IKZ Conveyor

PLC control, Siemens Simatic Net CP Profibus, communication processor -Type: 6GK7443-5DX03-0XE0 -Communication processor: for connecting Simatic S7-400 to Profibus -Dimensions: 290/210/H25 mm -Weight: 0.71 kg

Caterpillar 3512C marine propulsion engine 2 units available year: 2005 1765 Kw at 1800 RPM includes Reintjes gearbox with 7.455/1 ratio 3500 Working hours only

Inv. Num. : 7256 Type: RFM 600/2 Producer: Röders TEC Created: 2000 Parameters: Work table length: 700 mm Work table width: 550 mm X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm

Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UN62-00-2H -Price: per piece -Number: 1x available -Weight: 0.8 kg

Protective cover for milling curved parts on the ring etc. This protection device is often recommended by the BG. Maximum milling cutter diameter 160mm With thrust ring, brushes and brake wedge for the inrun bearing Obviously hasn't been used much so far. Year of construction unknown The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Motor protection relays, relays, heating current monitoring, pre-heating for generators, contactor, semiconductor contactor, contactor -Type: 3UA60 00-2X -Price: per piece -Number: 1x available -Weight: 0.8 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 20 mm -Thread: right -Dimensions: 200/70/H85 mm -Weight: 1.9 kg