136,418 used machines on RESALE, but how to find them? Machine Search
- Roll to roll cutter -Year 2008, max roll diameter 450 mms. -Max width 360 mms . -Inverter with speed control -Many cutting devices for any size
Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine
Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours
Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm
Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons
Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
- Baking Plate Amount: 76 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,100 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!
- Baking Plate Amount: 100 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: max. 5.700 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!
- Baking Plate Amount: 73 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: approx. 4,000 pieces / Hour - Cone Size: max. 230 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Transport Unit with Wafer Turner - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025
- Condition: used - Baking Plate Amount: 45 Baking Plates - Capacity: approx. 2.500 pieces / Hour - Cone Size: 19°, Length: approx. 75 mm, Ø approx. 35,75 mm - Engraving: without engraving Equipment: - incl. Drum Roller - incl. Stacking Table
- Condition: used - Baking Plate Amount: 45 Baking Plates - Baking plate Size: 260 x 240 mm - Capacity: approx. 2,200 - 2,800 pieces / Hour - Cone Size: max. 200 mm - Engraving: 5 x 5 mm Equipment: - incl. Cooling Conveyor - incl. Stacking Table
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
rolling capacity max.: t workpiece diameter: 470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2070 mm plate thickness: 4 mm distance between columns: 2100 mm diameter of upper rolls: 140 mm total power requirement: KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1270 mm plate thickness: 3,0 mm distance between columns: 1300 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm tube diameter: 140 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.
Manufacturer: Cefla Model: GlassCoater F13 EVO Year of Manufacture: 2011 Electrical Specifications: - Voltage: 400 V - Frequency: 50 Hz - Total Installed Power: 2.1 kW CE Certified: Yes Find more here - .ucymachines/ Contact us at - sales@ucymachines
A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.
Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo
Loading and unloading of automatic parts / Automatic loading and unloading of parts, High: 1,750 mm., Long: 2,200 mm., Width: 2,000 mm., Weight: 12,000 Kg., Rack face width: 92 mm, Rack length max: 610 mm, Main motor power: 15 Cv, Workpiece ø max.: 41 mm, Max / min. pitch form: 20 / 40-32 / 64, Range module max / min.: 1.5 / 0.39, Maximum stroke of tools trolley: 760 mm, Specification: Roto-Flo
grinding diameter: 140 -1260 mm grinding length: 5000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 800 x 80 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 35000 kg spindle drive: 30 kW grinding wheel turining speeds: 720 - 1800 U/min feeds of grinding head: 60 - 4000 mm/min grinding feed: 0,0125 mm/U working spindle drive: 45 kW work piece spindle speed: 240 - 2400 U/min total power requirement: - kW weight of the machine ca.: - t 2008 Electrical Upgrade Computer Controlled Allen Bradley Powerflex Digital Drives Allen Bradley 1606-XL Power Supply N-Tron 508 XT Ethernet Card Allen Bradley Panelview Plus 1250 Digital Readouts Allen Bradley PLC CompactLogix L32E - Crowning and Cambering Capabilities - Stationary Rotating Roll with Travelling Grinding Carriage - 2 Steadies - Servo Drives: Headstock & Grinding Wheel, - Rapid Traverse C ...
grinding diameter: 250 - 1650 mm grinding length: 1000 - 8000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 760/900 x 100 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 75000 kg spindle drive: 66 kW grinding wheel turining speeds: 375 - 1125 U/min feeds of grinding head: 35 - 2600 mm/min grinding feed: 0,0025 - 0,05 mm/U total power requirement: - kW weight of the machine ca.: - t Rough Grinding, Finish, Fine & Superfinish Grinding Re-Conditioning Work Rolls and Back-Up Rolls Hard & Soft Rubber Rolls Machining of: Cylindrical, Convex and Concave Rolls of Various Materials 2018 Electrical Upgrade Allen Bradley PowerFlex Digital Drives 755 Allen Bradley 1609 SPO Ethernet Network Card Allen Bradley PLC - Continuous In-Feed Mechanism of the Grinding Wheel for Compensation of Wheel Ware - Dynamic Wheel Balancing - Electronic Vibration ...
Key data: 762 mm, 3048 mm, 813 mm
Minakuchi CNC Cylindrical Roll Grinder Year of Manufacture: 1990 Control: Fanuc Series O-GC (parameters need reloading) Technical Specifications: • Max. Swing: 32” (813 mm) • Distance Between Centers: 120” (3048 mm) • Max. Grinding Diameter: 30” (762 mm) • Grinding Wheel Size: 24” x 1.968” x 10” • Max. Grinding Wheel Width: 1.968” • Spindle Speeds: 1410 / 1530 RPM • Grinding Wheel Motor Power: 30 HP • Workpiece Weight Capacity: 20,000 lbs (approx. 9,070 kg) • Machine Weight: Approx. 30,000 lbs (13,600 kg) Equipped With: • Fanuc Series O-GC CNC Control • Remote hand wheel • Control Panel with Jog / Auto / Handle Modes • Spindle inching, feed hold, emergency stop, ZRN • Taper and crowning grinding capability • Wheel head motor • Work head & tailstock • Work rest supports • Extra wheel hub • I. ...
Roller sets for profile bending machine HERKULES WETZLARThe rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N for 3-roll ring bending machine, also come from such a machine.Shaft diameter 80/60 mmRoller diameter 160/180 mmRoller width max 180 mmThe machine had 2 driven rollersWeight of all rollers approx. 100 kggood condition; used
Eccentric punching machine HAULICK + ROOS type RVD 125Double column - Eccentric pressMasch. No. 212560 Year of construction 1981Compressive force 125 ton. Table size 880 x 800 mmTable opening 470 x 140 mmStand width 900 mmStand width laterally 415 mmRam stroke 45 mmRam adjustment range 0-80 mmInstallation height in the picture 340 mmStroke rate 50 to 300 strokes/min. Engine power main drive 22 kWNe-connection 380 Volt, 50 Hz- Double connecting rod engine with 4-bearing eccentric shaft for off-center tappet pressure
DAVI MCA 1513 4-roll plate rolling machine was built in 2023 in Italy by Promau S.r.l.. This highly efficient machine is the perfect choice for precision rolling of cylindrical, elliptical and conical forms. Sheet metal with a maximum thickness of 6,5 mm is machined fully automatically by four rollers, which are driven by planetary gears. In turn, the advanced control system allows, among others, the generation of a full programme from CAD files and an offline performance test. The offered DAVI MCA 4-roll plate bending machine is a guarantee of achieving repeatable parts of the highest quality. Technical specifications of the DAVI MCA 1513 plate rolling machine - number of rollers: 4 - maximum sheet metal thickness (mild steel, yield point 260 MPa): 6,5 mm - maximum sheet metal length: 1500 mm - control system: DAVI - motor power: 5.5 HP - power supply of the MCA 1513 machine: 4 ...
sheet width: 3100 mm plate thickness: 8,0 mm ST pre-bending: 6,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 6.020 kg. dimensions of the machine ca.: 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMW ...
sheet width: 1600 mm plate thickness: 15,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 210 mm diameter of lower rolls: 190 mm total power requirement: 7,5 kW weight of the machine ca.: 4225 kg. dimensions of the machine ca.: 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulM ...
Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed
Thread rolling machine ORT RP18 B 2-roll, overhauled, See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy, Power (Ton): 18, Number of rollers: 2
grinding diameter: 1000 mm grinding length: 8000 mm swing diameter: 1200 mm centre height: 600 mm max. workpiece weight between centres: 10000 kg workpiece weight max.: 20000 kg workpiece turning speeds: 5 - 60 U/min grinding slide speed stepless: 22 - 2240 mm/min rapid travel - grinding head longitudinal: 3500 mm/min turning speed range - grinding spindle: 450 - 1610 U/min grinding wheel size: 425 /710 x 63 x 305 mm tailstock adjustment: max. 6000 mm workpiece-drive: 20 kW grinding motor: 30 kW crowning with reference to bobbin radius: 0,01 - 1,5 mm total power requirement: 85 kW weight of the machine ca.: 35,4 t dimensions of the machine ca.: 13,1 x 3,3 x 2,35 m Roller grinding machine with movable grinding spindle carriage - Hollow and crown grinding device - Telescopic covers - Coolant system - Position tolerance 0.005 The data for this ad was created with ModulMWS - the software s ...
used
Web width: 520mm Voltage: 400V+IV+PE Current: 20A Control voltage: 24 V DC Air pressure: 6 bar
Dough dividing machine KÖNIG, type: Artisan SFC Compact machine for the production of square pastries with a high product variety thanks to interchangeable cutting rollers and punching tools. - Incl. 3 cutting rollers for longitudinal cutting - Incl. 2 cutting tools for the cross-section - Doughs up to a TA of 180 possible - Extremely gentle dough processing - Belt speed adjustment - Machine in stainless steel - Condition: Very good, ready to use - Everything technically checked and machine cleaned Capacity: up to 300 kg/h, at TA 180 Dough belt width: up to 170 mm Speed: max. 1.5m/min. EL. Connection: 3x 380-415 V, 50 Hz, 0.6 kW, 4.0 A Other punching tools are optionally available from KÖNIG: -Square -Heart - Crisp fresh -Quitting time -Rhombus The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrang ...
sheet width: 1070 mm plate thickness: 4 mm distance between columns: 1100 mm diameter of upper rolls: 110 mm total power requirement: 5,0 KW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,0 x 0,9 x 1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 9.0 / 10,0 mm distance between columns: 1070 mm diameter of upper rolls: 190 mm pre-bending capacity: 9,0 mm connected load: 5,3 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An Eberhardt bread roll line is available. Head machine: Primo-Star, depositor: Mono-Star, rounding unit: Vario-Star-S, production capacity: approx. 4000 rolls/h, product weight range: 20g-85g, line length: approx. 2750mm. An on-site inspection is possible.
Key data: 3000 mm, 8 mm
3-roll bending machine / round roller Schäfer SRMVHY – fully functional For sale is a used 3-roll bending machine (round roller / sheet metal bending machine) from the manufacturer Schäfer, model SRMVHY, built in 1992. The machine is in fully functional condition and is ready for immediate use. The rollers are hydraulically adjustable, which allows for precise and comfortable adjustment. The round bending machine is ideal for bending sheet metal in workshops and production plants. Technical data: Manufacturer: Schäfer Model No.: SRMVHY Year of Make: 1992 Max. sheet width: 3,000 mm Max. sheet thickness (mild steel): 8 mm Roller diameter: approx. 200 mm Voltage: 380 V Dimensions (L x W x H): approx. 5,300 x 1,800 x 1,300 mm Condition: used, fully functional Equipment: hydraulically adjustable rollers Changes and errors in the technical data, ...
plate thickness: 1,7 mm roll diameter: 50 mm Dimensions (L/W/H): 1600 x 600 x 1500 mm weight of the machine ca.: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
