printing press used for sale

Key data: 44 t, 1600 mm, 1530 mm

Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Pressing force: 44T Bending Length: 1600mm Spindles: 2x22T Control: TC15-2D Graphics Light barrier: Lazersafe IRIS+ angle measuring system Back gauge: 5 axis controlled X-R-Z1-Z2-Dx axles Bending tool holder: Type manual WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Double foot pedal for opening and closing the Y-axis 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; available immediately Viewing under power possible at any time by appointment!

Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: pa ...

Offer 26180 Technical data: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Installation height approx. 1000 mm - Projection to the middle of the ram 520 mm - Pusher clamping surface 350 x 350 mm - Plunger clamping pin 40 mm - Table size 1000 x 1150 mm - Table opening 150 x 780 mm - Table height above floor 720 mm - Drive 400 V / 8 kW - Space requirement approx. W 1150 x H 2900 x D 2150 mm - Weight approx. 4800 kg

Equipped with foot control. Auction-ID: A1-41281-322

equipped with extraction Auction-ID: A1-50707-126

motor power 3.0 kW, speed 1,450 rpm, maximum pressure 4 bar, including intake filter and silencer, completely mounted on frame, suitable for air transport and aeration applications, used, operation not tested. Auction-ID: A1-41281-274

Consisting of five 16mm cable press boxes, each box 500 pieces (tot 2500 pieces) And three metal boxes with cable presses of various sizes Auction-ID: A7-51362-48

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-436

Dimensions: 687 x 80 x 97 cm (L/W/H) Spare parts for paper production/spiral conveyors Auction-ID: A1-51285-435

Equipped with: hydraulic unit, control, foot control and several sets of press jaws. Auction-ID: A1-41281-257

equipped with filter; 12 Volts; mounted on wall board; Auction-ID: A1-50707-31

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...

pressure: 220 t chamfer lenght: 4175 mm distance between columns: 3760 mm column arm: 410 mm dayligth: 450 mm stroke: 180 mm ajustment speed: 100 mm/sec working feed: 8.0 mm/sec return speed: 75.0 mm/sec table width: 180 mm table height: 960 mm oil volume: 190 l 0: 295 bar controlled axis: 5 Anzahl Number of working hours: ca. 9.400 h total power requirement: 15.0 KW weight of the machine ca.: 16000 kg. range L-W-H: 4810 x 2200 x 2990 mm Very good / well-maintained condition () Only approx. 9.400 operating hours - Verified condition - Machine video - https://www.youtube.com/watch?v=nDcOAjUtNi0 Equipment: - CNC electro-hydraulic press brake - Equipped with AMADA OPERATEUR CNC control - 5 controlled axes (Y1+Y2/X1+X2/R) - Swiveling control panel (on the left) - CNC-controlled depth adjustment (Y-axis) - CNC-controlled backgauge adjustment (X-axis) - CNC-controlled vertical adjustment of  ...

Baler Bramidan Model HDX50 Type PEV Year of manufacture 2005 Electric drive 5.5 kW Pressing force 50 t Filling opening 1,090 x 610 mm Bale size 1,200 x 800 x 1,100 mm Stroke 1,210 mm Cycle duration avg. 22 s 4 lacing + lacing ribbon or steel wire Automatic bale ejection Dimensions: Length 1,965 mm x Width 1,365 mm x Height 2,540 mm Weight 2.5 t Sale against bid from location D - BL Thuringia Code No. Q53

For Sale: ORMA NPL-8-160 Hydraulic Hot Press – 160 Tons The machine is used, has undergone a technical inspection, is fully operational, and is ready for use. Before purchase, the machine can be started and thoroughly inspected at our company's premises. The main advantages of this machine include a maximum pressing force of 160 tons, the ability to operate using only the central hydraulic cylinders when gluing shorter workpieces, and an automatic pressure compensation system. The press is equipped with heating platens suitable for water, glycol, or oil heating, as well as a pressing time controller with automatic platen lowering at the end of the cycle. Technical Specifications: • Manufacturer: ORMA • Model: NPL-8-160 • Year of manufacture: 1991 • Platen dimensions: 3500 × 1300 mm • Maximum opening between platens: 480 mm • Flat, clean platens, free from  ...

hydraulic 4-fold book press, format per station 440 x 280 mm,

Brand: Kremer Type: KR-4510HW Working pressure: 110 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: tank for detergent Boiler: diesel-fired Heat Recovery: 42 kW Capacity: 600 liters per hour Connection: 230 volts Electric power: 3 kW Speed: 2800 rpm Weight: 100 kg Includes: high-pressure gun, high-pressure hose, brass coupling, 4 different spray nozzles and manual Condition: unused, in the original packaging Auction-ID: A3-46110-1318

DiBO JMB-S+ 250/15 T AK (GN) – Professional hot water pressure washer on trailer DiBO mobile professional pressure washer in near-new condition, with very few signs of use. Clean and particularly well-preserved machine. Designed for heavy-duty cleaning work, it has a maximum pressure of 250 bar with a flow rate of 15 l/min and a water temperature of up to 110 °C. Diesel heater with an output of 70 kW and a diesel engine of 12.5 kW. Equipment including: GreenBoiler System Reel with high-pressure hose Cleaning gun Electronic control panel with display Emergency stop Protective cover Maximum pressure: 250 bar Flow rate: 15 l/min Maximum temperature: 110 °C Heating: diesel, 70 kW Engine: diesel, 12.5 kW Power supply: 12 V The set is mounted on a 750 kg single-axle DiBO trailer from MMA, equipped with a jockey wheel and a coupling device. Professional machine close t ...

UMT AC770-19 | 19 Liter High Pressure Compressor is a professional, robust high pressure compressor with a capacity of 19 liters, designed for demanding applications in industry, workshop or garage. This compressor offers an excellent balance of power, capacity, and ease of use, making it ideal for applying pressure for paintwork, pneumatic tools, and cleaning operations. Capacity: 19 liter reservoir for continuous and stable pressure delivery. Construction: Strong, durable housing with high-quality materials for long-lasting use. Motor: Powerful motor that comes up to pressure quickly and is suitable for intensive use. Pressure level: Suitable for high-pressure applications, with a maximum working pressure that meets industry standards. Ease of use: Easy operation, with pressure control and safe pressure release valve. Mobility: Compact and portable design, ideal for use in a variety o ...

garage press Type: Pneumatic-hydraulic workshop press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Pneumatically assisted hydraulic pump (air + hand pump) Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge for precise force control Safety: pressure relief valve against overload Connection: 1/4\" compressed air connection (4–8 bar) Weight: approx. 100 kg Condition: Unused Auction-ID: A3-46110-1324

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-46110-1317

Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40333-149

12 pieces ring dies Paladin 2400 CAV for pelletizing mill Andritz type Paladin 2400-250/ 2R BM Perforation 16/22 mm Pockets milled out for special rolls Material X46Cr13 unused = new Price per unit net ex location 6,250,-- € + VAT Sale from BL Brandenburg Code Q17

Code: 0511 Brand: POR Model: JUNIOR - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard Technical data Briquette diameter mm 50 Max briquette length mm 60 Output kg/h 30/50 Motor Hp 7,5 Drum diameter mm 1000 Pump lt 40 Inspection door Overall dimensions mm 1680 x 1100 x 1500 h Weight kg 680

Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, directional control valve, valve, 4/3-way valve, control valve, check valve, pressure relief valve -Manufacturer: ARGO HYTOS, pressure relief valve unused -Type: MB06-VP 556-0331 -Pmax: 320 bar -Quantity: 10x valve available -Price: per piece -Dimensions: 100/45/H45 mm -Weight: 1.0 kg/pc.

Type: Hot water high-pressure cleaner Working data Water heating: Diesel-fired boiler Pressure adjustment: Yes Water temperature adjustment: Yes Chemical dosing: Adjustable Pressure gauge: Integrated Power supply: Electric Equipment Integrated detergent tank Integrated fuel tank for burner Transport wheels Push handle Control panel with temperature and detergent adjustment Remarks Used hot water high-pressure cleaner in non-tested condition. Machine shows normal signs of use, scratches and paint wear consistent with age. High-pressure hose, spray gun and lance are not included unless shown separately. Sold as shown in the photos. Approx. own mass: 130 kg Auction-ID: A1-50932-100

BIOSPACE - InBody BPBIO320 Sphygmomanometers - (2015-10) Good working condition and cosmetics Professional and fully automatic bench blood pressure monitor Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. An exhibition beforehand is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the price of the packing is integrated into the sale price. For shipping, you can have your transport pass or go through the carrier JMA express, or ask us for a shipping quote by F ...

Manufacturer: Kärcher Model: HDS 895 M Eco Category: Hot water high-pressure cleaner Type: Mobile pressure washer Technical data Power supply: Electric motor Heating system: Integrated diesel burner Pressure adjustment: Yes Water temperature adjustment: Yes Pressure gauge: Yes Integrated detergent tank: Yes Transport: Wheeled chassis with push handle Remarks Used machine in non-tested condition. Model identified from the control panel. Type plate not visible. Unit shows typical signs of use, scratches and paint wear. Burner, pump and control panel installed. Sold as shown in the photos. Auction-ID: A1-50932-97

Equipped with cutting device; Vredestein Flotation Pro tyres 560/50R22.5; Hydraulic pack pusher; Including control box Auction-ID: A1-47396-1014

Manufacturer: Brendon Power Washers Ltd. Model: BB1000 Category: Trailer-mounted pressure washer / Water bowser Type: Mobile pressure washer Water tank capacity: approx. 1,000 l Max. permissible weight: 1,500 kg Equipment Trailer: Single axle, tow hitch Water tank: Polyethylene tank Pump: High-pressure water pump Engine: Petrol engine (Honda type) Battery: Electric start system Parking support: Jockey wheel Remarks Used machine in normal working condition. Shows typical signs of use consistent with age and operating hours. Type plate partially unreadable. Water tank and pressure washer unit mounted on a road trailer. Approx. own mass: 700 kg Auction-ID: A1-50932-95

Manufacturer: Kärcher Model: HDS 895 S Category: Hot water high-pressure cleaner Type: Mobile pressure washer Technical data Power supply: Electric motor Heating system: Integrated diesel burner Pressure adjustment: Yes Water temperature adjustment: Yes Detergent dosing: Adjustable (0–4%) Pressure gauge: Missing Transport: Wheeled chassis with push handle Equipment Integrated water tank Integrated detergent tank Control panel with temperature and detergent adjustment Remarks Used machine in non-tested condition. Model identified from the control panel. Type plate not available. Pressure gauge is missing. Shows typical signs of use, scratches, dirt and paint wear. Sold as shown in the photos. Approx. own mass: 180 kg Auction-ID: A1-50932-98

Category: Industrial hot water high-pressure cleaner Type: Mobile high-pressure washer Equipment Configuration: Walk-behind unit Water heating: Diesel burner (hot water system) Pump: High-pressure pump Mobility: 4-wheel chassis with push handle Power supply: Electric motor Remarks Used machine in non-tested condition. Type plate missing/not available. Unit shows heavy signs of use, worn paintwork and surface corrosion. Front control panel and switches are missing. Side cover removed, internal electrical and hydraulic components visible. Sold as shown in the photos. Approx. own mass: 180 kg Auction-ID: A1-50932-96

Equipped with: braked trailer with license plate, side can open, start and run, for cleaning work Auction-ID: A1-47396-1706

Plate size: 800 x 800mm, Frame height: 800/100, Filter surface: 78m2, (after expansion: 86m2, Press capacity: 1006 l, (after expansion> 1107 l, Cake thickness: 30mm, Plate material: PPC/PPH, Maximum closing pressure: 385 bar, Equipped with double screw jack, Motor power: 2.2 KW, 1x Abel pressure pump, capacity: 8.4m3/h (2024)1x oil pump generator, various pumps, piping, Sick protection and floor grate construction. This lot will be delivered by appointment Auction-ID: A1-50763-3

DiBO IBH-S 130/10 hot water high-pressure cleaner – 130 bar – 600 l/h – 150 °C – working Professional DiBO IBH-S 130/10 mobile hot water high-pressure cleaner, equipped with 130 bar high-pressure pump and integrated 50 kW GreenBoiler hot water burner. Specifications: Brand: DiBO Type: IBH-S 130/10 Type number: 1.114.050 Serial Number: 2-1101/16 Type: Professional Hot Water Pressure Washer Supply voltage: 230 V / 50 Hz Electrical power: 3.10 kW Working pressure HD pump: 130 bar Water output: 10 l/min / 600 l/hr Maximum water temperature: 150 °C Burner power: 50 kW Noise level according to rating plate: 83 dB Manufacturer: DiBO N.V., Arendonk, Belgium Specifications according to rating plate Features: GreenBoiler hot water system Adjustable water temperature High pressure pump Integrated hot water burner Main switch and temperature control Stainle ...

Year: 2014 Manufacturer: KÄRCHER Model: HD 1050 B Serial No.: 011954 Power: 9.5 kW Flow rate: 13 l/min Operating pressure: 230 bar Max. pressure: 250 bar Max. temperature: 60 °C Weight (kg): 74 Equipment: Honda GX390 petrol engine, high-pressure pump with chemical dosing adjustment, high-pressure couplings, movable tubular chassis with wheels. Auction-ID: A1-51439-24

Features: Mobile chassis High-pressure hose with lance Adjustable temperature Adjustable pressure Detergent tank In working order. Auction-ID: A1-47451-851

Kärcher HDS 790 CI high-pressure cleaner, Specifications: Type: Kärcher HDS 790 CI Article number: 1.873-401.0 Year of manufacture according to type plate: 1994 Power supply: 400 V / 3~ / 50 Hz Connected load: 5.6 kW Working pressure: maximum 150 bar Permissible pressure: maximum 200 bar Water output: approx. 11.6–13.0 l/min Maximum water temperature: approx. 155 °C Working temperature: adjustable up to a maximum of approx. 90 °C Burner power: maximum approx. 53 kW Fuel consumption: approx. 5 l/hour Fuel tank: approx. 30 litres Detergent tank: approx. 10 litres Dimensions: approx. 1,030 × 600 × 730 mm Weight: approx. 100 kg Features: High-pressure cleaning system with heated water Diesel-fired burner Integrated fuel tank Integrated detergent tank Adjustable working temperature Auction-ID: A1-47396-1152

For DÜRR DETNAL VS 900 S and VS 1200 S suction unit, without roller table Auction-ID: A7-51473-71

Designed for up to 3 large cuvettes, recommended maximum capacity 9500 kg, maximum output 15200 kg, max. piston stroke 25 mm, column spacing 140 mm, diameter work table 130 mm, without roller board Auction-ID: A7-51473-44

: neu : ca. 10 Wochen ab Auftrags : Türkei : 61300 € : 1158.57 € : 100 to : 2550 mm : 4 (Y1, Y2, X, R) : 265 mm : 2200 mm : 450 mm : 530 mm : hydraulisch : 180 mm/s : 10 mm/s : 120 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 100 l : 11 kW : 3800 mm : 1670 mm : 2850 mm : 7800 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correctio ...

• Fully automatic horizontal channel baler • Automatic wire tying system • Schneider Magelis touchscreen operator panel • Separate motor control cabinet with emergency stop, door interlocks and hours meter • Lockout station fitted for safe maintenance • Enclosed hydraulic power pack • Operational – may require some minor repairs. Sold as seen • Already removed – loading provided at our Wymeswold site, Leicestershire. Buyer arranges haulage A heavy-duty Dutch-built Bollegraaf HBC 110 channel baler, suited to high-volume baling of cardboard, paper, film and other recyclables. Bollegraaf is one of the best-known names in recycling balers, and the HBC range is built for continuous production use. The machine has been removed and is ready to load. Viewing is welcome before purchase. We run balers, granulators and shredders on our own site at Wymeswold, near ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 90300 € : 1706.67 € : 175 to : 4050 mm : 4 (Y1, Y2, X, R) : 265 mm : 3600 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 18.5 kW : 5250 mm : 1700 mm : 2850 mm : 12780 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correc ...

• 170 tonne closing power • Channel 1,150 × 1,100 mm • 2 × 55 kW pump motors (110 kW total), 415 V / 50 Hz • 3,000 litre hydraulic tank (ISO 46 oil) • Automatic wire tying • Serial no. 2399/1 • Infeed conveyor included – pit-fed steel slat conveyor with overhead feed section to the hopper • Bale discharge tray • Originally installed by RCP Recycling Systems, Telford • CE marked • Already removed and ready for loading at our Wymeswold site, Leicestershire A 1999 Macpresse MAC 111 automatic channel baler, sold with its infeed conveyor. The MAC 111 is a heavy-duty Italian-built baler for high-volume baling of cardboard (OCC), mixed paper, plastics and other recyclables, with a large 1,150 × 1,100 mm channel and twin 55 kW pump motors. The baler and conveyor have already been taken out, so there is no dismantling for the buyer to arrange. Photos were t ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 84200 € : 1591.38 € : 220 to : 3050 mm : 4 (Y1, Y2, X, R) : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 140 mm/s : 10 mm/s : 140 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 4250 mm : 1770 mm : 3000 mm : 12600 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correcti ...

Professional mobile pressure sandblasting/blasting system supplied by Reno-Tech.cz, incorporating a Komnino KO-40-10 pressure vessel. Suitable for abrasive blasting and surface preparation applications. Auction-ID: A1-51282-14

Floor-standing hydraulic shop press with a rated pressing capacity of 20 tons, suitable for general workshop applications such as pressing bearings, bushes, shafts and other mechanical components. Specifications / features: Rated capacity: 20 ton Manual hydraulic operation Hydraulic pressure gauge Adjustable-height press bed Heavy-duty steel H-frame construction Movable/adjustable working table Hydraulic ram/cylinder Various press plates / tooling visible on the working table CE marked Auction-ID: A1-51282-131

: neu : ca. 10 Wochen ab Auftrags : Türkei : 106400 € : 2010.96 € : 320 to : 3050 mm : 4 (Y1, Y2, X, R) : 365 mm : 2600 mm : 450 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 650 mm : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 154 mm : 250 l : 37 kW : 4300 mm : 1820 mm : 3330 mm : 17100 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correct ...

Pressure reducing pressure gauge 240 bar and 12 bar for neutral gas Auction-ID: A1-51535-439

Pressure reducing pressure gauge 200 bar and 4 bar for neutral gas Auction-ID: A1-51535-437