printing machine used for sale

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 11 tool stations for tools and clamps ? Drives: Maintenance-free, digital three-phase servo motors ? Punching head: Hydraulic system with closed control loop, single tool adapter, 360? rotation of all tools ? Automatic repositioning device with programmable presser foot ? Vacuum slug removal ? Swarf bucket ? Brush tables ? Parts chute 200 x 200 mm and sorting of parts into 2 containers ? 2 parts containers ? Controller BOSCH Type 3, activity-oriented user interface, Online help, diagnostic functions, 3.5 disk drive, BNC/RJ45 connection, TFT color screen 10.4 ? Graphic programming ToPs 2000 ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? MultitShear ? MultiBend ? SoftPunch ? Table extension ? Start post

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Silca key cutting machine type rekord, see photos

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

The pick-up station attached to the rear slot table, including the clamped cutter head, is not part of the offer

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...

Pipe bender - Power 3/8" to 2" pipe - Tools for 3/8" - Incl. base frame see pictures

Machine number: 2820-0492 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 19 A Control: DECKEL CONTUR 3 Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed: 2 - 3600 mm/min Rapid traverse: up to 4 m/min Tool holder: SK 40 Table dimensions: 700 x 460 mm with 7 grooves incl. vice, jaw width: 110 mm Reference: Hüpometall - Lot 22

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor ? Enclosed beam delivery system ? One cutting head strategy ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 6000 with optimized stand-by mode ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with condition checking ? ControlLine: Height regulation and sheet edge sensing Control ? SIEMENS Sinumerik 840D ? Technology data is integrated ? Colour screen ? Automatic shu ...

Standard Configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Chiller ? Automatic pallet changer lengthwise installation ? Longitudinal conveyor ? 17 touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 including NitroLine, with optimized Standby Modus ? beam tube purge with nitrogen ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser ? Laser cutting head ? One cutting head strategy ? LensLine with status check ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) ? ControlLine: Height regulation and sheet edge detection Contr ...

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

Forte BA 321 Automatic Band Saw - With hydraulic clamping and feeding device - Cutting range around 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw blade - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Jaw width: 125 mm Reference: Wittner - Lot 34

drilling capacity: 35 mm; drilling depth: 210 mm; speed to N =: 830 rpm; adhesion: 16000 N; power: 1600 kW; connection: 230 V; description: equipped with automatic cooling system; unused; 5637;

Standard Configuration Machine ? Closed machine frame ? Integrated cabinet ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Chiller ? Automatic pallet changer lengthwise installation ? Enclosed beam delivery via laser light cable ? Integrated electrical cabinets with inside light ? Wide longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning TRUMPF laser ? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output ? Stimulation via pump diodes ? Laser power control Cutting head ? Universal cutting unit ? One cutting head strategy ? Protection glass to avoid lens contamination ? Online protection glass monitoring ? ControlLine Control ? Easy shop floor programming ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 with optimized standby ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? LensLine ? ControlLine: Height regulation and sheet edge detection  ...

Electrode welding machine Inverter technical data see pictures Condition: never used / new (5)

Year of manufacture approx. 1980, wheel diameter: 406mm, wheel width 420mm, module min.-max.: 0.5-+4.3, milling cutter speeds 49-246 rpm

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 6000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens (for TLF 6000) ? Cutting head quick-change device ? Positioning laser diode ? Automatic focus setting AutoLas Plus ? Laser power control ? Oil spray ...

max. material thickness 6 mm; max. working width 1000 mm; Mobile

Profile bending machine with: - Foot pedal right/counterclockwise rotation - 1 set of standard rollers - All 2 rollers are driven - Working horizontally or vertically Round material solid 35 (800) mm Square material solid 35 (1200) mm Angle steel 50 x 50 x5 (850) mm Flat steel 60 x 10 (800) mm Axle diameter 50 mm Working speed 4.5 m/min Roller diameter - tools 155 mm Total power requirement 1.5 kW Machine weight approx. 0.9 kg Space requirement approx. 0.6 x 0.9 x 1.35 m

Hermle UWF 900 Year of manufacture according to the wiring diagram: 1992 Control: Heidenhain 407 Facilities Handwheel Network connection Speed: 4,000 rpm Technical data X-travel: 600 mm Y-travel: 400 mm Z-travel: 420 mm Tool holder: SK 40 Distance spindle / table: 127 - 567 mm Spindle diameter in front bearing: 55 mm

Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 5000 with optimized standby, purged with nitrogen and LensLine ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? ControlLine: Height regulation and ...

Machine including Liftmaster.

For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx.  ...

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating  ...

Serial number: 24952 Travels: X: approx. 300 mm Y: approx. 450 mm Z: approx. 150 mm with STEPCRAFT MM1000 milling unit, year of manufacture 2019 Reference: Wittner - Lot 64

Jaw width: 160 mm Reference: Osthoff - Lot 39

Cutting machine for rolls Wabäma complet in chrome steel Horizontal cutting machine Max cutting compound: Width: 135 mm Height: 50 mm with infeed and discharge conveyor New: Teflonized knife, conveyor belt Pressure belt and conveyor belt Mass: Length: 1900 mm Inlet height: 1000 mm Depth: 700 mm Connection: 380 V Condition: very good, Repaired

Machine number: 24755 Drilling depth: up to 180 mm Speed: from 25 to 3000 rpm Table dimensions: 400 x 300 mm with two grooves Training workshop part 2 - Lot 6

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Table dimensions: 630 x 150 mm incl. clamped vice, jaw width: approx. 110 mm

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

WEINIG moulder model UNIMAT 17A with 8 shafts: -useful working measures 170x120mm -gimbal towing and pneumatic pressure -variable feed speed from 6.3 to 36.5 mt/min -Double wheel of upper feed before the 1st shaft -tandem feed groups in front of the 2nd and 4th shaft -fluted plane from 1st to 6th shaft -2000mm long entrance plane -manual lubrication pump of the table Tree layout: 1-under 2-right 3-left 4-right 5-above 6-under 7-above (free space below)    8-Universal

Machine number: 920601 Operating voltage: 380 V Frequency: 50 Hz Connected load: 43 kVA Nominal primary voltage: 380 V Open circuit voltage: from 2.3 to 4.1 V Operating current: 2.6 kA Throat: approx. 300 mm This is an article from a training workshop Reference: Training workshop - Lot 30

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0.80 - 1.2 mm Weld plate thickness: 0.5 - 12 mm Accessories: Gas-protected welding gun (5 mm) European plug (50 mm²) Earth terminal (2 m) 36 V gas control Features: IGBT MAG / MIG, MMA & Lift TIG Dual pulse function VRD 2T/4T function 4-drive feeder 5-language support 18 sets Packed in 2 boxes: 730x420x900 and 550x330x400

manf. 2009 / CE Label optical & technical very good conditions! more details on request exw Germany

Stapling machine nail Multinak S

First commissioned: 2006 Control: Fidia C20 incl. handwheel X-axis: approx. 7,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,751 mm A-axis: + 125° / - 95° C-axis: ± 275° Clamping table Clamping surface: approx. 6,000 x 2,000 x 400 mm Head Spindle power: 20 kW Spindle speed: max. 20,000 min-1 Tool holder: HSK 63A Tool tensioning: hydraulic Drives Linear axes Feed speed X-, Y-, Z-axis: 65 m/min Axle acceleration X-, Y-, Z-axis: 5 m/s2 Connection data Connected load: approx. 150 KW Dimensions, weights Space required Machine with protective cabin Dimensions: approx. 12,200 x 6,300 x 5,800 mm Total weight: approx. 105,000 kg Auxiliary - 20-fold tool changer - Engine room surveillance (camera) Options at extra cost: - Renishaw RMP60 probe - Fidia HMS System Condition of the machine Fully functional, very good condition