128,883 used machines on RESALE, but how to find them? Machine Search
; Gross weight [kg]: 6934; Engine: Caterpillar C18; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 1307
Table crosscut saw Irion UKS 800 DS Masch. No. 1360 Stop left 7 m Stop right 3.5 m Feeder Roller conveyor 400 mm wide Roll 300 mm long with programming control with documentation with data storage L x W x H Machine: 1650 x 1650 x 1750 mm Built in 1994 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...
DETROIT DIESEL 8V 71 TI 380 HP - 2100 RPM Listing ID 20093 Make DETROIT Model 8V 71 TI - 24V STARTER - Serial No. Cylinders 8 V / Inline V Power 380 HP RPM 2100 RPM General Info Condition: Runner Application: Marine Weight (kg): 1300 KG Cooling : Water Cooled WITH EXPANSION TANK Dimension 150 x 120 x 140
Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.
Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...
Process cooling tower, air-cooled, Type: Cooling tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD are compact water cooling towers that are suitable for outdoor installation. Including pump, water treatment for biocide and stabilizer and control and control cabinet. Cooling capacity kW 1113 Cold water temp. Exit/ Entry °C: 27 / 32 Volume flow m³/h: 192 Available Pump Pressure Bar: 3.27 Wet bulb temperature °C: 21, Air volume m³/h: 97200 Sound pressure in 10m free field dB(A): 64 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. current consumption (A) 125 Max. power consumption (kW) 86.6 Dimensions: Length mm 6600, width mm 2424, height mm 3180, Weight transport / operation kg: 4194 / 8449 Connection DN 150 FROM 9038 Year of construction 2020 Condition: Optical 1, Technical OK Test facility, as good as new Price: on reque ...
5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...
Electron microscope Brand: Jeol Microprobe Type JXA-8900RC Built in 1996 (S/N XM120052-170) All documents and measurement protocols are available. Many accessories Not checked for functionality Sold only to commercial enterprises! All information without guarantee
Coffee grinder with extra rollers for a particularly fine grinding degree Power 500-1,500 kg coffee / hour (depending on grinding degree)
used
2. Qty. 1 Second-hand labeller Mfc.: Krones Type: Universella 723-844 Built: 1991 10 labelling stations Number of labels: 4 labels per bottle Capacity: 12 000 Btl./h Size of bottles: 0.5, 0.7, 0.75 & 1.0 Ltr. 2 glue stations
Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Cutting capacity: height x width mm 380 x 750 Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensio ...
New machine 24-month warranty Benefits: + Solid construction + Boiler, central rod and spiral made of stainless steel + Drive with two motors (spiral & boiler) + Flour dust hood closes gently with dampers, with auto shut-off + mobile machine, on swivel wheels, with fixed boiler + Dirt protection cladding for adjustable feet + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast spare parts supply within 1-2 business days Technical data: - Flour capacity: 4 - 50 kg - Dough capacity: 6 - 80 kg - Boiler volume: approx. 130 litres - Boiler outer edge: 720 mm - Engine power: 4.75 kW (kneading spiral & boiler drive) - rpm at 50Hz (1st / 2nd gear): 125 / 250 - Connection values: 400V - 3Ph - 50Hz - 32A CEE plug - Dimensions in cm: 75 x 123 x 132 (WxDxH) - Heig ...
used
Folding machine MBO T 800.1 6-6-4, year of construction 2005, pallet feeder, navigator control, 1. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 1 window rebate pocket for 1st or 2nd plant, gluing device HHS prepared, 2. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 3. 56/4 RFE folding unit, 4 pockets, sheet recirculation, noise insulation device, compressor, Blobreukrrks Sb Nwkeh 4. MBO SBAP 72 ME, mobile standing arch delivery, year of construction 2005, press rollers at call If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks
Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4
MAK 8M552AK Crankshaft for Sale MARKING 1.74 .6 -25.10.01-50B 101373 221361 CK 45/50 DB 7295 DB LLOYDS DSF 601 966 15.10.76 7295 LLOYDS 62300 D 10 GTL .76 7295 A B ES 73826 10.76
Demoor 825-320 oil country lathe. Distance between centers: 3000mm. Swing: 970mm. Swing in carriage: 700mm. Bore: 320mm. New electrical box. Carriage with cone copier. Equipped with chuck.
2x RFID Tunnel, Sick, ideal for recording content and quantity, e.g. in cartons - used - Price per piece ex location (net): 19.950.-€! Manufacturer: Sick Year of Make: 2022 Model No.: MSC800-1100 Type: TTS040-B6M00X000MXX0FK00 P/N: 1 040 385 S/N: 2230 3260, second serial number to be entered Tunnel width: outside approx. 1.10m Tunnel length: approx. 1.37m Belt Conveyors: Strap width: approx. 45cm Max. object width: 400mm Max. belt speed: 1m/s Element width: approx. 50cm Element length: approx. 3.50m Former new price 40.000.-€ / piece Condition: good Available: immediately Location: Unna Gain insight into boxes and check contents and quantity without having to break open packages. Since verifying the shipment is crucial to ensure customer satisfaction, ensure that your customer receives exactly what they ordered with an RFID tunnel system. This system ens ...
Pleiger Hydromotor for Krauss Maffei MO 8000
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 100cm Width: 185cm Height: 160cm Electric power: 2.2kW Delivery time: After the payment, from the stock
MAKE:MACGREGOR HAGGLUNDS ART NO:388 3127-801 SERIAL NO:1994480667 SUPPLIER:100658 DATE:9450
Transport chain for scraper belt conveyors 450 K-3, 8,80m lang, Knoll, new -70% We have set a very low price! If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - For scraper belt conveyor Fa. Knoll 450 K-3 - The chain has 140 links and is therefore approx. 8.8m long - Chain link length 63mm, - Roll diameter 40 mm, - Clear width between the chains approx. 345mm - appr. 350 kg
Merli Clovis 70 heavy lathe. Distance between centers: 8000mm. Swing: 1650mm. Swing in carriage: 1170mm. Bore: 206mm. Bed width: 1000mm. Speeds: 16.(3-300). Maximun weight without steady rest: 15.000Kgs. Maximun weight with 1 steady rest: 20.000Kgs. Equipped with chuck of 1400mm. Equipped with DRO. Equipped with 2 steady rest. Equipped with CE protections and CE certificate for second hand machines.
ESTA SLDG 800, used refrigerator Used refrigerator with sliding glass doors Esta refrigerator SLDG 800 – the ideal solution for efficient cooling. With a capacity of 776 litres, space-saving sliding doors and adjustable grates, it offers maximum use of space. Tropicalized unit and convection cooling system guarantee reliable performance at +3°C to +7°C. • External dimensions (H x W x D): 204 x 114 x 63 cm • Interior dimensions (H x W x D): 114 x 105 x 50 cm • Usable volume approx. 756 litres • 6 adjustable shelves • Convection cooling • Internal temperature control range: +3 to +7° C • Interior: sheet steel • Outer material: sheet steel • Refrigerant: R134a • Plug-in ready (220-240 V/50 Hz, 5.5 A) • Door made of thermoglass •Indoor We would like to point out that with regard to the Product Safety Regulation, the product offered here is int ...
TO WHOM IT MAY CONCERN ; WE VE USED 2 PCS WOODWARD 828 DIGITAL CONTROL MODULES AT OUR STOCK. WE DISMANTLED FROM RUNNING ENGINE SYSTEM . PLS FIND DETAILS OF 828 DIGITAL MODULES ON BELOW PART NO 9907 - 247 REV NEW SERIAL NO 12197885 PART NO 9907 - 247 REV G SERIAL NO 16033485 PLS REFER SOME PHOTOS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
DATA ON THE MACHINE Machine type: Roller curve conveyor / 90 degrees Manufacturer: Transnorm Model: 816-500 Built: 2007 Condition: very good (used) Price 1,200 Euro net plus VAT Location Warstein , Germany Reference M-TRA-0221 Description We offer you a used roller conveyor from the manufacturer Transnorm, incl. feet. For more data, see typeplate. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are reserved!
Product number: 1940P Type: AGOL-850 Order number: ON17163 Year of construction: 2015 Capacity: max 800 pigs/hr. Products: pork carcasses, left & right Slaughtered weight: 70 - 120 kg Air pressure: 6 - 8 Bar, 285 Nl/min. Power: 3 x 400V, 50Hz, 45kW Dimensions: 10000 x 5150 x 2300 mm NEW in box, never used
Machine details Bearing number 1105-03191 Machine type flat grinding machine Make sit Type RP 800 Built in 1991 Control type NC Warehouse LAGER Country of origin Germany Delivery time immediately Freight base from the exhibition hall, free Technical details Grinding length 800 mm Grinding width 400 mm Workpiece height 475 mm Table length 1100 mm Table width 500 mm max. workpiece weight 700 kg Auto. Cross feed adjustable 3-50 mm/stroke Vertical delivery, 1 tick mark 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore diameter 76.2 mm Connection voltage 380 V Grinding spindle motor 3.7 / 4.5 kW Total power requirement 4.5 kW Machine weight approx. 4.5 t Room requirement approx. 3500x2000x2700 mm Information Automatic delivery, - Electro-magnetic clamping plate with straight fine pole division, dimensions 800x400mm ...
Mikron VCP 800 2007 Built in 2007 Control Heidenhain iTNC 530 Travel X-800mm , Y-650mm , Z-500mm Working spindle: Spindle speed max. 12000rpm. Tool magazine: Number of tool slots 36 Machine table: Clamping area 800 x 650mm Accessories: Inner coolant supply - Belt filter system 20Bar Conveyor
release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated
ID3599 Aquachem Automatic filter machine / Filterautomat AF 800 year/Baujahr 2020 Automatic filter machine, Filter volume: 154 dm3, filter area: 9.9 m2, filter plate format: 800 x 800 mm, number of chambers: 10, cake thickness: 32 mm, plate type: sealed chamber and membrane plates, feeding: up to 8 bar via the external inlet at the top, membrane repressing: pneumatic repressing system with internal air distribution and ramp-controlled pressure build-up (max. 15 bar), cake emptying system: AIRDIS cake emptying system and vibrating cylinder integrated in the filter plate handle, press locking: automatic, self-regulating electric/pneumatic/hydraulic locking system, drive: 0.75 kW, 400 V, 50 Hz, with control system, with connection and drain distributor, feeding unit (peristaltic pump), rinsing station, only in use for 1 year Automatic filter, filter volume: 154 dm3, filter area: 9.9 m2, ...
Control: Siemens 840D Country of origin: Germany Spindle speed n-1: 12,000 Spindle motor kW: 9 Z - Path mm: 510 Y - Path mm: 510 X - Path mm: 835 Speed m/min: 30 Tool holder: HSK 40 Table load: 800 kg Clamping area mm: 1,000 x 560 Machine footprint mm: 2,100 x 2,700 Machine weight approx. kg: 4,200
1 BARUDAN double head embroidery machine type BEAT-802T-YS, 2 heads, 7 needles each head, with driver unit SDV-I, BARUDAN SMT keyboard
Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.
Power 800-1,500 kg coffee / hour (depending on grinding degree) For further photos, information or viewing appointments, please contact us by phone or in writing.
Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/
MASSON RCD 800 (W8000) 1216 kW /1600 rpm SN 22123 Ratio 3.538:1 1216 kW 1600 RPM Used in excellent condition Available Mechanical Controls Weight (kg) 1800 Dimensions (cm) 125 X 115 X 140
Key data: 812 KW, 400 V
Complete 812kW containerised CHP Himonsia / Siemens HGS-810 T5 LPG generating set Make and model: Himonsia / Siemens HGS-810 T5 LPG Scope of supply: 40ft Container (67dBA1m), Engine (Siemens), Alternator (Stamford), Control Panel (Comap Controller), Remote Radiator and Heat Exchanger. The Engine is currently being rebuilt with 4 x heads already replaced and the following spares available with the unit: 7-cylinder head gasket kits 1-cylinder head 1- exhaust manifold section 1-water temperature sensor Maximum service cost estimated at £30,000. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.
Clamping cube clamping table Clamping angle Clamping tower machine table used Clamping surfaces: 2 times approx. 825 x 600 mm 1 time approx. 825 x 455 mm 1 time approx. 600 x 455 mm Long hole bore: approx. 70 x 30 mm Plate thickness approx. 30 mm Dimensions total: approx. 825 x 455 x 600 mm Weight approx. 400 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimension: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm The scope of delivery includes: 02x Workbench stand, used Material colour: sendzimir galvanised Stand height: 900 mm Stand depth: 800 mm Stand profile: 100 x 100 x 3.00 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100/50/15 Clear width: 1,140 mm 08x Safety pins, used Design: completely galvanized 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,350 mm Particleboard depth: 820 mm Particleboard one-piece 01x Particleboard, used Particleboard thickness: 38 mm Particleboard width: 1,120 mm Partic ...
maximum number of results exceeded
please refine your search
