137,360 used machines on RESALE, but how to find them? Machine Search
Auction-ID: A1-40330-106
Includes charger. Auction-ID: A1-47423-113
Plot has been tested for operation Auction-ID: A1-40164-126
135 mm working width. Auction-ID: A1-47368-3504
Plot has been tested for operation Auction-ID: A1-40164-41
Including pallet Auction-ID: A1-51269-58
Including gray and orange and signed ECA Auction-ID: A1-49565-132
Including pallet Auction-ID: A1-51269-59
Including pallet Auction-ID: A1-51269-61
Including pallet Auction-ID: A1-51269-60
Equipped with air pressure gun. Reel of 16m. Auction-ID: A1-49565-46
USED VERTICAL MIXER, 24 m3 capacity, total height approx 5.400 mm including transmission group + cyclon, max Ø 2.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter,, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, electric voltage: 400 V, 50 Hz,, conditions: good working conditions, availability: immediate, width: 2800 mm. special transport
Universal lathe, little used Model: SN 710S x 1500 Make TRENS SK Accessories: Digital Display 4 Jaws Face Plate Coolant tank
Lathe SARO SP 1250x3000, working condition
Machine Stanko 166, 6.3 meter DBC. Completely overhauled in 2024. Electric tailstock. Cable guides installed. Machine in like-new condition. Manual available. Dismantling and loading are included in the price. All headstock components are the same as on the DIP 500. An operator who already operates the DIP 500 can easily operate the 166 DIP 600 without retraining. The machine comes complete with two lunettes, a Ø 300-600 and a new Ø600-1050. Work piece maximum diameter: – above bed: 1250mm – above support: 900mm Work piece maximum length: 6300 mm Spindle speed(rpm): 5…214 Max workpiece weight: 10000 kg Motor power: 30 Kw Machine overall dimensions: – length: 10100mm – width: 2320mm – height: 2000mm Machine weight: 25000kg
Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 3.5-6 kW -Speed: 930-875 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 610/270/H340 mm -Weight: 91 kg
Gear motor, electric motor, three-phase motor -Manufacturer gearbox Lenze type: GST04-1MVBR071-31 -Manufacturer motor Lenze type: MDXMA42M071-31 -Power: 0.25 kW -Speed: 825 rpm -Shaft: Ø 20 mm -Construction: B3 -Protection class: IP 55 -Brake -Number: 3x motors available -Price: per piece -Dimensions: 430/205/H150 mm -Weight: 14.3 kg
Roller conveyor, conveyor belt, roller conveyor, packaging system, turning table, turning roller conveyor, roller conveyor -with folding device for laying or setting up goods -Folding drive: pneumatic -Roll width: 800 mm -Conveyor length: 3150 mm -Roll diameter: 60 mm -Axle distance: 100 mm -Height: mm -driven: via belt -Gear motor: 0.37 kW 60 rpm -Speed: 6 m/min -Dimensions: 3150/1300/H540 mm -Weight: 386 kg
Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: Lifting cylinder BVS 779 CX 25A-150 -Stroke: 150 mm -Piston: Ø 48 mm -Pressure: max. 800 bar -Number: 44x cylinders available -Price: piece -Dimensions: Ø 85 x 235 mm -Weight: 6.7 kg/pc.
Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump hand pump, two-stage -Type: P2508 -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2.5 L -Quantity: 6x hand pump available -Price per piece -Dimension: 600/145 / H180 mm -Weight: 14 kg/pc.
Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high-pressure pump, high-pressure hand pump, hydraulic hand pump -Manufacturer: Bahco, hydraulic hand pump, two-stage -Type: P1008 -Pressure range: up to 80 MPa / 800 bar -Oil volume: 1 L -Number: 12 hand hydraulic pumps available -Price: per piece -Dimensions: 600/120/H190 mm -Weight: 11.3 kg/pc.
fan, ventilator, electric motor, blower, emergency ventilation fan, smoke gas fan, axial fan, axial ventilator, axial fan, suction fan, axial high-performance fan -Manufacturer: Güntner, axial fan, axial fan, suction fan -Power: 2.79/1.36 kW 890/700 rpm -Fan: Ø 1000 mm -Quantity: 1 piece available -Dimensions: Ø 1000 x 330 mm -Weight: 56 kg/piece
Parallel Lathe PBR type TM-30 Between points: 3000 mm Maxi Ø on bench: 620 mm Maxi Ø over saddle: 400 mm Maxi diameter in brocken bed: 860 mm Spindle diameter: Ø 105 mm Spindle speed: from 15 to 1500 RPM 3-jaws chuck Ø 315 mm Year of construction: 1987 Motor: 15 CV Threadings: Metric + Whitworth Tailstock CM5 Scale 2 axes Equipped with: one 3-points fixed steady Rapid Feed non-functional Voltage: 380 V Dimensions (L x W x H): 4900 x 1500 x 1700 mm Weight: 4,5 T
Intensive batch mixer with a usable filling per batch of 500 l. / 800 kg (max.), emptying via central bottom flap (hydraulically operated), tools: star whirler, mixing star with two blades and wall-to-bottom scraper. Agitator drive: 45.0 kW via V-belt (speed can be controlled via FU), drum and mixing star drive: 13.5 kW, hydraulic unit: 2.2 kW for lock actuation. Includes modern control cabinet with programmable control. Mixer completely overhauled in 2016. Available for an extra charge: Comfortable mixer platform / steel substructure incl. drawings and statics.
Spiral mixer KEMPER, type: SPL 50 -in very good condition- - Kettle for 80kg dough or 50kg flour - Center rod for smaller amounts of dough - With new long connection cable and reversible plug - a time clock - Forward and reverse gear with 2 speeds each - Machine stop when the lid is opened - Stainless steel spiral and boiler - Stainless steel dust cover - Bearings, V-belts and electrics have been checked The kneader is in very good condition and is ready for immediate use. The machine has been technically tested. Visits and test runs are possible by arrangement.
Parallel Lathe SCULFORT type MAXICAP 315-3000 R Between points: 3000 mm Maxi Ø on bench: Ø 635 mm Maxi Ø over saddle: Ø 470 mm Maxi diameter in brocken bed: Ø 1000 mm x Width 200 mm Spindle motor: 13 CV Spindle diameter: Ø 71 mm Rotation: from 20 to 1300 RPM Square turret GOODSHAPE 3-jaws chuck Ø 380 mm Threadings: Metric + Whitworth Tailstock: CM5 Feeds: longitudinal + transversal auto advances Equipped with: 1 lubricant pump + 1 face plate Ø 1000 mm Equipped with: 2 fixed steadies: Ø 380 mm + Ø 1000 mm Voltage: 380 V Dimensions (L x W x H): 5200 x 1600 x 1700 mm Weight: approx 5 T
We offer a refurbished Dokadek - 412.83m² with 65% discount - partially refurbished Doka rental warehouse quality The frames are cleaned, corrosion sealed and coated with zinc phosphate All elements are covered with original Doka Xlife formlining and partly newly covered New value approx. 274,093.90€ Special net price: 95.932,87€ pcs. Description 17 Dokadek element 1.22 x 2.44m 164 Dokadek element 0.81 x 2.44m 23 Dokadek element 1.22 x 1.22m 4 Dokadek element 0.81 x 1.22m 250 Dokadek support head 42 Dokadek 2.44m 21mm 2 Dokadek balancing beams 1.22m 21mm 46 Dokadek Differential Carrier 0.81m 21mm 149 Dokadek suspension bracket H20 30 Dokadek Wall Brackets 100 Dokadek Wall Head 10 Dokadek Corner Head 2 Dokadek mounting rod B 28 Dokadek panel pallet 0.81 x 2.44m 5 Dokadek panel pallet 1.22 x 2.44m 7 Doka reusable containers 1.20x0.80m 2 Dokadek range of c ...
Spindle support for SUI 80 longitudinal direction
Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...
Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 8000 working direction: rotating turret Working type: fullautomatic amount of capping heads: 8 electrical power supply kW: 5
WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition
Counting scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale -Handover: in its current condition as inspected -Scale: without control and terminal -Manufacturer: Tedea-Huntleigh, Heavy-duty scale, floor scale, pallet scale -Type: 3410 -Weighing range: up to max. 8000 kg -Load cell: 4x Tedea-Huntleigh 2000 kg -Quantity: 3 pieces available -Price: per piece -Dimensions: 2500/1250/H130 mm -Empty weight: 472 kg/unit
Used NEGRI BOSSI 850T injection molding machine - Year 2004Technical Specifications & Performance DataThis NEGRIBOSSI U850 Injection Molding Machine delivers high-tonnage performance for large-shot applications and precision molding. Configured with a 100 mm screw, it offers robust shot volume and clamping power, making it suitable for industrial packaging components and beverage production accessories. Manufactured in 2004, the machine integrates proven NEGRIBOSSI engineering with an EUROMAP 8500H-6500 injection unit and a user-friendly HMI.Model: U850 (EUROMAP 8500H-6500)Clamping force: 8500 kNScrew diameter: 100 mmShot volume: 3925 cm3Shot weight (PS): 3570 gMaximum shot weight: 3750 gInjection pressure: 1670 barBetween tie-bars (H x L): 1140 x 1020 mmPlaten size (H x L): 1670 x 1580 mmMould height (min–max): 400–1100 mmOpening stroke: 1200 mmEjector stroke: 399 mmHydraulic operat ...
maximum number of results exceeded
please refine your search
2.500 € 
