136,476 used machines on RESALE, but how to find them? Machine Search
Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14"–26" Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24" printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening The Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and p ...
used
Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...
Reference Num.: 4378 Brand: Ryobi Type: 3302 HA Construction year: 1999 Impressions: 40 mio Size: 340 x 450 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 340 x 450 mm Printing speed: max 10,000 sheets/hour Printing units: 2
used
Reference Num.: 4424 Brand: Ryobi Type: 522HXX Construction year: 1999 Size: 520 x 375 mm Available: directly Status: Not in production Location: Deutschland Sheet size: min 100 x 150 mm, max 520 x 375 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 16.93 mm Machine size: Length: 2,700 mm, Width: 2,225 mm, Height: 1,705 mm Total weight: kg 3,400 / lbs 7,496 Power: KW 18 / hp 18
impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Crestline The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Approximately 38 different roles. Including EMBLEM, Maegis, AGFA, Polytape, ORAFOL, CANON, OCÉ, including addressed. Issue as directed. Auction-ID: A3-50009-139
Consisting of 3 outer boxes containing 6x 250 sheets, 1 outer box containing 3x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-119
Including 1 box addressed. Auction-ID: A3-50009-128
Consisting of 3 outer cartons containing 4x 125 sheets, 1 outer carton containing 2x 125 sheets Lying in original packaging. Auction-ID: A3-50009-111
Consisting of 4 outer boxes containing 6x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-108
Including IGEPA, PAPYRUS, FEDRIGONI, IDEM, in various sizes and designs including addressed. Lying on 8 pallets, including addressed. Auction-ID: A3-50009-141
Consisting of 4 outer boxes containing 6x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-105
Consisting of: 3x JT 9300 CG-PT, including 1 box addressed, 2x WW300 Auction-ID: A3-50009-132
Consisting of 3 outer cartons containing 6x 125 sheets, 1 outer carton containing 3x 125 sheets Lying in original packaging. Auction-ID: A3-50009-115
Consisting of 4 outer boxes containing 4x 125 sheets. Lying in original closed packaging. Auction-ID: A3-50009-110
Approximately 28 rolls. Including IGEPA, DESARDI, OCÉ, EMBLEM, in various sizes and designs including addressed. Lying on 6 pallets. Auction-ID: A3-50009-144
A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...
Pressure plate punch Beil 780/425-S-H-AP2; cleaned and tested; die-cut 780 and 425 mm autoplate; Investment Contact. Plate punch hatchet 780/425-S-H-AP2; cleaned and checked; punch size 780 and 425mm Autoplate; contact for plate.
Consisting of 3 outer boxes containing 4x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-116
Including IGEPA, PAPYRUS, RIVES, HP, in various sizes and designs including addressed. Lying on 6 plant carts (not included) and 1 pallet. Auction-ID: A3-50009-143
Consisting of 5 outer boxes containing 5x 125 sheets. Lying in original closed packaging. Auction-ID: A3-50009-113
Consisting of 4 outer boxes containing 6x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-107
Buser Rotary Printing Machine (Switzerland) Model: CH-3428 Type: R5B E 1850/24L Year: 1997 Printing: Blades Blanket newly installed Conveyor in Good condition Colours: 24 Open Bearing with Repeats: 640, 720, 820, 914, 1018 Repeat Gears: all Repeats 12 sets available Sequgee: Different Sizes (1 Lot) Entry with Dust Suction Slot High Efficiency 3 pass Two Dryer Chambers with Gas Heated Sequgee Washer 01 Set Screen Washer 01 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Consisting of 4 outer boxes containing 4x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-117
Consisting of 4 outer boxes containing 5x 125 sheets. Lying in original closed packaging. Auction-ID: A3-50009-112
Consisting of 4 outer boxes containing 6x 125 sheets. Lying in original closed packaging. Auction-ID: A3-50009-114
Consisting of 4 outer boxes containing 6x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-106
Including Xerox, Including various cleaners, filters, brush belts and developpers, Lying in metal filing cabinet, filing cabinet included Auction-ID: A3-50009-186
Including 1 box addressed. Auction-ID: A3-50009-129
Including with slide 22, 40, 45, 57, 60, 73cm. Complete with 4 metal bases. Auction-ID: A3-50009-167
Consisting of 4 outer boxes containing 6x 250 sheets. Lying in original closed packaging. Auction-ID: A3-50009-118
Total actual Printing hours, only 26,000, Specifications:, Infeed Conveyor for feeding Vertical Lid Stacks, Robotic removal of Lids from stack to Print Unit Conveyor, Auto-Denester Unit, No Lid no Ink and No Lid no Print System, ARCOTEC CG20-2 Pretreatment station, Main 6-Color Print Unit, Speed Control for Ink Fountain Rollers, Printing Roller self-cleaning device, Max. speed 30,000 Lids/ hr (depending on Lid size & shape), Max. Lid dia. Ø 200 mm, Min. Lid dia. Ø 50 mm, Max. Lid Height 25 mm, Max. Rectangular Lid size: 200 x 200 mm, Max. Printing dimensions: 180 x 180 mm, No. of Printing Blankets 4, UV Tunnel TUV 0077-99, UV-Tunnel power rating : 8 kW, Main printer power rating: 20kW, Polytype Counter/ Stacker unit, delivers Counted Vertical Stacks., 400 V 3phase, 50 Hz,, Printing Plate Pre-registration Unit., Max Lid dia: Ø 200 mm, Min Lid dia: Ø 50 mm, Max Lid Height: 25 mm, Max R ...
Consisting of: 3x 250 sheets 160g/m2, 3x 200 sheets 200g/m2, 125 sheets 250g/m2, 3x 250 sheets 120g/m2 in various sizes, lying in 4 boxes Auction-ID: A3-50009-122
Heidelberg SM 74-5PH Year: 1997 Counter: 129mio Size: 52x74cm Autoplate Alcolor Technotrans cooling All auto. Washers IR dryer CPC 1.04 Cptronic Alphatronic powdering
Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90
Equipped for die cutting with inking unit Size: 46 x 58,5 cm Weight: 3300 kg Power Req.: 380 V / 50 Hz Power Requirement: 3,5 kW Space Requirement 2800 x 1700 x 1700 mm
Equipped for die cutting with inking unit Size: 40 x 57 cm Weight: 2800 kg Power Req.: 380 V / 50 Hz Power Requirement: 3,5 kW Space Requirement 2800 x 1700 x 1700 mm
Heidelberg OHT A4 size Original Heidelberg Hotfoilsystem
Bacher 2045 Registerpunching Rigister punching width: 425mm Max plate width: 800mm
Nilpeter FB 4200 S UV dryers (GEW) all stations Corona Treater 2 Die Stations Sheeting Station Roll Lift 1 Waste Rewind 1 Product Rewind with Roll lift Magnetic Dies
Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement.
Reference Num.: 4099 Brand: Heidelberg Type: KS Cylinder 38x52 Construction year: 1960 Size: 38 x 52 mm Available: directly Status: Not in production Location: Deutschland Sheet size: max 38 x 52 mm Total weight: kg 3,500 / lbs 7,716
We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...
Auction-ID: A1-50700-27
maximum number of results exceeded
please refine your search
10 € 
