126,679 used machines on RESALE, but how to find them? Machine Search
This DMG ecoMill 800v was manufactured in 2016. It features an impressive X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG ecoMill 800v vertical machining centre we have for sale. Contact us for further details.
Manufacturer: Keyence Model: IM 8020 Year of Manufacture: 2023 Find more here - / Contact us at -
This 3-axis KOVOSVIT MAS MCV 800 QUICK was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 550 mm. The machine includes a robust table size of 1000 x 500 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 800 QUICK vertical machining centre we have for sale. Contact us for further details.
General SKU268N284 MakeKLEIN VAKUUMTECHNIK GMBH No.8765 Year of construction2000 Mounted on framecheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume235 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature180 Number of compartments:1 Capacity235 Ltr Internal width600mm Internal depth650mm Internal height600mm Electric heatingcheck With trays2 MaterialStainless steel Information LocationBarneveld Floorspace1,2 x 0,9 M Total height2,0 M Extra Specificationswith vacuum pump, brand Leybold, type D16BDrying ovensKlein VakuumtecnikDryers > Drying ovensBrand > Klein Vakuumtecnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine i ...
This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine.
General SKU316S539 MakeAPV Products LocationBarneveld Type884 Pressure Working pressure10.34 Bar Working pressure jacket10.34 Bar Main Features MaterialStainless steel Motor11 KW Surface2.7 m2 Specified Features - Scraped surface heat exchanger Scraped surface heat exchanger(2x) Number of stages:2 Heating surface2,7 m2 Cylinder sizesdia. ? x 2050 Max. temperature204 degr. C With jacketcheck Max. temperature204 degr. C Inletdia. 70 mm Outletdia. 70 mm Motor11 kW 380-400/660-690 Volt (2x) Speed207 rpm Information No.9150 Year of construction1995 Mounted on framecheck Floorspace3,7x1 M Total height1,5 M Weight1900 KgScraped surface heat exchangersAPV ProductsHeat exchangers > Scraped surface heat exchangersBrand > APV Products What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any d ...
This 4-axis MCM CLOCK 800 MP4 was manufactured in 2000. It features a Fanuc 16 I control, X-axis travel of 700 mm, Y-axis travel of 700 mm, Z-axis travel of 800 mm, and a B-axis rotation of 366°. Equipped with a high-speed spindle at 20,000 rpm and a high-pressure system at 65 Bar. It includes a chip evacuator and a tool magazine with 72 positions. Contact us for more information about this machine.
General SKUR1215 LocationBarneveld MakeDiosna (D) Main Features MaterialStainless steel Volume800 Ltr. Motor55 KW Specified Features - Universal mixer MaterialStainless steel 1.4401 (316) Universal mixercheck Capacity800 ltr. Vessel sizesdia. 1200x700mm With covercheck Inletdia. 250mm (1x) dia. 20mm (1x) dia. 100mm (1x) dia 50mm (1x) dia. 32mm (2x) Pneumatic operated outletcheck Outletdia. 200mm With motor55 kW 400 volt (Ex) Rotor speed127 rpm With lump breakercheck With motor13 / 16 kW 400 volt (Ex) Rotor speed1435 / 2930 rpm Information TypeP-800B Mach.No.294-009 Year of construction2004 Mounted on framecheck With switchgearcheck Floorspace2,7x1,9 M Total height2,9 M Weight5000 Kg ATEX compatiblecheckUniversal mixersDiosnaMixers > Universal mixersBrand > Diosna What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compa ...
This 3-axis Dugard 850VMC was manufactured in 2007. It features a maximum spindle speed of 8,000 rpm and an impressive X/Y/Z travel of 850 x 520 x 510 mm. The machine includes a robust table size of 1000 x 510 mm. If you are looking to get high-quality machining capabilities, consider the Dugard 850VMC vertical machining centre we have for sale. Contact us for further details.
General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...
This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine.
General SKU219N105 MakeRhewa Type82basic T5646 TC7033 Mach.No.103758 Main Features MaterialMild steel Specified Features - Miscellaneous transport MaterialMild steel Miscellaneous transport Capacity0,4 - 150 KG Information LocationBarneveld Extra Specifications230VAC/50|60Hz/15VAMiscellaneous transportRhewaConveying systems > Miscellaneous transportBrand > Rhewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.
SIPA Band Saw Model 800 TOP made of steel: - upper spoke flywheel, full lower flywheel - Motor 4 kW / 5.5 HP, 380 volts - with upper and lower blade guide - tilting table
This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.
Key data: 800 kN
Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Dimensions: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Tool milling machine MAHO MH 800 -Travel X/Y/Z 700-350-450mm -Table surface 940x510mm -Spindle holder SK 40 -Spindle speeds 32-1600 rpm -Automatic longitudinal/transverse feeds -Automatic feed / vertical milling head -Coolant device -Various tool holders -More technical data / See photos Dimensions: LxWxH 1.9x1.7x1.9 meters / Weight: 3500Kg Errors / input errors excepted Hjbkn Ausvbrf Ae S Tsl
WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg
Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel ...
Key data: 1000 kN
Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started b ...
General SKU203S014 MakeFilmac srl S/L Filtration (It) LocationBarneveld CEcheck TypeFiltropressa BC-800.40(35).25 Pressure Working pressure16 Bar Main Features MaterialPolypropylene Pressure16 Bar Surface33.6 m2 Specified Features - Filterpress Filter presscheck Filter surface38,3 m² Recessed chamber platescheck Number of platens35 Internal platen sizes740x740 mm External platen sizes800x800 mm Platen thickness60 mm With membranes on platenscheck Cake capacity191,6 Ltr. Central inletdia. 80 mm Connectionsdia. 80 mm With outlets on platenscheck Hydraulic closingcheck With hydraulic unitcheck Motor14,4 kW 230/400 Volt MaterialPolypropylene Information No.91137 Year of construction2000 With switchgearas is Floorspace5x1,6 m Total height2 m Weight4500 kgFilterpressesFilmacFilters > FilterpressesBrand > Filmac What you can expect from Foeth: -- Machine is ...
x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table surface area: 940 x 510 mm spindle taper: SK 40 spindle turning speed range: 32 - 1600 U/min feed - longitudinal/cross: 8 - 400 mm/min feeds vertical: 4 - 200 mm/min total power requirement: 4,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 800 kN
Arburg 420C 800-250 Year of Make: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Euromap 12 Robot interface Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
Arburg 420C 800-250 with the Wittmann W721 robot Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Original Tool Crane Robot Wittmann W721 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Pu ...
Key data: 1600 kN
Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2385 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 160 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimeta ...
used
Key data: 800 kN
Arburg 420C 800-250 with the Anvil+Langbein sprue picker Year of Make: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On ...
Arburg 1200T 800-150 / Vertical injection moulding machine with the rotary table Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Air Valve x 6 Hydraulic core pull x 6 Control with hot runners Hardened injection unit - Bimetal Rotary table diameter: 1200 mm Kistler Sensor - Tool Pressure Control Machine has been serviced by the authorized service Arburg in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pumps/motor: 22 kW Heating capacity: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before they are sold. It is possibl ...
Key data: 800 kN
Arburg 420S 800-350 Year of Make: 2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Dimensions: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Arburg 420C 800-250 Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 1300 kN
Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Key data: 2000 kN
Arburg 570H 2000-800 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2011 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lu ...
Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...
Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.
CNC Vertical Machining Center "BRIDGEPORT VMC 800" With track control Heidenhain TNC 410 Year of Make: 2000 Travels: X 800 Y 500 Z 500 Speed range: 0 – 10,000 rpm infinitely variable With the following accessories: Rigid angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 magazine positions ( SK 40 ) Full protection cabin with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Coolant device with reinforced pump 20 bar Chip conveyor Operating instructions
Veneer technology Wolkenstein veneer assembling machine LZM-LA SE 800 ex location for sale.
We offer industrial equipment for restaurants, bakeries, cafes. Everything is in working order, used. We are open to negotiations on price and delivery. Refrigerator NOVUM, 805L
6 feeders, Hand feeder, Cover feeder, Stitching unit, 2x 52/8 stitching heads, Trimmer, Spare knifes, books tools and standard parts Machine nr: 08.004
FOR SALE 2 ENGINE MARINE IVECO YEAR 1999 HOURS 15 000 LOADED NOW IN FRANCE
Key data: 5000 mm, 8000 mm, 4000 mm
Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...
Complete plant (production) for paving stones: Gravel feed Mixer Main Engine 844AZ Stacking system Strapping system
Manufacturer: Terex Finlay Model: 883 Year of Manufacture: 2010 Machine Type : Mobile heavy duty screener Operating hours: 8867 h Find more here - / Contact us at -
This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information.
Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details.
Manufacturer: Keyence Model: IM-8000 Type: Image Dimension Measurement System Software Version: B-13.0.0.28-11.07-20.07.09.01 / A2.05-A1.27-A3.03-9B.06-9B.06-02.01-03.02 Sensor: 20-megapixel CMOS Stage Size: 300 x 200 mm Measurement Capacity: Up to 300 features in a single measurement cycle Condition: Used, fully functional Find more here - / Contact us at -
CNC vertical machining center Type: VCE 800 Pro Manufacturer: GF Mikron Year: 2016 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 540 mm Table: 910 x 500 mm Max table load: 1100 kg Max spindle speed: 10000 rpm Tool magazine: 24 positions Machine weight: 5000 kg Cooling and air through the center of the spindle. Tool probe Chip conveyor Machine in good condition, under power Find more here - / Contact us at -
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1475 mm Free frontal opening L-R: 3700 mm Free lateral opening F-B: 2300 mm Table surface area : 3600 x 2200 mm Slide area: 3500 x 2070 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Number of strokes: 7 - 21 s.p.m. Required power: kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton
pressure: 800 t distance between columns: 3160 mm stroke: 1100 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mm table surface area: 3100 x 1900 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in table: 150 mm ram surface: 3100 x 1900 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
