printing 8 colors used for sale

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information.

Key data: 4 KW

The Nord SK 112M/8-2 BRE 40 TF is a pole-switchable three-phase asynchronous motor from NORD DRIVESYSTEMS. Technical details Motor type: Pole-switchable motor for two fixed speeds. Number of poles: 8/2-pin (low/high speed). Power: Typically approx. 4.0 kW at high speed (reference value for 112M size). Brake (BRE40): Equipped with a spring-applied brake and a braking torque of 40 Nm. Motor Protection (TF): Integrated thermistor (PTS) to monitor winding temperature. Additional options (WUTFZ): Customer-specific winding or fan modifications (often for operation on frequency converters or special cooling types). UNUSED

This Arburg 470 A 800-170 was manufactured in 2008. A vertical injection moulding machine with a closing force of 80 tons, operating on 400 V 3∼, 50 Hz. It features a total connected load of 69 kVA. Consider the opportunity to buy this Arburg 470 A 800-170 vertical injection moulding machine. Contact us for more information.

Key data: 3000 mm, 850 mm, 800 mm

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.

This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information.

fire: Taurus, model: C872HD, Year of manufacture: 2010, box length: 7.0 meters, Box / Bale section: 900 x 600 mm, Pre-compression device: Sheet pre-compressor, Shearing force: 800 tons

This Arburg Allrounder 1200T 800-150 was manufactured in 2006. A vertical injection moulding machine, it offers robust functionality for specialized plastic processing tasks. Consider the opportunity to buy this Arburg Allrounder 1200T 800-150 vertical injection moulding machine. Contact us for more information.

Milling machine Röders RXP 800 DS BJ "007

This DEMAG Systec 210/580-840 was manufactured in 2019. Its a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information.

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x Pallet rack trusses, used Material colour: grey INP profile: 80 x 42 mm Truss Type: TRV1-180-08-I Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per pair of trusses 2,700 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information.

General SKU347X811 LocationBarneveld CEcheck Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m² Number of sieve decks:1 Sieve sizes810 mm With covercheck Inletø 200 mm Outletø 215 mm Drive vibro motorcheck Motorcheck 380 V With extra sieve decks11 (150 µm: 300 µm: 315 µm: 2x 1,00 mm: 1,30 mm: 1,40 mm: 2x 2 mm: 2 x 3 mm) 3 mm MaterialStainless steel 1.4404 (316L) Information MakeRitec Year of construction1994 Mounted on stainl. st. framecheck With switchcheck Floor space1,20 x 1,00 m Total height1,25 mVibro sieves-Sieves > Vibro sievesBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

This 4-axis Mazak VTC 800/30 SR was manufactured in 2016, featuring a robust vertical machining center with a table width of 3,500 mm and length of 820 mm. It boasts a maximum speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine includes a 30-position tool changer and can handle a maximum tool weight of 8 kgf. Consider the opportunity to buy this Mazak VTC 800/30 SR vertical machining center. Contact us for more information.

This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information.

This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information.

This Arburg 470 S 800-170 was manufactured in 2010. A hydraulic injection moulding machine featuring a clamping force of 80 tons and tiebar spacing of 470x470 mm. It operates on 400 V 3~ 50 Hz with a total connected load of 76 kW. Consider the opportunity to buy this Arburg 470 S 800-170 hydraulic injection moulding machine. Contact us for more information.

General SKU311X478 MakeRiera Nadeu LocationBarneveld CEcheck TypeRina 700F 800X400 PI Main Features MaterialHastelloy Motor37 KW Inlet diameter100 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Basket sizesø 800 mm Max. loading weight125 kg Motor37 kW (400 V, 1480 rpm, (Ex)) Max. basket speed2150 rpm Hydraulic operatedcheck With hydraulic unitcheck InletDN100 Solids outletDN150 Liquid outletDN100 MaterialStainless steel 2.4602 (Hastelloy C-22) Information No.10573 / P19 / 00718 Year of construction2020 Mounted on foundation platecheck Floorspace2,626 x 2,250 m Total height1,930 m Weight8900 kg Extra SpecificationsProduct density 1250 kg/m3, G force 2000 G, :Peeling centrifugesRiera NadeuCentrifuges > Peeling centrifugesBrand > Riera Nadeu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to ...

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

General SKU410X1241 LocationBarneveld CEcheck MakeAzo Main Features MaterialStainless steel Motor0.15 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Bag dump stations Hopper sizesø 800x600 mm Inlet800x500 mm Outletø 600 mm With vibro motor0,15 kW (400 V, 2650 rpm) Information TypeET 800 H VR No.1394703-01 Year of construction2018 Floorspace1,20x1,00 m Total height1,20 m Weight350 kg Extra SpecificationsBagdump station, volume 200 l., with vibro sieve, 2x sieve deck, nylon, : perforation 0,3x0,3 mm and 0,5x0,5 mm :Bag dump stationsAZODosing units > Bag dump stationsBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barnev ...

Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - / Contact us at -

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

Envelope inserting machine Pitney Bowes Di 830, envelop format: min: 88 x 220 mm, max: 164 x 242 mm, max 3000 cycles per hour, very good condition, well maintained and in production ready condition.

Key data: 3200 kN, 309 g/PS, 50 mm

Production Line Manufacturing Coffee Capsules NESPRESSO Consisting of the following components: Pos. 01) Injection moulds for capsules, manufacturer: FOSTAG AG 1.0 pcs tool with 16 cavities 1.0 pcs tool with 32 cavities Pos. 02) Two-component injection moulding machine, Bcobrsw Nriue Rvf Nyju Manufacturer: ARBURG, Type: 720A3200-800, Year of manufacture: 2017 The capsules are made as falling parts.

Stitch type: double lockstitch, number of needles: 2, max. stitch length: 12mm, sewing speed: 2500stitches/min, presser foot lift height: 9mm, clearance A/B: 10mm/20mm, needle spacing range: 3mm-30mm, needle system: 134-35. Machine dimensions X/Y/Z: approx. 1100mm/600mm/1700mm, weight: approx. 75kg. On-site inspection is possible.

Key data: 1000 , 3420 , 110

DEMAG SUMITOMO ERGOTECH 1000 T Injection Molding Machine - Year 2001 Machine with very low working hours Type: 1000-8000 NC4 Clamping Force: 1000 T / 10 000 KN Screw Diameter: 110 mm Theoretical Injection Volume: 3801 cm³ Injection weight. : 3420 gr Opening Stroke: 1250 mm Daylight : 2450 mm Distance Between Tie bar : 1400 x 1120 mm Platen Dimensions: 1950 x 1670 mm Mold tickness min/max : 500 /1200 mm Total Installed Power: 110 kW Oil Capacity: 2000 L Dimensions: 13.2 m x 3,20 m x 2,90 m Weight: 63 tons Machine sold with a STAR robot

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

sheet width - max.: 0850 mm coil weight: 5,00 t coil internal dia.: mm Belt thickness: 1,00 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Including coil lifter, feed unit, control panel, hydraulic unit, control cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 A, 760 , 60

Refurbished OPS Ingersoll Gantry 800 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, have been completely renewed. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

ACS850-04-290A-5+E210+J400, ser.nr. 1152901315, ACS880-01-246A-3+E200, 132kW, 241A, ser.nr. 1174301299

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

CNC vertical machining center Type: MCV 800 QUICK Manufacturer: MAS Year: 2018 Control: Heidenhain TNC 620 X: 800 mm Y: 500 mm Z: 550 mm Table: 1000 x 500 mm Max table load: 600 kg Spindle speed: 12000 rpm Spindle cone: ISO 40 Tool magazine: 24 positions Workpiece + tool probe Heidenhain TS/TT 460 Central automatic lubrication Cooling through the spindle center (20 Bar). Machine in good condition, under powet Find more here - / Contact us at -

Diesel Generator 8kW 230V 50Hz Weight 530kg

Technical data Pressure: 4.5 kN Table surface: Length: 170 mm Width: 145 mm Depth of throat: 100 mm Overall dimensions machine: Length: 380 mm Width: 300 mm Height: 700 mm

General SKU397X1141 MakeDSP TypeEF800 No.WS-153 Mach.No.WS-153 Year of construction1999 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4571 (316Ti) Nutsche filtercheck Nutsche filter/dryercheck Filter surface0.5 m2 Capacity400 l Vessel sizesø 800 x 620 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletcheck With jacketcheck Max. temperature165°C Cake capacity400 l Information LocationBarneveld Mounted on wheelscheck Floorspace1,52 x 0,8 m Total height2 mNutsche filtersDSPFilters > Nutsche filtersBrand > DSP What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ma ...

B&A REF: 9291 TON: 160 SCREW DIAMETER: 50MM SHOT WEIGHT: 402 STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 160MM CONTROLS: NC5 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 SERVO DRIVE HEATING CAPACITY: 14.8KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

General SKU397W1234 MakeMinox LocationBarneveld CEcheck TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 With covercheck InletDia. 100/200 mm OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10695 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,50 m Weight180 kg Extra SpecificationsWithout sieveVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...

General SKU397W1235 LocationBarneveld CEcheck MakeMinox TypeMTS-V2-800/1 Main Features MaterialStainless steel Surface0.5 m2 Sizes diameter800 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5m² Number of sieve decks:1 OutletDia. 300 mm Drive vibro motor2x 0,22 kW, 230-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) Information No.X10696 Year of construction2020 Mounted on mild steel framecheck Floor space1,40x1,00 m Total height0,40 m Weight190 kg Extra SpecificationsWithout sieve and coverVibro sievesMinoxSieves > Vibro sievesBrand > Minox What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU337U832 MakeIpros doo Posoda LocationBarneveld TypePosoda 80 L Pressure Working pressure0 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor0.37 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity112 ltr Vessel sizesDia. 450x500 mm Dished bottomcheck Dished top sidecheck With covercheck DN 400 Top connectionscheck 30 mm Outletcheck 20 mm With jacketcheck Volume 17 Ltr. Max. temperature80ºC With propellor stirrercheck magnetic stirer Motor230/400 volt, 0,37 kW, 925 rpm Speed mixing shaft925 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) Information No.P342/04 Year of construction2004 Mounted on legscheck with wheels With switchgearcheck Floorspace0.78x0,78 m Total height1,2 m Weight290 kgStirring vesselsIpros dooStirring vessels > Stirring vesselsBrand > ...

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Injection moulding machine Arburg 820S 4000-4600 BJ 2016

Various used Lenze frequency converters available Tested before delivery (or preset to your engine)

B&A REF: 9273 TON: 210 SCREW DIAMETER: 52MM SHOT WEIGHT: 435 STROKE VOLUME: 480CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 710 X 780MM DBTB: 510 X 570MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 540MM MAX DAYLIGHT: 1170MM EJECTOR STROKE: 225MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 HEATING CAPACITY: 20KW

B&A REF: 9271 TON:800 SCREW DIAMETER: 110MM SHOT WEIGHT: 4720 STROKE VOLUME: 5160CM3 INJECTION PRESSURE: 1620AR PLATEN SIZES: 1550 X 1400MM DBTB: 1100 X 950MM MIN MOULD HEIGHT: 400MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1080MM MAX DAYLIGHT: 2180MM EJECTOR STROKE: 350MM CONTROLS: TACTUS CORE PULLING: 3 AIR VALVES: 4 MOTOR: 37 + 37 HEATING CAPACITY:37 KW ROBOT : STYRAM S10-L SERVO SCREW DRIVE: ELECTRIC

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

4-tons afroller Richtunit (6 + 5 rollen) amp; snijunit (3 snijmessen)

This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine.

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.

This WAGNER WDE 800x2000 was manufactured in 2010. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Ideal for those looking to enhance their turning capabilities. Contact us for more information.