printing 8 colors used for sale

Block moulding machine Type: 860 AZ Manufacturer: Zenith Year: 1988 The board machine has been operated continuously at the same location since it was commissioned in 1988. For sale is not only the block machine itself but also the entire production line. The system can be used in full after purchase. The block machine was operated in a two-shift system until the end of 2023 and was then decommissioned. The plant is still complete and can be inspected at any time upon request. MACHINE DATA Block forming machine: Board machine from manufacturer Zenith, type 860 AZ, year of manufacture 1988 Production of core and face mix Control system: Simatic S5 with Zenith visualization Board size: 1,400 × 950 mm Maximum product height: 14 cm Quick mould clamping system, pneumatic Production line: Hydraulic pusher with proportional valves on the wet side Elevator with chain transport, ...

Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - .ucymachines/ Contact us at - sales@ucymachines

1998 Sato Elektronik SATRONIK CNC 801 Flame cutting machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Drive type: Chain overdrive Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in ...

Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

The scope of delivery includes: 01x Wooden beams, used Species: Spruce / Fir Cross-section: approx. 200 x 100mm Total length: approx. 2,800 mm Weight | Pcs.: approx. 25.67 kg The price shown corresponds to the pick-up price for a wooden beam in the specified dimensions. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Engine Brand: DETROIT DIESEL, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-12v92ta-812 3-7400-used/830, , = More information =, , Type: Engine, Empty weight: 2.350 kg, Type number: 12V92TA 8123-7400

Key data: 835 mm, 510 mm, 510 mm

Fully Functional CNC Milling Machine Machining Center Vertical DMG DMC 835 V Year of construction 2006 Control: SINUMERIK 840 D Powerline Spindle speed: 12,000 rpm Spindle motor: 14 kW X - Travel: 835 mm Y - Travel: 510 mm Z - Travel: 510 mm A-axis: available Rapid traverse: 30 m/min Tool holder: SK 40 Tool changing device: 30 Table load: 800 kg Clamping area: 1,000 x 560 mm Operating hours: 49,660 | 12,902 h (30.01.2025) Footprint of the machine: 2,100 x 2,700 mm Machine weight: approx. 4,200 kg Equipment SIEMENS 840D ShopMill Linear scales Electronic handwheel IKM – 25 bar / 30 l/min Conveyor Canopy Location of the machine: 76661 Philippsburg The machine can be viewed on site at any time. This is always desired. We would love to hear from you.

MBO foldering machine T 800, config.: 6-4, built 2004, format: max: 78 x 120; min: 15 x 25 cm with Piab air system , serial equipment, slitting shafts in all units and manuals. In very good condition technically as well as folding rollers. More photos on request. Navigator control unit MBO T 800.1-1-78/6- first folding unit 6 pockets auto adjustable MBO T 800.1-2-78/4- second unit 4 pockets manual adjustable Can ship worldwide.

BT pallet lifter, max. lift 800 kg to up to 600mm. In very good condition, excellent quality steel from Sweden.

MBO folder type T 800 6-4, built 2005. With PIAB air system, Navigator control, steel plate in feeder, serial equipment-slitting shafts and manuals. Configuration: 1. MBO T 800 1-1-78/6: folding unit 1 have 6 pockets that can be automatically adjusted 2. MBO T800 1-2-78/4: folding unit 2 have 4 pockets that are manually adjusted 3 MBO Stream delivery. TESTED. All rollers in very good condition. One auto pocket needs new servo motor. Available immediately. Can ship worldwide.

Single pass - progressive honing machine, SUNNEN MHS 840 (like VSS 84), overhaul and electronic retrofit (see video and photos), 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy, Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

- max. open blacnk width 800 mm - straigh line - automatic crash lock bottom - gluing system with discs - machine in production

Key data: 600 mm, 450 mm, 400 mm

x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm Table size: 850 x 440 mm Spindle holder: SK 40 Control: HEIDENHAIN TNC 355 Spindle speeds: 20 - 4000 rpm Spindle motor: 5.9 kW Quill stroke: 80 mm Feeds - longitudinal/transverse/vertical: 1 - 2000 mm/min Feed force x/y/z: 7200 N Rapid traverse longitudinal and transverse: 10 m/min Rapid traverse vertical: 10 m/min Total power requirement: 12 kW Machine weight approx.: 2.5 t Dimensions L x W x H: 2.7 x 2.5 x 2.0 m Handwheel, coolant device

Manufacturer: Ziersch Model: ZT 820 Year of Manufacture: 2008 Type of Machine: Grinding Machine Certification: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

MK Belt conveyor Förderband 8946-800-780 RA2355 Manufacturer: MK Type: GUF-P 2041 AF/8946/700 Year of manufacture: 2022 Condition: as good as new Motor: fully functional conveyor length (FL): 8946 mm nominal / external width (NB): 800 mm belt width (GB): 780 mm overall height (BH): 100 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 1,5 380V Conveyor speed: Frequency converter for stepless speed control Drive: head drive Optional: supports Side guides Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2022 condition: new Conveying length in mm: 8946 Nominal / outside width in mm: 700 Belt width in mm: 690 Driven: YES Engine type: SEW Eurodrive KW: 1,5/S1 Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, professional advice, simply get in touch with us. ...

Pallet roller conveyor Accumulating 7500-1000-840 RA2349 Conveyor length (FL): 7500 mm Roller width (RB): 840 mm Outer width/nominal width (NB): 1000 mm Roller spacing / pitch 175 mm Frame height: 160 mm Current storage space size approx. 900 mm 8 storage spaces Storage mechanism can be converted for other storage space sizes, e.g. 1200 mm for Euro pallets Length can be extended/reduced. Several units available single roller drive chain, so that several elements can be driven with one motor. for pallet weights up to 1000 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 1,1 kW, 380-500 V condition: good (used) Conveying length in mm: 7500 Nominal / outside width in mm: 1000 Roll width in mm: 840 Roll division in mm: 175 Driven: YES sc ...