printing 8 colors used for sale

; Gross weight [kg]: 1250; Engine: JCB 448 TWGA; Accessories: Control Panel, Control cabinet including DSE panel and start-stop (shipped loose), Remote start ready, 12V starting motor and alternator, Double and switchable fuel filter, Pre-filter (shipped loose), Double walled fuel lines with leakage detection, Oil d

; Gross weight [kg]: 6265; Engine: Scania DC16 078A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1160

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 420 mm -Item No.: 829676.44-01 -Groove width: 37 mm -Hole: Ø 70 x 55 mm -Quantity: 1x pulley available -Dimensions: Ø 420 x 50 mm -Weight: 20.1 kg

Heidenhain EXE 602E 246 842-02

Ref.nr: 00911 Name of the system Vertical Inside Broaching Machine The electromechanically driven broaching machine is suitable for the precise and economical production of internal profiles, keyways and gears. Thanks to their robust construction, very smooth running and automated process sequences, it is ideally suited for use in series production. Manufacturer: Frömag Model Type FSR 6-800 MZB-PPC Year of construction 2008 Holder for three broaching needles Hub 800 mm aVersion: Vertical internal broaching machine Pulling force: 60 kN Connected load: 15 kW Control: FRÖMAG Commander PP-10 Broaching tools: 3 pieces Machine Dimensions (L x W x H): approx. 1,050 x 900 x 3,800 mm Condition Fully functional, currently dismantled, but if necessary this can also be demonstrated with the agreement of the seller Submission date Immediately

automatic baler Manufacturer: HSM Type: VK 8818 R-FU Year of construction 2021 Operating hours: approx. 81 Technical data: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Practical throughput: approx. 50 % of the previously mentioned theoretical performance Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg Optionally with: Press feed belt Manufacturer: ? from ...

Excavators, track widening for excavators, wheel spacers -Manufacturer: Eurorubber, track widening for excavators -Part No.: ZR804550 -Material: Rubber -Dimensions: see photos / technical drawing -Suitable for various excavator models -Dimensions: Ø 820 x 65 mm -Weight: 31 kg

Motor mount, electric motor console, motor bracket, electric motor mount, motor holder, motor support, base frame, machine support, substructure -Base frame: as a motor mount or similar use -Height 1780 mm -Receiver: Groove 68 x 20 mm, dimensions see photos -Dimensions: 1210/810/H1780 mm -Weight: 95 kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Electronicon, Capacitor MKP 18 µF -Type: E12.D78-401 800 -Number: 2x capacitors present -Price: per piece -Dimensions: Ø 35 x 105 mm -Weight: 0.1 kg/pc.

Manufacturer: Jac Year of manufacture: 2023 Condition: , 1 year warranty( display unit) Cutting thickness: 4-30 mm Speed: 120-240 slices per minute Control: Touchscreen Knife: Teflon round knife for versatile bread types Knife drive: Planetary-geared knife Electrical: 230V / 1Ph / 0.75kW Dimensions (T x B x H): 380 x 340 x 160 mm

This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details.

Heidenhain RON 705 18000 02S09-04 355 879-01

Heidenhain RON 806.C0000 - 36000 311 266 04

This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details.

PARKER PSA Nitrogen Generation Plant – 600 Nm³/h – 99.5% Purity (2016-2019) Complete industrial PSA Nitrogen Generation Plant designed for continuous 24/7 operation, producing high-purity nitrogen directly on-site. The plant is based on Pressure Swing Adsorption (PSA) technology and includes air compression, air treatment, nitrogen generation and storage systems, delivering up to 600 Nm³/h of nitrogen at 99.5% purity with fully automatic operation. Technical Specifications. • Technology: PSA (Pressure Swing Adsorption) • Manufacturer: Parker - Nitromatic • Nitrogen production capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum nitrogen outlet pressure: 7 bar(g) • Continuous operation: 24 hours/day • Fully automatic operation • Integrated alarm and monitoring system • Continuous oxygen analyser with purity display • Ultra-dry nitrogen produ ...

Metal Band Saw manufactured in 1993. This Friggi 2MF/AUT 800 x 800 2C features a cutting capacity of 800 x 800 mm and a round diameter of 800 mm. It is equipped with a powerful 7.4 kW saw blade motor and a hydraulic pump with a delivery rate of 58 L/min. If you are looking to get high-quality cutting capabilities, consider the Friggi 2MF/AUT 800 x 800 2C machine we have for sale. Contact us for further details.

This 3-axis Soraluce SM 8000 Bed Type Milling Machine was manufactured in 1999. It features an impressive X-axis travel of 6,250 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 1,500 mm. The machine includes a spacious table dimension of 8,000 x 1,100 mm and a powerful 30 kW spindle. If you are looking to get high-quality milling capabilities, consider the Soraluce SM 8000 machine we have for sale. Contact us for further details.

A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

For sale 2 second-hand ALSTOM electrical transformers, in good general condition, from an industrial facility. Features: Brand: ALSTOM Power: 800 kVA Type: Three-phase transformer Frequency: 50 Hz Cooling: Oil (ONAN) Condition: Pre-owned Quantity Available: 2 units These transformers are ideally suited for industrial plants, MV/LV networks, production sites, logistics platforms, biogas plants or any project requiring a reliable power supply. ✔ Hardware available immediately. ✔ Visit possible by appointment. ✔ Loading on trucks possible. ✔ Transport in France and internationally on request. Price: Contact us. Do not hesitate to contact me for more information, additional photos or to arrange a visit.

; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

weight max. in kg: 600 kg fork length: 1150 mm stroke height: 2700 mm total power requirement: ? kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...

This 5-axis Okuma LB 3000 EX MYW 800 was manufactured in 2011. It features a maximum turning diameter of 410 mm and a distance between centers of 1,020 mm. The machine includes a robust tool turret with 12 positions and a maximum spindle speed of 4,200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EX MYW 800 horizontal turning machine we have for sale. Contact us for further details.

This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details.

A CNC sinker EDM machine is offered. Travels X/Y/Z: approx. 565mm/400mm/415mm, table size: 840mm/600mm, max. workpiece weight: approx. 1000kg, max. dielectric fluid level above the table: approx. 360mm. Machine dimensions X/Y/Z: approx. 1110mm/1840mm/2780mm, machine weight: approx. 2750kg. An on-site inspection is possible.

Vogelsang MP 825 pallet racking system Vogelsang pallet racking system (type MP 825) with a total capacity of 96 pallet spaces. It offers 12 pallet spaces per field (spread over 4 levels, each with 3 Euro pallets next to each other with a field width of 2,700 mm). The facility consists of 1 basic field and 7 cultivation fields and results in a total length of approx. 22 meters. Thanks to the grating shelves, the rack can be used extremely flexibly – even for general cargo, picked goods or damaged pallets. Maximum safety is ensured by the push-through protection devices and rear wall grilles included in the scope of delivery. The perfect protection against unintentional pushing or falling of pallets and loads. Manufacturer: Vogelsang Type: MP 825 Length: 22000 mm Height: 6200 mm Depth: 1200 mm Span: 2700 mm Fields: 8 Levels: 4 incl. floor space Truss type: IN ...

Grinding wheels, grinding elements, cup wheel, double bench grinder, surface grinding wheel, bench grinder wheel -Manufacturer: Tyrolit, ceramic grinding wheel 200x50x28 mm, unused -Type: 89A 46 J 8 V53 -Number: 4x discs available -Price: per piece -Dimensions: Ø 200 x 28 mm -Weight: 2.5 kg/pc.

Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm -Height: 760 mm, adjustable, see photos -Weight: 74 kg

Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Cat No.: 26-0030EUBA Condition: Used Pieces: 1 Features Volume 1821 L Operating temperature 110 °C Material No. V2A Total height 2200 mm Diameter 1260 mm Description Topsoil: Cone base 2 crane eyes Threaded nozzle DN25 central according to DIN 11851 for CIP ball Socket 1/2" Lid DN500 Cylinder: Level indicator with bar and scale 1/2" Connection DN50 according to DIN 11851 rear top Connection DN80 according to DIN 11851 right Connection DN50 according to DIN 11851 left DN50 bottom connection PT 100 rear Underbody: Sloping cone base central Residual drain DN50 according to DIN 11851 Heating coil in the bottom inside Flange connection 25 3 profile feet fixed

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1282 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 123 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/perkins-1006-6-pump-800-bar-used/17 876, , = More information =, , Type number: 1006-6 POMP 800 BAR

We sell 1100 x 4GB and 8GB server memory PC3, ECC/RDIMM 2Rx4 please let us know. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in r ...

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Working Hours: 250 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 56 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-aifo-8041-i-40-55-pump-used/1 7874, , = More information =, , Empty weight: 895 kg, Type number: 8041 I 40.55 POMP

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-8045se-pump-580-mh-used/17870 , , = More information =, , Year of construction: 1010, Type number: 8045SE POMP 580 M³/H

Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope, sling rope -Crane rope: steel wire rope DIN 3088 8x36 Ø 16 mm -Length: 30 m -other crane ropes also available -Transport dimensions: Ø 530 x 120 mm -Weight: 31.7 kg

Diecutter for paper/enveloppes, Make Winckler & Dünnebier, Model 830E, Year 1962, Size of the table 100 x 105 cm, space under the table 18-19 cm, stroke 5-6 cm, Available direct, Size of the table: 100 x 105 cm, Space under the table: 18-19 cm, Stroke: 5-6 cm

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Air Cooled , Engine Color: Red , Working Hours: 1041 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Power: 198 Kw, Rated Speed: 2300 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218821, , = More information =, , Type number: 8JT POMP 473 M³/H