printing 8 colors used for sale

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br><br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

8 color size 1270 mm<br><br><br><br>

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

size 740 x 1040 mm<br><br><br><br>Available: short term

8-color web width 342,6 mm 9 print clambs, 8 for water colour 1 UV glue clambs for packing-Monofolie up 30µ for printing of pressure-sensitive label material bis 200µ Ceramik-Aniloxcylinder, for 120/18 bis 140/10 140/17, 160/15, 180/12, 95/15, 200/5, 255/10, 300/10, 315/11, 345/8, 500/17 Inking roller for full-size inking with cutting for slitting etc. Still in operation: Yes Available: sofort

3-color R23501/15 HOLWEG flexo printing machine model: Colorado age: 1971 available: short dated 3 printing units printing width: max. 100 cm Secare – reel rewinder Available: nach Absprache

Central printing press cylinder Print width 1270 mm Roller width 600-1310 mm Processing 1000 mm Winding 1000 mm

HEIDELBERG GTO 52 • Year: 1988 • Size: 36 x 52 cm • Serial: 694596 • Counter: 45.396.545 • Size: 36 x 52 cm • Bacher Register 22 cm • Speed: up to 8.000 sheet/h • checked • cleaned • new rollers Good Working Condition test possible Please ask for quotation: send us an email

; ready for use

Machine refurbished & test-printed! grey model with long electrical box standard machine ink unit completely dismantled and refurbished new ink and dampening rollers Rilsan oscillator rollers replaced with NEW ones machine fully refurbished and test-printed

Printing plate punch Beil 425 stand model; good condition; Punching 425mm round; with adjustable ring visor bolts; Foot pedal; Max. Plate width 97cm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

XL wide printing plate punch ( 165 cm ) for Roland and KBA presses. 4 punching modules are installed, 425 mm and 780 mm. Additional recesses and fastenings are provided for a total of 120 cm, so that a larger format can be processed; Very good, ready to use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Feeder Double printing Crabtree Marquess UV oven Maber Coater Oven of 27 m and 6 m of coolers New PLC control for machine Chain and wickets new New exit table Inghor New transition system Non stop stacker LTG Sizes 1140 x 960 mm.

Plate bend Ingkant SM 52; cleaned and tested; Table equipment; suitable for Heidelberg SM 52 plates. Plate bender SM 52; good condition; cleaned and checked; table top model; used for Heidelberg SM 52 plates.

Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates.

Printing plate development machine Koenings KTW 653; good condition, cleaned and tested; 3 brushes; inlet width 650mm; suitable for waterless panels. Plate processor Koenings KTW 653; good condition; cleaned and checked; 3 brushes; width 650mm; Used for waterless plates.

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

M. No.: 821301-10002 Equipment / further information: Hardware • OptiPrint™ Media Cleaner • Driven roller feed system with media flanges • Driven reel system with media flanges • Baskets • Rear and front media sensor • Hard disk (2 GB job space) Interface • Control panel with 8 buttons. • 4x20 character liquid crystal display. • English display language. • Metric or English units. Functionality • 16 user configurations. • Automatic alignment system. • Up to eight colors/job • OptiTrac Save Ribbon • Right side of the tape • OptiTrac colors: mirror silver and gold Cut: • Concatenation and curve smoothing to achieve better cutting quality. • OptiCut drag motion optimization. • Overlap for easy weeding. • Multiple reprint function (up to 999). • Flash Eproms With 5 cassettes and various ribbons Operating instructions

Plate punch Beil 780 S-H-APL-CTP-p; pneumatically; Punching 780mm Autoplate; puncture 11mm; suitable for MAN 700; compressed air required. Plate punch Beil 780 S-H-APL-CTP-p MAN 700; pneumatic; punch size 780mm autoplate; depht 11mm; used for MAN 700; Need pneumatic air.

Printing plate punch/lacquer plate punch for Heidelberg XL 145/162; good condition; cleaned and tested, perforation 1200mm autoplate. Plate punch/ plate punch for varnish plates for Heidelberg XL145/162; good condition; cleaned and checked; hole size 1200mm autoplate.

Printing plate development machine Agfa Elantrix 125 HX; good condition; cleaned and tested; Inlet width max.1250mm, min.200mm; Plate length max.1500mm, min.315mm; Plate thickness 0.15-0.50mm; Cooler. Plate processor Agfa Elantrix 125 HX; good condition; cleaned and checked; max plate width 1250mm, min.200mm; max.plate lenght 1500mm, min.315mm; plate thikness 0.15.0,50mm; cooling unit.

Offer consists of: - High-performance finisher DocuCutter DC-745 Duplo DocuCutter DC-745 High-performance finishers for digital color printing: - Investors: Suction/blowing air feeder with alignment line - Operation: via LCD display - PC included - Software included - Business card module - Job memory: 80 memory slots for retry jobs - Error avoidance: Ultrasonic double leaf control Control compartment Test running program Print mark reading - integrated knife 6x 2x Edge cut 4x for card cutting - Format: max. 650x370mm min. 210x210mm - Paper weight: 110-350g/sqm - Speed: 50 sheets/minute - Current: 230V / 50Hz / 2.7A, 550W - Dimensions: 3.040x1.020x1.115mm - Weight: 450kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing o ...

Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.