printing 8 colors used for sale

Electric motor, three-phase motor -Manufacturer: Holz-Her, electric motor type 80S-4 -Power: 550 W -Speed: 1350 rpm -Shaft: Ø 19 x 40 mm -Construction: B3 -Dimensions: 270/210 / H160 mm -Weight: 8.5 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Bosch, pneumatic cylinder type 0 822 351 008 -Stroke: 250 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm / M12x1.25 -Dimensions: 445/75 / H70 mm -Weight: 1.9 kg

Decentralized input module

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS8 1200 x 2200 -Price: per piece -Number: 2 pieces -Dimensions: 2240/680/H280 mm -Weight: 66 kg

Gear motor, electric motor, electric gear motor, angular gear motor, automatic band saw -Manufacturer: Ruhr gear, angular gear motor -Type: NDK 8760 -Speed: 3000 rpm -Voltage: 200 V/0.15 A -Shaft: Ø 10 x 30 mm -Accessories: V-belt attachment incl. -Dimensions: 245/160/H155 mm -Weight: 4.5 kg

transformer -Marcus: M3785OT 80C RISE -VA: 1000 VA -Frequency: 60 Hz -Voltage: 230/120 V -Price: per piece -Number: 2 pieces available -Dimensions: 160/130/H110 mm -Weight: 11.3 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 245/62/H40 mm -Weight: 1.15 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 320 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Max. Pressure: 16 bar -Price: per piece -Number: 2 pieces -Dimensions: 545/93/H93 mm -Weight: 6.75 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimensions: 640/28/H28 mm -Weight: 0.95 kg

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Excellent general condition. Used by plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting forces, low machine load... Travels x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / drive power main spindle 11 kW feed speed 0 - 30 m/min / Table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max Wzg diameter 63mm / WZG length 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, Type TS 220 / Coolant device / chip conveyor / extraction (optional) Complete enclosure Heidenhain control type TNC 426 PB digital / electronic handwheel Heidenhain HR 410

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Quantity: 2 pieces -Dimensions: 104/66/H73 mm -Weight: 0.8 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 340/30/H30 mm -Weight: 0.6 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, short stroke cylinder -Stroke: 25 mm -Piston diameter: 40 mm -Piston rod: 12 mm -Quantity: 1 piece -Dimensions: 73/55/H62 mm/piece

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

1 center grinding machine Make: Technica Model: 5100-810 Year of construction: 1988 Workpiece diameter: 150 mm Grinding depth: 5.0 mm Workpiece length: 1,100 mm Grinding spindle speed: 45,000 rpm Operating voltage: 380 V Total power requirement: 0.5 kW Machine weight approx.: 490 kg Dimensions approx.: 1,00 x 0,85 x 1,85 m

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Dimensions: 320/97/H97 mm -Weight: 4.5 kg

This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Wartsila 8L32 Oil Pump 1Piece available in our stock in Turkey Model: 1v18L36 Original in good condition

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

MTU 8V4000 Year of manufacture 2001 Current operating hours 1077, last load run January 2023, The system is installed in a container, including silencer, table cooler and piping. A 1000l fresh oil tank is installed in the container, a connection of an external tank is possible (preparations for connection have already been made) Special feature. The control system has been renewed by HGS (ComAp). Power: 1000 KVA / 800kW at Cosphi 0.8 Dimensions container; 9,60 x 3,00 x 3,21m Weight approx. 18t Dimensions superstructures; Table cooler 5.00 x 2.45 x 1.65m Weight approx. 3t / Shock absorber 4.00 x 1.80 x 0.70 Weight 0.5t

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

The scope of delivery includes: 03x Stacking container, used Manafacture: Thyssen Material color: hot-dip galvanized overall width: approx. 850 mm (outside-outside) Frame width: approx. 800 mm Usable width: approx. 780 mm total height: approx. 580 mm (floor - OK crane eye) Frame height: approx. 540 mm Usable height: approx. 400 mm Underride height: approx. 100 mm Total depth: approx. 560 mm (outside-outside) Frame depth: approx. 480 mm Usable depth: approx. 400 mm Stackable: Yes Crane eyelets: 4 pieces Diameter crane eyelets: approx. 40 mm Note: The stacking or transport containers can be bent. Furthermore, these dents, or other have damage.

Transfer folding machine H+H/MBO 820-456; good condition; cleaned and tested; for hanging; Working width 520mm; Length 340mm. Hang up conveyor folding machine H+H/MBO 820-456; good condition; cleaned and checked; for hang up; working width 520mm; length 340mm.

turning diameter: 820 mm turning length: 300 mm turning diameter over slide: 465 mm control: max. torque on the spindle: 3000 Nm turning speeds: 5,6-1120 U/min Feed: 1-5000 mm/min Rapid movement: 5000 mm/min tailstock quill taper MT: 6 3 jaw chuck Forckrath: mm steady: mm main drive motor: 50 kW diameter of main spindle: 170 mm spindle passage: 128 mm tailstock quill diameter: 125 mm tailstock quill stroke: 250 mm z-axis: 3000 mm x-axis: 550 mm total power requirement: 52 kW weight of the machine ca.: 7,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 80 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 5 pieces -Dimensions: 219/30/H30 mm -Weight: 0.40 kg/piece

Footplate, site fence foot, barrier foot -9 pieces: TL plastic footplate -Price/fee: complete -Dimensions: 820/420/H110 mm each -Weight 27 kg/piece -Total weight: 246 kg

Workbench, work table, assembly bench -Width: 2300 mm -Depth: 815 mm -Height: 845 mm -Thick worktop: 40 mm -Drawer: 1 -Cabinet door lockable: 1 -Shelves: 2 -Price: per piece -Number: 2 pieces -Weight: 114 kg/piece

Stacking boxes, stacking boxes, steel boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -Sheet metal container with: lid -Dimensions: 615/800/H910 mm -Weight: 54 kg

Frame width: 1,170 mm / height: 900 mm / frame depth: 800 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Frame profile: 85 mm Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material color: yellow Box profile: 80 x 50 mm Clear width: 1,000 mm 08x locking pins, used Finish: completely galvanized

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 50 mm -Piston rod: 20 mm -Dimensions: 280/65/H65 mm -Weight: 2.2 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Dimensions: 665/52/H52 mm -Weight: 2.45 kg

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Price: per piece -Number: 4 pieces -Dimensions: 484/53/H53 mm -Weight: 1.8 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 80 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 7 pieces -Dimensions: 230/46/H46 mm -Weight: 0.7 kg/piece

Make : Benhil Model : 8358 & 8535 Format : 25 x 41 mm 6-20g) Capacity : 510 pieces per minute Depending on weight of product Product Feed : Stainless steel Hopper and Screws Paper Feed : 90 deg Case Packer : Benhil 8535 rotary case Packer Photo centering sensor Condition : Very Good Location : Dairy Machinery UK Contact us for more information and to arrange a visit

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 200 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 6 pieces -Dimensions: 343/28/H28 mm -Weight: 0.85 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 100 mm -Piston rod: 25 mm -Price: per piece -Number: 2 pieces -Dimensions: 735/115/H115 mm -Weight: 11.7 kg/piece

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 3 pieces -Dimensions: 330/53/H53 mm -Weight: 0.30 kg/piece

Make : Benhil Model : 8304 Format : 25 x 41 mm Volume :6-20 g Capacity : 120 pieces per minute Product Feed : Currently Competition Paper Feed Semi automatic case Packer Condition : Very Good Location : Dairy Machinery UK Contact us for more information

Grinding and polishing machine for the shoemaker's profession, cleaned and tested.

Compressed air filter, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Mann air filter housing with: filter -Inlet/outlet: Ø 80/70 mm -Part Number: 43 905 63 8981 -Dimension: Ø 260/400 mm -Weight: 11.5 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Dimensions: W800/H1200/D300 mm -Braids: several -Weight: 62 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Price: per piece -Number: 2 pieces -Dimensions: 190/30/H30 mm -Weight: 0.35 kg/piece

we offer two identical emergency generators. Each is equipped with an 850 kVA Perkins genset installed in containers. a diesel tank is also possible for an extra charge. The units are fully operational and can be demonstrated at any time the second unit has 2900 operating hours

Jogger - criss-cross delivery Make Bourg Model TA 860 Year 1995 Height adjustable Angle adjustable Details criss-cross function Available direct

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 500 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Price: per piece -Number: 2 pieces -Dimensions: 725/95/H95 mm -Weight: 9.25 kg/piece

Rheon SR-2 bread and roll production line: Weigher capacity: for rolls: up to 3,600 pieces/hour for baguettes: up to 800 kg/hour for loaves: up to 1,500 kg/hour Cuprounder capacity: for rolls: up to 2,400 pieces/hour Consisting of: Rheon V4 Stress Free Divider Type VX 212-800 Year of manufacture 2010 Dough strip width 130-150 mm Product weight range approx. 50 - 2,000 g With round cutting knife With 2-row guillotine With distribution station With 2-row weighing and discharge belts With star cutter oiling With 2 flour dusters With digital control With hopper for approx. 50 kg of dough Includes RHEON CUPROUNDER TYPE SR 002 Year of manufacture 2010 Weight range for rolls approx.: 50–100 g Includes bmTEC processing table Year of manufacture 2022 Dimensions approx. W: 100 x H: 100 x L: 180 cm with wooden panels 40 cm/25 cm wide with conveyor belt ...