price longus klimaanlagen used for sale

Dosing station for lye Stabicip 0 X 1 380 V, 50 Hz; 6 bar 2 Piece Unit price 450,-both for 800,-

For Amos press 1600 3 Steück new mesh belts type 5060 22600 Mm Width 1600 mm Chain and closure polyester unit price 2250,-

CNC plasma and cutting machine SATO SATRONIK FB 2000 2,000 x 4,400 mm plasma system Kjellberg HiFocus 100, (up to 25 mm quality cut), cutting max. 40 mm, 12 mm laser cutting quality, plasma burner PerCut 170 (quick change system), THC / automatic capacitive. Hoehenregulation with Kemper suction firing table 1.5 ( 2m) x 4.0 m and suction and filter unit Price: VB The plant is located at the Bochum plant Alternative plasma cutting plant Kjellberg FineFocus 800: plasma cutting system for attachment/re-training of CNC plasma cutting systems FineFocus 800 Plus Materialstaerke: up to 80 mm, Hole cutting and quality cutting up to 45 - 50 mm, gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Price option with gas console, mac ...

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

1 piece Sideros suction system type ECO 6 HC, 9000m3/h for plasma and firing cutting systems for suction firing table from 2.5 m - 3.0 m width (at 500 mm module width) suction and filter system with integrated fan, automatic, dust-duty filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,500 m3/h and a static pressing of max. 2,500 Pa. Filter class M with a separation degree of > 99.9% (BIA use category U,S,G,C). Technical data: volume flow fan 9,000 m3/h Volume flow Filter: 4,000 m3/h Press: 2. 500 PA filter area 60 m2 filter type: PTFE membrane separation degree: > 99.9% cleaning: rotary duesen connection power: 5.5 kW, 10.7 A voltage: 3 x 400 V, 50 Hz compressed air connection: 6.0 bar sound level: < 68 dB (A) dimensions: height: 2,100 mm Depth: 1,413 mm Width: 1,413 mm Weight: 62 ...

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

Cat No. 14-0007 in a very good condition Measurements and Weight: WxHxD: 600 x 460 x 400 mm Weight approx: 44 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

C3 ultra fast blow fuse, 450A, for power electronics. Original new condition welded from clearance, fully functional. 420-all 3 units net price 155.- Info under 0170 / 2204056 Mail to fa.raupp@t-online

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

4 fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -5 stand / 16 bars -Traverse length 2.70 m -Load per level 2.4 tons -Shelf height: 3,00 m deep 1.00 1.10 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria / Eisenach (Thuringia) Lahr (Baden Württenberg) Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 200 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultatio ...

8 fields pallet shelf (used) - various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich - 9 stand / 32 bars - traverse length 2.70 m-load per level 2.4 bin shelf height: 3.00 m deep 1.00 1.10 m dismantled / verladefertigArtkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria / Eisenach (Thuringia) Lahr (Baden Württenberg) sale remains vorbehalten___Fracht / LieferungAktuelle without obligation estimated about freight costs for the German Federal territory be 200 euros. for our We can arrange a cheap, reliable carrier who delivers the goods at a price as possible to customers.For the 1:1-we vouch for us passing the dispatch or shipping costs.Self pick-up possible - after Terminabsprache.Lieferzeit 2 WochenVersand in Europe after consultation and confirmation email.Commercial customers from EU countries (Austria, Italy  ...

11 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -Stand 12 / 32 bars -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la car ...

PLASMA Suction and filtration system FILTERBLOC - TFK PL Series Special central suction and filter system for plasma smoke when burning and cutting the FILTERBLOC TFK PL series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE drawing FILTERBLOC - TFK PLASMA 40/60/80 engine power 5.5/7.5/11 KW air volume 4000/5500/6200 m3/h filter area 124/186/248 m2 Dusting area 4x/6x/8x 84 liters Automatic jet cleaning system with welding smoke class W3 24 months warranty The price information refers to the TFK PL 40 naehere information on request; ready to use

23 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -24 stand / 64 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à l ...

Laser smoke extraction and filter systems FILTERBLOC TFK LA Series Special Central suction and filter systems for laser smoke of the FILTERBLOC TFK LA series TUeV Certified manufacturer according to DIN EN ISO 15012 and CE Drawing. FILTERBLOC LASER 30/40/60 engine power 3 KW/4KW/5.5KW air volume 2500/4000/4500 m3/h filter flat 93/124/186 m2 Dusting area 3 x 84 liters/4 x 84 liters automatic jet cleaning System with welding smoke class W3 24 months warranty The price information refers to the TKF Laser 30 naehere information on request; ready for immediate use

47 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -48 stand / 128 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

95 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -96 stand / 256 beams -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la ca ...

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

New and used shipping containers in all Versions at favourable prices! We can offer used and new sea containers for sale / lease / rental from current stock: -20 ft (6m) standard box container -40 ft (12m) standard box container -40 ft (12m) high cube container -20 ft (6m) Office container -20 ft (6m) sanitary container Special designs such as double door, flat or open top are always available. A visit can be arranged at any time. Sea container are very robust and made from 2 mm corrugated rust sluggish Corten steel, which is coated with salt water resistant ship paint. They have a reinforced stacker-accessible floor that is planked with 20 mm water-resistant plywood panel made of hardwood. We can can also offer worldwide transport solutions. Please give us your delivery adress and we will send you an offer. We can modify and upgrade any type of Container in our W ...

23.6 m³ / 23600 litres steel tank coated inside. Munkadur coating, 2-component coating, 2-component Top state coated incl. good reasonably priced - used steel tank from the inside: new coat of paint and new dome cover gasket. Dimensions: Ø x 2.45 m approx. 5.50 m long The tank is with a high-quality food-approved Lined interior fully coated (Munkadur). Steel tank / container can be used as a storage tank for water, Liquid feed, whey, molasses, liquid manure, AHL, ASL, seeping juice, Rapeseed oil, edible oil, rain collection tank, etc. are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us ...

There are various new parts for King industrial head machine I-Rex for sale. new flange for drum King industrial head machine I-Rex: - Outer diameter: 310mm - Inner diameter: 40mm - Width: 25mm - Material aluminium new ripple shaft for drum King industrial head machine I-Rex: - Length: 910mm - Outer diameter: 59mm - One side bearing seat: 20mm outer diameter - Steel tinned Side plate dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex: - teflonized Side plate dough guide for pre-portioners for type TRÖ 240 for drum King industrial head machine I-Rex Plastic inner side plate Dough guide for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Aluminum side panel for pre-portions for type TRÖ 240 for drum King industrial head machine I-Rex Gear set Z 24 for pre-portioners for type TRÖ 240 for  ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Sell used hydraulic power units 5. 3 with 11 kW electric motor- 2 with 4 kW electric motor- Price per PCs. Motors from ASEA Sweden

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emerge ...

OHRA Kragarmregal NEW Negotiation price: € 1,760,-- net They offer on a shelf with a length of 4.5 m, consisting of: 4 stand with foot, 4 m high + 3 adjustable booms per stand (120 cm), load capacity 1100 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Arm length / boom 120 cm Load capacity 1100 kg / boom Load capacity per stand per side 3500 kg Over 100 meters available Heights of 2.5 m, 4 m or 6 m are available. Other compilations on request.

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

WEIBERT WJ-K315R Circular sawing machines Formatschiebetisch: 2700mm Engine power: 4 KW (5.5 HP), 400V, n = 4000 min Cutting height: 103 mm Blade: 250-315 mm swivel: 90 °-45 ° Before scoring unit: With motor WJ-S315R-4KW 2.7 SPECIAL PRICE

Technical data: -2.77 l/s, 14.7 m -Rated speed: 1440 1/min -Inlet: DN 50 -Print: DN 40 -Motor: 11 kW -2-pole New price: 16,500

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and outstanding design features of the RaptorX-SL CNC Fraes machine / CNC-Fraese with steel substructure / RaptorX-SL2200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (through-shoehe under bridge : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special larges up to 17 500 mm ( on one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to  ...

Well-preserved horizontal pillow-pack packaging machine. Very well suited for cylindrical or other elongated products. Was used to extract a sausage in foil. Please see the video. Fully functional, there is some evidence of second-hand. Price on request machine is immediately available.

Weibert WJ-ASA Professional Extraction system Power of the motor: 4 KW Suction power: 3900 m, m³/h Chip bags: 2 x 200 l Dimensions 580 x L. B. 1300 x h 2200 mm Driving device Connector 2 x 120 mm WJ-ASA Professional Special price: NET 890,-

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Weibert W7-32 professional new 5 x combination machine It should already be a Waleed! new Formatschiebetisch Pro 2300mm planing width: 320 mm Engine power: 3 400V Motors 3 KW (S1) Dressing table length: 1500 mm Drum: 3-knife-shaft of turn of the Opening of 4-230mm Cutting height: 103 mm blade 315 mm Swivel 90 °-45 ° Milling cutter: starr 90° Blower rpm: 1400/3500/6000 and 8000 U/min SPECIAL PRICE for questions regarding the machine tel. 01717100222 or 06024-80707

Specifications / Technical data S-1400/T 3-axis CNC-portal-machine and engraving machine (Attention: Pictures show the High-Z S-1400 with trapezoidal thread spindles, this differs exclusively by the spindles . With the T-variant of the high-Z CNC fraes machine, you acquire old-fashioned technology with the certain I-meat in TUeV-certified quality (EMC). The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T portalfraes machine achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can s ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Scheer FM2-3000 Scheer veneer saw 3000 mm G-2521-M3DVZ No VAT! Special price: 770,-

Cat.-No. 14-0062 in a very good condition Total Height: 1700 mm Total Length: 3750 mm Diameter: 1620 mm Height Tank Body: 1600 mm Weight: 600 kg • Material: AISI 304, Front Side Marbled, Inside IIID • with Manhole on the front 420 x 320 mm • with Fermentation Lock • with Thread Connection 1/2 • with Clap NW 40 • with outlet discharge DN 40 • with Angle Seat Butterfly Valve with Outlet DN 40 The price is for one tank. All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Cat.-No. 14-0063 in a very good condition Total Height: 1720 mm Total Length: 3600 mm Diameter: 1600 mm Height Tank Body: 1620 mm Weight: 600 kg • Material: AISI 304, Front Side Marbled, Inside IIID • with Manhole on the front 420 x 320 mm • with Fermentation Lock • with Thread Connection ½ • with Clap NW 40 • with outlet discharge DN 40 with outlet WKG 40 • with Angle Seat Butterfly Valve All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale

Seat up shy sucking machine Tennant 530 E Manufacturer: Tennant Dealer: Müller conveyors Model: 530 E Serial No.: 530-7848 Year of construction: 1998 Weight: 4,600 kg : Engine diesel The scrubbing machine is no longer fully operational, but with low Effort to be repaired or used for spare parts. New price: approx. 12,000

Kat.Nr. 14-00099 in a very good condition with Outlet Discharge 33.290 Litres in stainless steel in AISI 304 very stable construction Description: outside: marbled – inside: 2B with fermentation lock with manhole 430 x 330 mm with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level and scale with ladder rack with flat bottom with outlet discharge manufacturer: Möschle Measurements: Width: 1600 mm Depth: 7200 mm Height: 4000 mm weight: approx.. 2,5 tons All prices are valid ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale